Buscar en el registro

Employee was at primary crusher for plant 17 checking for leaks on a skid steer when a rock came out of the crusher causing a small laceration above their left eye.

Miner was inside Stedman crusher preparing to weld on reel. As they stood up, they placed a foot on the reel, dislodging wedge and rotating reel upward catching their leg and pushing it up against the apron.

Miner was torching on old storage bin and heard a pop, fell to ground and injured right knee.

Employee fell down steps trying to get feeder shut off to stop overloading conveyor belt.

While remotely operating auto welder in primary crusher, miner experienced arc flash burn to left eye due to reflection.

Cutting bearing off shaft, grinder kicked back and hit left hand cutting it open. Required stitches to close.

Employee was drilling a hole in a steel pipe when the drill bit caught and caused ee to lose control of the drill. The drill rotated out of ee hand and struck ee on the face, lacerating lip. Laceration needed stitches to close.

A malfunction in a pneumatic grease gun caused grease to spray onto his face and into his eyes, causing irritation to both eyes. This incident is reportable because the employee received prescription eye drops to use in his eyes.

Employee was drilling a 1/2 inch hole in a conveyor frame. The drill "caught" as it exited the steel and the torque from the drill twisted his right hand. Injury is fractures of F-3 & F-4.

Was trimming weeds when something flew into his eye. Foreign object was imbedded.

Employee struck a chipping hammer with another hammer, causing a chip to break off, striking him in the knee. Resulting laceration required stitches to close.

Two employees were using an excavator to lift a dump truck bed from the truck body. One employee was in the bed, hooking up the lifting chains when the operator accidently moved the bucket striking the first employee.

Employee was cutting a piece of HDPE with a circular saw. He reached under the HDPE to see how close to the sawhorse he was with the saw and his finger came in contact with the rotating saw blade.

The employee was welding inside the primary crusher when he got a piece of welding slag in his eye. Employee did not seek medical treatment until 10/17. He was off work 10/18 & 19.

CUTTING STEEL WITH TORCH. BLOW BACK SHOWERED FACE WITH SLAG AND A PIECE GOT INTO HIS EYE.

Felt pain in low back while operating an electric jackhammer.

EMPLOYEE WAS LIFTING A BEARING OFF THE SCREEN SHAFT USING A CRANE. THE BEARING SWUNG UNEXPECTEDLY, PINCHING HIS RIGHT PINKY FINGER BETWEEN THE BEARING AND THE ADJACENT SHAFT.

GOT PIECE OF DIRT IN EYE WHILE RUNNING ROCKBREAKER.

RECEIVED "FLASH BURN" OF BOTH EYES WHILE WELDING WITH ANOTHER EMPLOYEE.

ROCK CAME OUT OF CRUSHER AND HIT MINER IN MOUTH. MINER WAS USING ROCK BREAKER TO DRAG STONE INTO CRUSHER WHEN ROCK CAME OUT. CHIPPED THREE (3) TEETH.

BURNED LEFT INDEX FINGER WHILE USING OXYGEN/ACTYLENE CUTTING TORCH TO CUT OFF BOLTS. TORCH REPORTEDLY BACKFIRED AND CAUGHT GLOVE ON FIRE.

WAS CUTTING OVERHEAD BOLT, SLAG FELL INTO RIGHT EYE. EE RECEIVED MORE THAN ONE DOSE OF PRESCRIPTION EYE DROPS.

HE WAS CLEANING UP WITH CACUM TRUCK. THE HOSE BECAME PLUGGED. WHEN IT OPENED, IT RECOILED & STRUCK HIS NOSE.

CUTTING PIEVE OF STEEL WHEN SLAG FLEW IN EYE. PRESCRIPTION EYEGLASSES WITHOUT SIDE SHIELDS AND CUTTING GOGGLES WERE BEING WORN.

EE WAS LAYING ON FLOOR CUTTING A PIN OUT WITH A TORCH AND PIECE OF HOT SLAG FELL IN HIS LEFT EAR CAUSING A SMALL BURN WHICH BECAME INFECTED. EE DID NOT SEEK MEDICAL ATTENTION UNTIL 11-13-99.

WHILE CHANGING BAGS IN BACHOUSE, TOP OF CAGE HITROOF & KNOCKED DOWN DUST THAT FELL BETWEEN HARD HAT & SAFETY GLASSES ON FACE & DUST GOT IN RIGHTEYE.

EMPLOYEE WAS TIGHTENING BOLT WITH AN IMPACT WRENCH AND A FOREIGN BODY FLEW INTO HIS EYE. MEDICALTREATMENT INCLUDED EYE DROPS ON 05/04/99. EMPLOYEE REPORTED ACCIDENT ON 7000-1 FORM. QUIT ON 06/ 24/99. FOUND IN SELF AUDIT ON 06/30/99.

EMPLOYEE GOT DUST IN HIS LEFT EYE. TREATMENT INCLUDED EYEDROPS.

USING AUTOMATIC WELDER IN CRUSHER, ENTERED CRUSHER WHILE WELDER STILL ON CAUSING FLASH BURNS TO BOTH EYES. EE WAS USING PROTECTIVE GOGGLES AT THE TIME. DID NOT REALIZE INJURY TILL END OF SHIFT , WENT TO HOSPITAL. MEDICAL CARE INCLUDED DROPS FOR THE EYES.

BAND SAW WAS SHUT OFF, BLADE SLOWING DOWN. EE WAS NOT PAYING ATTENTION HAND CAME IN CONTACT WITHBLADE LACERATING IT REQUIRING STITCHES.

WHILE TACK WELDING SHIELD TOGETHER SUFFERED A FLASH BURN TO EYES TO FACE. TREATMENT WAS FOR INFECTION.

CLEANING DIRT OUT OF HOPPER WITH A HAMMER GUN. SMASHED LEFT RING FINGER BETWEEN HAMMER AND HOPPER. MEDICAL INTERVENTION INCLUDED STITCHES.

GRINDING INSIDE CHUTE WITH WIRE WHEEL PIECE OF WIRE CAME OUT OF WHEEL INTO RIGHT EYE. EE WAS WEARING PERSONAL PROTECTIVE EQUIPMENT.

WAS UNDER CALCIMATIC #2 CUTTING OUT OLD TRACK, GOT CUTTING SLAG IN LEFT EAR.

CUTTING OUT OLD SCREEN CLOTH, POPPING RUST AND SLAG BURNED LEFT FOREARM. EMP DID NOT SEEK MEDICAL ATTENTION UNTIL 8-1-96. DID NOT REPORT MEDICALATTENTION UNTIL 8-13-96.

CUTTING STUD OUT OF NO.1 HYDRATOR ARM ON BOTTOM DECK. SHUT OFF TORCH AND LAYED IT DOWN. WHEN PICKED UP AGAIN DID NOT GRAB BY HANDLE. GUN FLASHED IN HAND CAUSING SECOND DEGREE BURNS TO LEFT HAN D.

HE WAS SETTING BRICK WITH A RAMMING GUN AND A 2 X 4 WHEN HE HIT HIS RIGHT THUMB WITH THE RAMMING GUN CAUSING A LACERATION.

CLAIMANT WAS AT D.O. WEARING SAFETY GLASSES, SUPERVISING AT DISCHARGE CHUTE, GOT DUST IN HIS RT EYE. CLAIMANT DID NOT REPORT ACCIDENT, NOR SEEK MEDICAL ATTENTION UNTIL 2-6-95. AT HOSPITAL DR. WAS UNSUCCESSFUL AT FLUSHING EYE. CLAIMANT WAS DISCHARGED WITH A PRESCRIPTION FOR ARTIFICIAL TEARS.

WHILE CRAWLING TO NEXT POINT TORCH PASSED OVER WRIST CAUSING 2ND DEGREE BURN.

WHILE WAITING FOR MAINTENANCE PARTNER TO FINISH GRINDING PIECE OF METAL FLEW IN RT EYE

DOING MAINTENANCE ON LIME KILM UNDER HOT CONDITIONS, LIME FELL ON EE CAUSING CHEMICAL BURNS ON NECK.

FLASH BURNED BOTH EYES WHILE WELDING. [NOT DETERMINED AS AN ACCIDENT UNTIL 12/20/93]

DRILLING HOLE TO FIX DOOR, BIT WENT THROUGH AND HAND CAUGHT SHARP METAL LACERATING LEFT HAND.

CHECKING FOR LEAK THAT HAD CUASED AN ELECTRICAL MALFUNCTION, FEEDER WAS TURNED ON BY OEPRATOR FRACTURING RING FINGER, RIGHT HAND.

WHILE GRINDIG WELDS, GRINDER GOT AWAY CAUSING ABRASIONS TO LEFT SHOULDER AND FOREARM.

EMPLOYEE WAS CLEANING UP AT A CRUSHER WHEN A PIECE OF HANDRAIL BROKE FROM VIBRATION AND FELL ON HIS FOREARM.

AS EE WAS SITTING ON FEEDER AND AIR HAMMERING STONE LOOSE ANOTHER EMPLOYEE WAS UNDER THE FEEDER CUTTING BOLTS WITH A TORCH AND CUT A BOLT WHERE EE WAS SITTING CAUSING A BURN INJURY TO THE LEFT BUTTOCK.

EMPLOYEE WAS OPERATING A PNEUMATIC HAMMER REMOVING BRICK FROM A SHAFT KILN WHEN THE CHISEL SLIPPED OFF THE BRICK CAUSING THE HAMMER TO DROP & PINCH HIS PENIS BETWEEN THE HAMMER & STEEL PLATE T HE EMPLOYEE WAS SITTING ON

EMPLOYEE WAS NOTCHING SMALL PIECES OF ANGLE IRON WITH A PUNCH PRESS WHEN HE PINCHED HIS FINGER BETWEEN THE MACHINE AND THE ANGLE IRON.,

WHILE CUTTING STEEL FROM END OF LOADER BUCKE THTE STEEL TWISTED AS THE FINAL CUT WAS MADE, STRIKING EMPLOYEE'S LEFT ANKLE.