Buscar en el registro

Changing dozer bolts

Laceration to leg.

Dozer hit a boulder & tipped over.

While said operator was breaking granite into smaller pieces with a hydraulic breaker, a shard of granite went through the excavator cab safety glass and struck operator in the forehead. He remained conscious and alert. Was brought to local clinic where they sutured the contusion. Doctor said he could return to work next day

EE was welding, slag got on EE's boot, resulting in a burn to his top left foot. Went to the doctor and medication was prescribed.

Backed off an embankment resulting in jolt to neck. Employee has no lost/restricted time but went to the chiropractor for adjustments.

Hit a big rock with dozer. Neck went out of place Did not seek medical treatment until 6/19/09.

Was grinding metal and piece of metal went in nose. Did not seek medical treatment until 3/12/09 due to irritation.

Employee was grinding iron; small sliver of steel got under safety glasses and lodged into right eye.

Was backing dozer and hit boulder he was looking back at that time and his head snapped back.

Repairing piece of equipment & a silver of grinding debris flew in his eye.

EMPLOYEE WALKED INTO AREA WHERE MECHANICS WERE RUNNING A GRINGER, HE TURNED AROUND TO GET SAFETY GLASSES AND GOT A PIECE OF SLAG IN HIS RIGHT EYE.

Employees were lifting electrical box on crusher. Lift chain unhooked over balancing box, fell and struck employee's right lower leg, fracturing it.

EE WAS GRINDING WITHOUT FACE SHIELD. ONLY SAFETY GLASSES WERE WORN. EE HAD PARTICLE OF METAL IN HIS EYE. LEFT EYE.

WHILE OPERATING THE DOZER THE OPERATOR HIT A RAVENE AND BIG BOULD. THIS BROUGHT THE MACHINE TO ANY ABRUPT HALT. THERE WAS TALL VEGATABTION GROWTH IN THE AREA.

EE WAS AIR ARCING. HE MUST HAVE ALLOWED HIS ARC TO STRIKE BEFORE HE PUT HIS HELMET INTO PROPER POSITION.

USING TORCH UNDER A CONVEYOR AND A PIECE OF SLAGGOT INTO EYE.

EMPLOYEE WAS AT TEMPTING TO FREE A JAW CRUSHER JAW WITH A BAR THE BAR WAS GRABBED BY THE ROCK & JAW RESULTING IN THE TOP OF THE BAR HITTING HIM IN THE UPPER STOMACH AREA

EE WAS WELDING ON EQUIPMENT AND ELSE HOLDING PLTES FOR OTHER WELDERS TO TACK IN PLACE HE RECEIVED FLASH BURN TO HIS EYES.

WHILE BACKING THE DOZER THE DOZER DROPPED INTO A 2' DRAINAGE DITCH BUILT IN THE PIT TO DETOUR HIGH WATER TABLE.

THE CHAIN ON THE ROD CHANGER WAS NOT PROPERLY LINED UP AND ALLOWED THE ROD TO COME OUT AND FALL.

EMPLOYEE WAS BUFFING ACRUSHER LINE RWITH A ELECTRIC GRINDER AND WRIE BRUSH. SHIFT TAIL CAME OUT OF PANTS AND GOT CAUGHT IN GRINDER CAUSING HIM TO FALL.

EE WAS USING A CUTTING TORCH HE NEEDED MORE HOSE HE PULLED ON THE HOSE AND IT CAME APART AT A SPLICE AND BURNED BACK INTO THE HOSE.

EMPL WELDING INSIDE OF FEEDER AND RECD BURNS TO ELBOW FROM ARC OF FLASH.

EMPLOYEE WAS BARRING OUT SPOKANE CRUSHER TO UNPLUG IT. BAR WAS CAUGHT IN THE ROTATING TABLE AND STRUCK HIS HAND.

GRINDING UNDER WINDY CONDITIONS AND A STEEL GRAGMENT ENTERED HIS EYE.

GRIDING AN METAL WITH A PORTABLE GRINDER AND A FRAGMENT GOT INTO HIS EYE.

EMPLOYEE WAS UNPLUGGED A CONE CRUSHER WITHA METAL BAR. BAR CAME IN CONTACT WITH MOVING MACHINE PART WHIPPED IT OUT OF HIS HAND THROWING IT UP AGAINST HIS OPPOSITE HAND.

INSTALLING CUTTING EDGE ON LOADER BUCKET. WHILE HOLDING THE BOLT WITH HIS HAND, THE IMPACT SPUN THE BOLT AND CUT THRU HIS GLOVE INTO HIS FINGER.

EMPLOYEE WAS BACKFILLING A P-MATERIAL WAS PODERY DRY WITH 12-18" ROCK MIXED IN. POWDER WAS 8-10" DEEP & CAT BACKED OVER A PARTIBLY COVER ROCK & JOLTED THE OPERATOR.

EMPLOYEE WAS ASSISTING A MAINTANCE PERSON HOLDING A PLATE ON THE DOZER BLADE WHICH NEEDED TO BE WELDED IN PLACE. THE DOZER BLADE WAS SHINNY AND HE RESERVED REFLECTIVE GLARE TO GIVE HIS EYES FL ASH BURN.

EMPLOYEE PUT HIS HAND BEHIND A GUARD TO TRY AND LOCATE A OIL LEAK WHILE THE EQUIPMENT WAS RUNNING. HIS HAND HIT THE FLY WHEEL.

CUTTING WITH THE TORCH-FAILED TO WEAR FACE PROTECTION.

WELDING A STAND UNDER A CONVEYOR HOT SPARKS SLID DOWN HIS SHIRT SLEEVE AND BURNED HIS WRIST OR FOREARM.

EMPLOYEE WENT UP TO INSEPECT JAW CRUAHER A SMALL CHIP OF ROCK FLEW OUT HITTING HIS SAFTEY GLASSES BREAKING THE GLASS.

GRINDING ON METAL HAD SAFTEY GLASSES ON ONLY SHOULD HAVE ALSO HAD A FACE SHEILD.

EMPLOYEE WAS REMOVING A CUTTING EDGE FROM THE BUCKET WHEN THE LAST BOLT WAS CUT OFF THE IRON FELL ON H IS FOOT

WHILE DRILLING ON THE DRILL PRESS, EMPLOYEE FAILED TO SECURE THE DRILL VISE ON THEDRILL TABLE. PIECE BEING DRILLED SPUN WITH THE ACTION OF THE DRILL CUTTING HIS ARM.

USING A BAR TO CLEAN A JAMMED CONE CRUSHER WHEN A LARGE ROCK CAME OFF OF A CONVEYOR HIT THE BAR FORCING IT INTO HIS FACE AREA BREAKING HIS GLASSES AND RESULTING IN A LACERATION ON HIS CHEEK.

WELDING AT NIGHT AND RECEIVED WELDING FLASH.

WELDING ON A LOADER BUCKET-APIECE OF SLAG BLEW INTO BEHIND HELMET AND LODGED IN HIS EY. E.

DOZING IN PIT A3D SUDDNELY FETL A SHARP PAIN IN NECK AND ARM

STANDING ON THE3RAIL OF SHAKER TO FIT A LIGHT. A ROCK CAME OFF OF THE FEEDER & BOUNCED ONTO THE EDGE OF SHAKER LIP & HIT HIS FOOT. EE WAS WEARING SAFETY SHOES.

EMPLOYEE WAS GU3DING CRANE OPERATOR IN POSITIONING A FAN ASSEMBLY ON THE GROUND. THE JAW SLIDE SIDE WORK CATCHING & TRAPPING THEEMPLOYEE BETWEEN THE JAW AND A LOADER BUCKET WHICH WAS PARKED NE ARBY. 3

DOZER OPERATOR 2AS BEEN IN SERIES OF GRAVEL PITS WITH EXCEPTIONALLY ROUGH,ROCKY BOTTOM CAUSING E UNEVEN SURFACE WHICH IN TURN LENDS TO ROUGH JARRING RIDE.

EMPLOYEE WAS SHOVELING SIFTED MATERIAL FROM UNDER A PRE SCREENER-LOST HIS HARD HAT AND A SMALL ROCK FLEW OFF THE PRE SCREENER AND STRRUCK THE EMPLOYEE ON THE HEAD.

EMPLOYEE WAS DRILLING HOLES IN LLIMESTONE AND PUT HIS HAND ON DRILL STEM WHILE DRILLING HE WAS ABOUT TO KICK SOME DIRT AWAY FROM THE HOLE.

USING A GRINDER AND A PIECE OF METAL ENTERED INTO EYE

REPAIRING BROKE SHOES ON TROLLER-ANOTHER WORKER WAS USING A TORCH 10 FT AWAY & A SMALL OBJECT GOT INTO HIS RIGHT EYE.

METAL GRINDING LODGED IN EYE.