Buscar en el registro

While welding underneath a test stand, spal fell down and landed on employee's leg. He was unable to move in time to get it off. On 1/17/08 employee noticed his leg had become infected because it was a large red area around the burn. Employee went to the hospital and was diagnosed with a staph infection. Employee received antibiotics.

Employee was using a Porta-Power tool which slipped from it's location and struck him in the nose and face.

Employee's hand became pinched between a manlift basket and a crusher flywheel.

A shaft that secures a wheel on a tire balancing machine broke. The EE's finger was caught between the machine and the wheel, causing a laceration and a fracture to the tip of his left ring finger. The machine was tagged out and will be replaced with a larger capacity model. Training is being provided to prevent over-torqueing of shaft.

Employee was "striking an arc" with one hand and holding the welding helmet with the other hand. He did not properly use the welding helmet and received "welder's flash." Employee is being trained on proper welding techniques to prevent any further injuries.

EE was using an electric, hand held drill to drill a hole in a broken bolt to get it out. The drill bit caught and twisted the drill and the ee's arm.

CLEANING OUT A PIECE OF EQUIPMENT (VSI) WITH AN AIR CHISEL. A PIECE OF DIRT OR ROCK GOT INTO HIS RIGHT EYE.

EMPLOYEE WAS OPERATING OVERHEAD JIB HOIST TO MOVE A HYDRAULIC CYLINDER. AS THE CYLINDER WAS BEING LOWERED IT BEGAN TO SWING AROUND. EE TRIED TO GRAB AHOLD OF IT AND IN DOING SO HE PULLED OR TW ISTED HIS LEFT SHOULDER.

WAS REBUILDING A PTO AND SHAFT WHICH WAS ONT HE FLOOR, WHEN HE WAS ATTEMPTING TO USE A HOIST TO LIFT THE SHAFT A STRAP CAUGHT ON THE SHAFT NUT CAUSING IT TIP OVER AND FALL OCROSSED HIS RIGHT F OOT.

WHILE USING CUTTING TORCH TO CUT A BOLT ON TOP OF A SCREEN SHAKER, A SPARK BLEW IN THE WIND AND ENTERED UNDER HIS SAFETY GLASSES/SHIELD AND WAS LODGE IN CORNER OF LEFT EYE CAUSING IRRITATION/S WELLING.

WHILE GRINDING ON A CONE TOP, A HOT SPARK CAME DOWN BETWEEN HIS SHEILD AND LANDED IN HIS EYE. THE PEICE OF METAL BURNED INTO EYE AND HE COULDN'T RELIEVE THE PAIN.

DRILLER AND HELPER WERE CONNECTING STEEL TO POWER HEAD ON DRILL WHEN IT CAUGHT TURNED AND CABLE THAT WAS ATTTACHED TO IT HIT BOTH MEN.

DRILLER AND HELPER WERE CONNECTING STEEL TO POWER HEAD ON DRILL WHEN IT CAUGHT, TURNED AND CABLE THAT WAS ATTACHED TO IT HIT BOTH MEN.

EE WAS USING A GRINDER TO GRIND THE NOSE BEARINGAREA OF A HAUL TRUCK. GRINDER SLIPPED OUT OF HAND CUTTING INDEX FINGER.

EE WAS GRINDING BURRS OFF A SCREWDRIVER USING A PEDESTAL GRINDER. SCREWDRIVER BECAME WEDGED BETWEEN TOOL REST AND GRINDING WHEEL CAUSING TOOL REST TO BREAK AND COMING IN CONTACT WITH LEFT HAND CAUSING LACERATIONS.

HE WAS GRINDING WHEN PIECE OF STEEL EMBEDDED IN RIGHT EYE.

GETTING READY TO HELP CHANGE SCREEN, REACHED IN TO CATCH BOLT BEFORE MACHINE CAME TO STOP FINGERGOT SMASHED BY THE BODY SPRING

GRINDING STEEL SPARK BEHIND ENTER R EYE

HE WAS HELPING TO INSTALL A ROLL CAGE ONTO A 988B LOADER WHEN THE CRANE OPERATOR PREMATURELY LOWERED THE CAGE, RESULTING IN IT RESTING ON HIS HOSHOULDER.

HE WAS WELDING WHEN A PIECE OF SLAG FLEW INTO HIS LEFT EYE.ABRASION OF LEFT EYE.

HE WAS DRILLING PIECE OF ANGLE IRON WHEN IT FELL & STRUCK HIM ON LEFT KNEE.

WELDING WHEN FOREIGN OBJECT FLEW INTO EYE.

EMP WAS GRINDIN1 STEEL ON A NEW HOPPER. A PIECE OF SLAG FLEW INTO HIS RT EYE. SLAG WAS REMOVED

EMPLOYEE WAS WE5DING THE IMPACTOR. A PIECE OF SLAG FLEW OFF AND ENTERED HIS RIGHT EYE, WHICH WAS IMBEDDED IN EYE.

EMPLOYEE WAS DI1GING ROCK OUT OF IMPACTOR A ROCK FLEW UP & HIT CHIN CAUSING LACERATION REQUIRFING SUTURES

EMPLOYEE WAS WO9KING WITH STEEL A PIECE OF STEEL FROM GRINDER FLEW INTO RT EYE FOREIGN BODY REMOVED

EMPL GRINDING HOLES ON 988-B BUCKET.WHILE GRINDING ,RUST PARTICLES WENT INTO RIGHT EYE.FOREIGN BODY RESIDUAL RUST EMBEDDED SUPERFICIAL CORNEA.

EMPLOYEE WAS REPAIRING AND RESETTING VIBRATORY SCREEN. WHILE RESETTING THE VIBRATORY SCREEN, THE SCREEN BECAME CAUGHT ON SUPPORTING STRUCTURE, CAUSING A SLIGHT SWINGING MOTION, WHICH CAUSED EM PLOYEE TO BECOME CAUGHT BETWEEN THE SCREEN AND STRUCTURE. PINCHED AND BRUISED NERVES AND MUSCLES IN BOTH LEGS, MAINLY KNEES AND THIGHS.

EE WAS FABRICATING METAL IN CRUSHING PLANT WITH A CUTTING TORCH & WELDING MACHINE. SLAG POPPED OFF OF METAL HITTING HIM IN THE EYE. EE WAS EARIN'%%'%*%*' WEARING SAFETY GLASSES.

EMPLOYEE WAS GRINDING ON EUCLID BED A FOREIGN BODY WENT BEHIND PROTECTIVE GLASSES AND ENTERED LEFT EYE