Buscar en el registro

Employee was working with a hydraulic punch in the mining shop. The punch broke and a chip flew and cut the employees nose.

Secondary welding exposure resulted in welder's burn to eyes.

Operating dozer, pushing rock, injured back.

Operating D10 dozer, operator aggravated a bad disk in back. Re-injured old injury, bad back.

Employee was removing bolts from mill with air hammer when he pulled a muscle in his right thigh.

Two employee were visually inspecting the fly ash system for possible material blockage. One of the ee lost his focus of the hazard that exited and reached thru an open valve to clean out 60 me accumulated flynsh. He received a fracture to the right thumb when the air operated value closed unexpected.

WHILE BEING LOADED WITH THE SHOVEL, THE BUCKET STRUCK THE FRONT OF THE BOX (CANOPY END) OF THE END DUMP. THE EE RECEIVED A MUSCLE STRAIN IN HIS BACK.

EE WAS HOLDING A BLOCK OF WOOD BETWEEN BREAKOUT WRENCH AND PIPE RACK WITNESS WAS OPERATING WRENCH CONTROLS. THE DRILL IS NOISY AND CONTROL OPERATOR THOUGHT HE HEARD EE SAY OK AND MOVED WRENCH. EE S FINGER WAS CAUGHT BETWEEN WOOD AND PIPE RACK.

EMPLOYEE WAS GRINDING METAL DURING THE SHIFT AND DIDN'T REALIZE SOMETHING WAS IN HIS EYE. WENT TO THE DOCTOR THE FOLLOWING MORNING. THERE WAS SOME UNCERTAINTY CONCERNING THE DOCTOR REPORT AND IT WAS DETERMINED ON 9/1/03 TO BE REPORTABLE.

CUTTING STEEL ANGLE IRON WITH A PORTABLE HAND HELD GRINDER WITH A GUARD AND CUTTING DISK INSTALLED, STARTED A CUTTING OPERATION WHEN THE CUTTINGDISK FRACTURED. A PORTION OF THE CUTTING DISK WA S CARRIED BACK AROUND AND BELOW THE TOOL GUARD AND STRUCK THE RIGHT INDEX FINGER IN THE KNUCKLE AREA.

WAS USING AN AIR LANCE TO LOOSEN COAL IN FEEDER. THE PERSON'S HAND SLIPPED STRIKING A METAL OBJECT. THE PERSON WAS TREATED FOR A FRACTURE OF THE DIGIT FINGER ON THE RIGHT HAND. UPON FURTHER EV ALUATION FROM A LARGER MEDICAL FACILITY AND TWO MORE X-RAYS, THRE ARE NO FRACTURES, DISLOCATIONS OR RADIOPAQUE FOREIGN BODIES. THE EMPLOYEE DID NOT MISS ANY WORK AND WAS NOT ON RESTRICTED DUT

THE EMPLOYEE WAS USING AN AIR LANCE TO BLOW OUT MATERIAL FROM A CRUSHER BOWL. THE EMPLOYEE WAS WEARING SAFETY GLASSES AND A FULL FACE SHIELD. THE EMPLOYEE WAS TAKEN TO CLINIC AND RECEIVED DROP S IN EYE AND BACK TO WORK.

EE WAS INSTALLING A SHIM INTO A LATCH LEVER ON A SHOVEL BUCKET WHEN HIS THUMB WAS STRUCK (PINCHED) BY THE LATCH LEVER. EE WAS BROUGHT TO A DR. AND HE WAS TREATED WITH ELEVEN STITCHES AND THE T HUMB WAS IMMOBILIZED WITH A SPLINT.

USING A CUTTING TORCH TO BURN BOLTS OFF OF AN OVERHEAD PIPE FLANGE, A PIECE OF SLAG FELL INTO THE EMPLOYEE'S EAR, STOPPING AGAINST AND MELTING THE EAR PLUG.

A BROKEN PIPE ALLOWED SULFURIC ACID TO SPRAY ON EMPLOYEE AS SHE ACTIVATED THE ACID TRANSFER PUMP

WHILE OVERSEEING A HATCH DOOR OPENING ON A DRILL, THE EMPLOYEE REACHED INTO THE OPENING TO FREE SOME ELECTRICAL WIRE, AS HE DID THIS A WELD ON THE HYDRAULIC RAM THAT WAS OPENING THE HATCHDOOR BROKE LOOSE. THIS CAUSED THE DOOR TO COME DOWN STRIKING THE EMPLOYEE ON THE BACK OF THE HEAD CAUSING A LACERATION REQUIRING 3 SUTURES.

2 EE'S WERE TORQUEING MILL HEAD BOLTS ONE EE WASHOLDING A MAGNIFIER. THE MAGNIFIER SLIPPED OFF STRIKING THE OTHER EE IN THE UPPER LIP

PIECE OF LIMITSWITCH FROM OVERHEAD CRANE FELL STRIKING EE ON HARDHAT. EE LOST BALANCE AND FELL INTO CRUSHER CONCAVE BASKET. CRANE WAS BEING USED TO MAKE REPAIRS TO CRUSHER CONCAVE.

WHILE LIFTING SHELL LINER, PAD-EYE BROKE CAUSING CABLE TO STRIKE EE IN THE HEAD. EE SUFFERED MINER LACERATION, SUTURES REQUIRED.

EE STATED WHILE MOVING CHAMBER OF SCREENFEED PUMP, MOVING BARRELL OUT OF CHAMBER AND MOVING IT BACKWARD OVER SADDLE. I THOUGHT WE WERE OVER FAR ENOUGH AND WENT TO SET BARREL DOWN. IT CAME DOWN ON MY REIGHT FOREFINGER CAUSING IT TO BURST.

EE STATES WHEN REMOVING PLOW BOLTS FROM CUTTING EDGE, HE WAS USING HAMMER TO HOLD BOLT IN PLACE. THE HAMMER SLIPPED & THE SPINNING BOLT CUT HIS FINGER.

EE STATED THAT WHILE HE WAS POSITIONING 2 JIG FOR WELDING REPAIRS TO A SHOVEL BOOM, THE JIG SLIPPED AND PINCHED HIS FINGER

EMPLOYEE STATES THEY WERE PLACING A 8'X20' PLATE ON BURNGN TABLE W/CRANE I WAS HELPIGN GUIDE THE PLATE AND WHEN THEY STOPPED THE PLATE SHIFTED, JAMMING MY ARM BETWEEN PLATE & BURNING MACHIEN A RM.

EMPLOYEE STATES WHILE CUTTING HINGES OFF DOOR OF OLD RELAY CABINET, DOOR SPUN AROUND AND SLAPPED ME IN THE LEFT SIDE.

WHILE TRYING TO TURN BOLTING MACHINE AORUND ON RAIL, MACHINE SLIPPED & FINGER GOT SMASHED UNDER PIPE.

EE STATED THAT HE WAS INSTALLING AND 2X6 ALTERNATOR USING A 1/2" IMPACT WRENCH WITH 2 13/16" SWIVLE SOCKET. THE KEEPER PIN CAME OUT AND CONTACTED HIS LEFT HAND AND FINGER.

EE STATES THAT THE PIN CAME OUT OF IMPACT SOCKET, LOACERATING LEFT THUMB MUSCLE.

EMPLOYEE STATES THAT WHILE SHE WAS USING A PIPE THREADING MACHINE TO INSTALL AN ELBOW ON A PIECE OF PIPE, THE WRENCH SHE WAS USING SLIPPED AND SHE SMASHED HER FINGER. NOTE: THE EMPLOYEE DID N OT REPORT GETTING STITCHES UNTIL 5-4-95.

EMPLOYEE WAS WORKING ON THE PELLITIZING UPDRAFT DRYING FAN AT THE TIME OF THE INCIDENT. THE FAN WAS TAKEN DOWN AND THE SWITCH GEAR LOWERED FOR ADDITIONAL BALANCING. THE GATES WERE OPENED FOR A CCESS TO WELD A BALANCING WEIGHT TO THE FAN. EMPLOYEE WAS INSERTING A ACCESS LADDER THRU THE OPENING WHEN THE LADDER WAS STRUCK BY A FAN BLADE WHICH WAS STILL COASTING. LADDER KICKED BACK AND