Buscar en el registro

While installing a dag the chuck on the jackleg come loose bringing the jackleg back toward two miners. One miner was struck in the cheek with the jackleg

10:35am EE was jack legging to install pins and screen in the back of Upper Mahler Incline on LT3435 when the steel broke about 5in from the machine due to a flaw. The Leg fully extended. EE went over handrail at height of around 13ft 5in landing on EE's left side & hitting EE's head. Mine Rescue stabilized and transported from heading to surface on back board and cervical collar.

Miner was riding on man carrier of tractor; the tractor was traveling up a ramp when it stalled and started rolling backwards. The miner then jumped off the moving equipment spraining left ankle.

Miner was helping install long support in the ladder raise, the miner was installing a dag. The Jackleg kicked out and the dag slapped down on the miners right side of the hard hat and then the right side of the face by the right eye.

Worker was operating the controls of the power wedge with right hand while in a kneeling position in front of the axle and brake pack when the pack suddenly loosened and moved off of the axle. The pack, which weighs approximately 300 pounds, fell approxmately 20 inches before contacting workers left hand, crushing it between the brake pack and a plastic oil pan.

Using a jackleg drill when the retainer collar came off causing the jackleg to twist pulling employee's right arm causing a pain in the right elbow. Was reported as first aid but due to on going pain the miner was treated by a doctor on 10/7/2019.

Worker was using a jackleg to bolt the back in 2700-400 Mud Pond. A piece of rock about the size of a softball dislodged from the screen on the back that fell approx. 15' striking EE's hard hat and then the bridge of EE's nose. The rock caused a laceration to the bridge of EE's nose. The miner received 5 stitches and was released to work with no restrictions.

Employee caught two fingers on the right hand in a mill in the Mill Lab.

Employee was drilling hole to install ground support, when hole intercepted previously installed rock bolt. Upon contact, the machine stalled, causing it to move upwards suddenly, striking employee on left upper lip. 5 stitches received.

Employee was trouble shooting headlamp circuit on Kubota tractor. EE was standing in front of right rear tire when ee rotated ignition key. The engine started, causing the tractor to move forward, allowing the rear tire to contact left lower leg and ankle. Resulted in sprain/bruise of left lower leg.

Pinched right wrist between jackleg and lift truck rail. Bruised right wrist.

Employee was pulling a jackleg drill and lost control, when he tried to regain control he pulled a muscle in his chest.

Ruff haulage road.

Employee was installing split sets and hog panels for ground support. Driving the bolt to back small piece of rock fell out from between hog panel and back.

Injured was bolting with jackleg, when he went to move it he felt a pull in his groin. The injury was reported, but he said he was fine and kept working. On 12/17/2007 he saw his family physician and surgery was performed.

EE was in work area 1972-MP bolting the back. Started pinning screen up, when the screen hinged back and hit him in the mouth. Loss of 1 tooth and loosened others in the bottom jaw. EE was with a work partner.

Employee was bolting with a jackleg drill and had leaned a 10'drill steel against the rib. He hit the steel with a panel of screen knocking it over onto his left hand, causing bruising and swelling.

The miner was bolting from the deck of a scissor truck. While assisting another miner collar a hole, the second miner dropped the drill, which struck the injured miner in the lower right leg and calf area.

Miner was in the process of loading the face with a 3 bag ANFO pot, when the pot goes dry the ANFO loading hose gets an instant burst of high pressure air, which caused the end of the plastic loading hose to whip out of the hole and strike the miner above the right eye, lacerating the right eye brow and the bridge of the nose.

Injured worker asked SLZ employee to wash his boots by pressure washer. SLZ employee did not realize the washer was set too high and hot. Sprayed injured worker's boot with foot in it caused injury.

INJ WAS TIGHTENING BOLTS ON A CLAMP WITH AN IMPACT WRENCH WHEN THE WRENCH SLIPPED OFF BOLT STRIKING INJ'S LEFT FOREARM. SAW PHYSICIAN 2/7/05