Buscar en el registro

while leaning forward EE felt a pop in EE's lower left leg. was medically evaluated and was diagnosis as a strain.

While welding on a guard the setting on the Welding Helmet must not have been set correctly because later that night EE's eyes became irritated and EE sought medical attention for Flash Burns.

EE was adjusting the Gamma machine and requested that teammate start the machine and EE's right hand was still in the machine. EE's right hand became entangled between the two railings.

on 2/20/21, employee was replacing a motor on the South Regular Mill. While the motor was on the ground with little tension on the motor, The motor was in a bind leaning on the ladder and it broke free as it was being hoisted up. With the motor still attached to the hoist, it shifted and struck the top of employee's foot.

While unstopping bag houses got finger too close to revolving gate of rotary valve and made contact with the middle finger causing a cut to the tip of the index finger.

Employee was using a high pressure grease gun to grease a bearing. The high pressure blew the grease gun off the bearing and knocked employees safety glasses up resulting in grease into the employees left eye. Employee received first aid (washing out as instructed by MSDS) and then was treated and released from the ER for an minor abrasion.

Operator strained his back after being pinned between a bulk bag and an I beam.

Operator's thumb was lacerated and fractured. When caught between sealer jaw of bagging machine.

LEFT HAND & WRIST CAUGHT BETWEEN HEAT BARS & FORM & FILL MACHINE CAUSING A BRUISE ON HAND & WRIST. MACHINE WAS NOT LOCKED OUT.

4TH & 5TH FINGERS OF LEFT HAND WERE CAUGHT IN A PULLEY AS OPERATOR WAS TRYING TO HOIST AN ELECTRICAL MOTOR UP TO A PLATFORM.

OPERATOR HAD ADJUSTED A RIBBON SPOOL ON SEWLINGMACHINE. AS OPERATOR STARTED USING SEWING MACHINE RIBBON SPOOL CAME LOOSE & STRUCK OPERATOR ON SHOULDER. BRUISED SHOULDER

EE WAS MOWING THE GRASS WITH A TRACTOR. TRACTOR WHEEL HIT A RUT IN THE FIELD, JARRING HIS BACK.

OPERATOR WAS USING A TORCH TO CUT DIPPERS FROM ELEV. BELT. OPERATOR WAS USING CHANNEL LOCK PLIERS TO PUSH BOLTS. OPERATOR'S HAND SLIPPED OFF PLIERS CAUSING HAND TO TOUCH HOT METAL

OPERATOR WAS STACKING 50 LB BAGS. A BAG CAME OFF THE CHUTE AND FELL TO THE PLATFORM. OPERATOR WAS IN THE PROCESS OF LIFTING BAG FROM PLATFORM WHEN ANOTHER BAG CAME OFF THE CHUTE AND STRUCK THE BAG BEING LIFTED. THIS RESULTED IN A MUSCLE STRAIN IN THE OPERATORS BACK.

OPERATOR WAS ATTEMPTING TO LIFT A BAG CHAIN ON VALVE PACK MACHINE. AS HE LEANED FORWARD, HIS SHOULDER TRIPPED THE LEVER, CONTROLLING THE CHAIN. THE CHAIN CLAMPED DOWN ON HIS THUMB.

OPERATOR WAS PUSHING CLAY DOWN AN INCLINE TO A PILE BELOW WITH A BULLDOZER. HE PUSHED THE TOP OF THE PILE DOWN IN ORDER TO GOT TO LUNCH. AFTER LUNCH HE BACKED THE BULLDOZER OVER THE PILE. WHEN HE BACKED OVER THE TOP OF THE PILE THE BULLDOZER SET DOWN HARD AGAINST THE INCLINE BANK WHERE HE HAD BEEN PUSHING CLAY. THIS JARRED OPERATORS BODY CAUSING INJURY TO RT HIP & LEG.

OPERATOR WAS ADJUSTING ON A GRINDING MILL WHEN THE ADJUSTMENT ROD POPPED OUT OF THE MILL ARM CATCHING HIS LEFT INDEX FINGER BETWEEN THE ADJUSTMENT ROD AND THE MILL ARM ABOVE THE BOTTOM ADJUSTM ENT ARM.

AIR PRESSURE HAD BEEN LIFTED ON THE PINCH AIR CYCLINDER OF A VALVE-PACK MACHINE.ONE OPERATOR REACHED OVER THE MACHINE TO HELP INJURED AND TRIPPED THE SWITCH TO THE PINCH AIR CYCLINDER TRAPPING HIS LEFT HAND.HE HAS BRUISED MUSCLES,TENDONS ANLIGAMENTS IN LEFT HAND.

I.NAME WAS GRINDING ON A PIECE OF ANGLE IRON WHEN A SMALL PIECE FLEW UP EITHER FROM THE GRINDER OR GRINDING TABLE AND HIT HIS RIGHT EYEBALL. DR. COULD FIND NO PIECE OF METAL OR DAMAGE TO THE E YEBALL. DR. SAID THERE IS A POSSIBILITY OF A SCRATCHED EYEBALL.

I.NAME WELDING,CHIP WENT INTO RIGHT EYE.CHIP WAS REMOVED BUT LEFT RUST RING IN EYE THAT HAD TO BE TREATED/

THE POWER ROLLER BED WAS STALLED WITH A PALLET, THE EMPLOYEE CLEANED THE PHOTO CELL CAUSING THE ROLLER BED TO ENERGIZE. THUS CATCHING THE EMPLOYEE'S WRIST BETWEEN THE PHOTE CELL AND THE PALLET .

EMPL CHANGING BAG REST ON VALVE BAGGER TO ACCOMAODATE 40 LB BAGS.PLACED RIGHT HAND UNDER BAG REST AND INADVERTENTLY STARTED MACHINE.BAG REST LOWERED MASHING EMPL HAND.BRUISED HAND.

EMPL HAD JUST FINISHED A WELDING JOB HE LIFTED HIS HOOD TO ANALYZE THE JOB AND A PIECE OF FLUX POPPED AND BURNED HIS EYE LID

THE EMPLOYEE WAS BUILDING A REBAR CAGE WHILE PERFORMING THIS TASK HE APPARENTLY EXPOSED HIMSELF TO REFLECTED WELDING RAYS

EMPLOYEE WAS HELPING TO ADJUST THE BAG CHAIR ON A VALVE PACK MACHINE WHEN THE CYLINDER RETRAXCTED CAUSING THE BAG CHAIR TO FALL ON H IS LEFT THUMB

THE EMPLOYEE WA8 CUTTING A COUPLING LOOSE FROM THE SHAFT OF A SLIDGE PUMP WITH A CUTTING TORCH POURING THE PROCESS OF CUTTING A METAL FLAKE FLEW INTO THE EMPLOYEES EYE.

THE EMPLOYEE WA8 HELPING TO REPAIR A MILL. HE WAS WATCHING ANOTHER EMPLOYEE WHO WAS CUTTING THE INJURED EMPLOYEE WAS WEARING PEPPER EYE PROTECTION AT THE TIME OF THE INJURY BUT A METAL FLAKE S TILL MANAGED TO3FALL INTO HIS LEFT EYE.

THE EE WAS INSPECTING THE ROLLERS ON THE TURN TABLE OF THE STRETCH WRAP MACHINE WHILE THE ROLLERS WERE ACTIVATED. A BURR ON ONE THE ROLLERS CAUGHT HIS GLOVE PULLING HIS LEFT HAND BETWEEN A L IVE ROLLER & A DEAD ONE.