Buscar en el registro

Fell, hard hat came off and rock fell from the overhead chute and hit me in the head.

Welding in S-3 discharge chute. Lowered piece of 16" x 2' patch down to the tacked into place. Was then welding in chute between EE's legs and sparks caught pant leg on fire.

An employee working for a contractor was using a 6" inch DeWalt angle grinder on the corner of a new cold fee bin to prepare to weld. When he began to grind the surface in a vertical fashion, the grinder "kicked" back at the employee striking him above his right eye and on the right side of his nose.

EMPLOYEE RECEIVED FLASH BURNS TO HIS EYES. HE WAS HELPING A FABRICATOR WITH SOME REPAIRS ON A CHUTE, WHEN THE SECONDARY FLASHES OCCURED FROM THE WELDING PROCESS. THE INJURY WAS NOT EVIDENT UNTIL THE FOLLOWING DAY. HE THE RECEIVED EYE DROPS & CREAM AT THE HOSPITAL. HE RETURNED BACK TO WORK WITH NO RESTRICTIONS 3 DAYS LATER. 3/26/04

RUST INSIDE HELMET OR BLOWN UP INTO HELMET.

TWO EMPLOYEES WERE REPLACING THE WING PULLEY ON THE BERM STACKER. BOTH ENDS WERE SUPPORTED WITH A CHAIN HOIST. EE RAISED HIS END AND THE HOIST CAME UNHOOKED SMASHING HIS HAND BETWEEN THE PULLE Y SHAFT AND THE CONVEYOR FRAME.

EMPLOYEE WAS USING AN OVERHEAD HOIST TO MOVE A STEEL PLATE. HE HOOKED HOIST DIRECTLY TO PLATE, THE HOOK SLIPPED AND THE PLATE STRUCK HIS ELBOW CUTTING IT.

EE WAS WELDING ON A PIPE AND HE CHIPPED THE WELD AND GOT A PIECE OF SLAG IN HIS EYE. WASH EYE OUT WITH BUFFERED USUHING SOLUTION. EE THAN WENT TO HOPSITAL TO GET CHECK OUT BETTER. AFTER TAIL T O EE ON 1-6-99 WITH EE WE FOND OUT THAT HE HAD TO SEE EYE DR. THREE TIME TO CHECK FOR INFLICTION. THIS IS WHY THIS REPORT IN LATE.

EE WAS CUTTING ANGLE IRON WITH A TORCK & A SPARK FELL INSIDE OF HIS GLOVE CAUSING IT TO CATCH FIRE.

OVERSIZED CHUTE HAD PLUGGED. MEN DECIDED TO CUT INSPECTION HOLE IN CHUTE TO SEE WHAT WAS NEEDED TO UNPLUG IT. AFTER MOST OF THE HOLE WAS CUT THE PRESSURE OF ROCK AGAINST THE STEEL BROKE LOOSE & STEEL FELL ON LEG CUTTING KNEE. TOOK 17 STITCHES TO REPAIR KNEE.

CUTTING WORN PUSH PLATE OFF OF DOZER. STEEL WAS BOUND UP WHEN CUT LOOSE STEEL SPRUNG OUTWARD STRIKING IN CHIN.

DRILL OPERATOR WAS CHANGING SHAFT INTO HIS DRILL AS. HE LOWERED DRILL DRIVE MOTOR AND SHAFT AT A SLOW ROTATION. HE WAS GUIDING THE SHAFT WITH LEFT HAND, OPERATING CONTALK WITHHIS RIGHT HAND. A S HE SHAFT ENTERED THREADED END OF STATIONARY SHAFT OPERATOR PINCHED MIDDLE FINGER AND RING FINGER IN THREADS. LACERATION/PINCHED FLESH

SLIPPED ON MUD. PUT HAND ON WELD.

AFTER HE GOT DONE DRILLING A HOLE HE LET HIS JACKS DOWN AND THE DRILL WENT OVER THE WALL.

DRILLER AND CONTRACT BLASTER WERE FINISHING DRILLING A SHOT. WHILE STANDING BEHIND THE DRILL A SECTION OF THE HIGHWALL SLID AND EMPLOYEES JUMPED OVER TO SOLID GROUND.

EE WAS PRYING BELT SCRAPER UP SO OTHER COULD CUT A NOTCH IN SCRAPER HANGER WHEN OTHER WITH LIT TORCH IN ONE HAND ATTEMPTED TO HELP HIM PRY IT UP MORE WITH HIS OTHER HAND AND THE TORCH CAME IN CONTACT WITH EE LEG BURNING HIM.

CUTTING STEEL WITH A TORCH.TORCH TURNED WHEN IT WENT TO GET ANOTHER PIECE OF STEEL TO CUT.TORCH TIP TURNED AND WENT OVER TOP OF LEFT HAND.

EMPLOYEE WELDING RAIL ON NEW CONVEYOR - LEANED OVER RAIL THAT HAD JUST BEEN WELDED TO WELD ANOTHER AREA AND ARM TOUCHED HOT AREA AND BURNED IT. THE BURN WAS 2ND DEGREE BURN ABOUT THE SIZE OF A GOLF BALL ON LEFT UPPER ARM.

SHEAVE ON 250 HP MOTOR WAS FROZE ON AND HAD TO BE SPLIT BY CUTTING IT WITH AN AIR ARC. A WHEEL/PULLEY PULLER WAS THEN USED. WHEN THE SHEAVE FINALLY BROKE LOOSE, IT CAME WITH SUCH FORCE STRIKIN G EE IN HEAD. EE REQUIRED 5 STITCHES ABOVE HIS LEFT EYE.

EMPLOYEE WAS ASSISTING WELDERS REPAIR JAW CRUSHER FEEDER AND RECEIVED WELDERS FLASH TO HIS RIGHT EYE.

TURNED ON IMPACT WRENCH AND SHORT END OF HANDLE WENT INTO I.NAME HAND.

MUD ON DRILL STEEL LIFTED STEEL COLLAR ABOUT 3 FEET, COLLAR CAME LOOSE FALLING ON FINGER AS DRILLER WAS TRYING TO LINE UP DRILL STEEL. CUT DFINGER, REQURING STICHES.

WHILE RAISING A LARGE STONE WITH A ROCK HOOK, THAT WAS HUNG ON A OVERHEAD ELECTRIC HOIST, THE 5/8" STEEL CABLE BROKE AT THE TOP OF THE EYE. THE CABLE APPEARED TO HAVE SEVERAL BROKEN STRANDS O F WIRE AT THE TOP OF THE EYE. THE WEIGHT OF THE HOOK AND MAYBE THE ROCK ALSO PULLED HIS LEFT HAND INTO THE HANDRAIL WHERE IT WAS PINCHED BY THE HANDLE OF THE HOOK. PINCHING THREE FINGERS.

HAND GRINDER JU4PED OFF OF STEEBEAM & CUT LEFT THIGH (10 STITCHES).

TRYING TO DISLO8GE STOVE , STUCK IN CRUSHER ABRASION TO FOREHEAD.

GRINDING IN SHO1 WITH DIE GRINDER.MAKING REPAIRES ON FEED PLATE WHEN SPECK OF METAL GOT BEHIND SAFETY GLASSES AND LODGED IN EYE.

LAYING GRINDER 8OWN, ACCIDENTALLY KNICKED LEFT FOREARM.

OUR MAN WAS WELDING WITH BUILDUP-ROD ON OUR ROLL CRUSHER & RECEIVED FLASH BURN ON HIS FOREARMS & STOMACH