Buscar en el registro

While trying to access the 2nd deck of a 3 deck vibratory screen, employee slipped on a wet surface and twisted their right knee.

While assisting the installation of a belt conveyor's new belting the pulling cable broke, resulting in the supporting chain hook swinging and hitting a maintenance man's right ankle, bruising the ankle.

Assisted welder by holding a metal liner in place while another employee was welding. The employee was wearing safety glasses, not a welding hood. Employee was diagnosed with Photokeratitis of both eyes and will miss a couple days of work.

The torch tip was plugged so employee tried to brush away slag build up with glove on and accidentally hit the trigger which burned EE's index finger with hot air.

Employee was cutting shaft with Band saw blade stuck when walked around to lift blade, shaft fell hit piece of metal on floor which flipped up causing facial laceration. Employee received sutures and returned to work

Cutting off bearing tried to clean torch tip by rubbing on hand torch lit up and burnt wrist

cutting off bearing hot slag fell on boot

Employee was welding a discharge tail box for C-12 conveyor and received flash burn. He was welding inside a tight area and was wearing all necessary safety equipment.

Ee was holding a liner for another ee in the plant in bin #7 and received a welder flash.

EE was installing Huck Bolts in the pan feeder with a huck bolt gun. He went to put the huck bolt in and the huck bolt gun turned and pinned his finger where he could not release the trigger, mashing his finger.

EE stated his partner was welding a patch, it slipped out of his hand and hit him in the mouth.

Employee was bent over using a grease gun when he felt a pop in his lower back.

EE WAS HELPING TO CLEAN OUT THE CHUTE TO THE IMPACT CRUSHER. HE WAS MOVING THE JACKHAMMER AND MASHED HIS LITTLE FINGER BETWEEN THE JACKHAMMER AND THE SIDE OF THE IMPACT CRUSHER.

EE WAS WELDING LINERS IN THE DREDGE HOPPER. HE GOT OFF OF WORK AT 4 P.M. BY 7 P.M. HE SAID HIS EYES WERE BOTHERING HIM AND HE WENT TO THE E.R. HE HAD WELDERS FLASH TO HIS EYES.

EE WAS NEXT TO THE STACKER TRACK, WHERE PLANT MAINTENANCE WAS MAKING REPAIRS, AND SOMETHING WENT INTO HIS EYE. (SLAG).

EE WAS HOISTING A BARREL OF OIL UP TO THE PLANT. EE SAID THAT HE THOUGHT HE HEARD A POP AND HE EITHER LET GO OF THE HOIST HANDLE OR HIS HANDS SLIPPED. THE HOIST HANDLE HIT HIM IN THE FACE.

EMPLOYEE WAS WELDING A PLATE OVER A CONTROL BOX FOR THE RINSE STATION, HE BURNT HIS ARM FROM THE FLASH.

HE WAS TRYIN GTO FREE THE FLOP GATE WITH A 36" PIPE WRENCH. SOMEHOW POWER CAME BACK ON AND MOVED THE GATE BACK. HIS GLOVE CAUGHT ON THE WRENCH AND PINNED HIS HAND BETWEEN THE WALL AND THE WR ENCH.

EE WAS CUTTING BOLTS OFF TO CHANGE TRA. A PIECE OF HOT SLAG FELL INTO HIS LEFT BOOT & BURNED HIS FOOT BEFORE HE COULD GET THE BOOT OFF

HE HAD A PIECE OF 3/8 STEEL LAYING IN THE BACK OF UNIT #215. HE WAS USING A CUTTING TORCH TO CUT A SECTION OF THE METAL. WHEN HE FINISHED THE CUT, THE METAL FELL ON TOP OF HIS LEFT FOOT BEHIND THE STEEL TOE OF HIS SHOE.

HE WAS SENT TO TURN OR REPLACE RUBBER IN M-2 RETURN WIPER. HE STARTED TO CUT BOLTS TO REMOVE RUBBER AND SLAG POPPED INTO HIS RIGHT EYE. HE WAS WEARING PRESCRIPTION GLASSES WITH SIDE SHIELDS BU T WAS NOT WEARING CUTTING GOGGLES.

HE WAS CUTTING ON ECCENTRIC BEARING ON K-3 SHAKER. A PIECE OF SLAG POPPED OVER HIS CUTTING GLASSES AND WENT INTO HIS LEFT EYE.

EMP WAS REPAIRING DRAG LINK ON CRANE WHEN HIS ARM CAME IN CONTACT WITH TORCH.

HE WAS CUTTING A BOLT TO REMOVE A ROLLER WITH A TORCH AND CAUGHT HIS PANT LEG ON FIRE BURNING HIS LEG.

HE AND EE WERE REMOVING WORN LINER FROM DISCHARHE. EE WAS CUTTING THE WELDS ON ANGLE IN CHUTE. EE HAD HIS BACK TURNED TO AVOID SPARKS. THE ANKLE CAME LOOSE AND HIT EE IN THE BACK OF THE RIG HT LEG.

HE WAS CUTTING LINERS FOR K-8A DISCHARGE CHUTS. A PIECE OF SLAG FROM THE METAL HE WAS CUTTING WITH A TORCH WENT INTO HSI LEFT EYE.

HE WAS WELDING WHEN A PIECE OF SLAG FELL ON HIS SHOE AND BURNED THRU. THE SLAG BURNT THE TOP OF HIS LEFT FOOT BEFORE HE COULD GET HIS SHOE OFF.

HE WAS SAWING TREE LIMBS ON THE RIVERBANK. HE STEPPED INTO A GROUND HOG HOLE AND THE SAW DROPPED DOWN AND CUT HIS RIGHT KNEE.

WHILE CUTTING OFF A SET OF TROUGHING ROLLS, A PORTION OF A HOT BOLT WENT DOWN INTO HIS BOOT AND BURNED HIS RIGHT FOOT.

EMPLOYEE WAS HELPING TO MOVE ENGINE WHEN HIS FOOT WAS CAUGHT UNDER SUPPORT LEG OF PORTABLE CRANE. HE WAS WEARING STEEL TOE SHOES.

HE WAS GRINDING THE WELD DOWN ON 38" X 10" SMOOTH FACE PULLEY. A PIECE OF METAL GOT INTO HIS EYE.

TRYING TO PULL OUT TRUCK THAT WAS STUCK IN WET AREA IN GRAVEL PIT...RAN WINCH CABLE TO CONVEYOR.STARTING TO WINCH TRUCK OUT HOOK ON CABLE SLIPPED OFF CONVEYOR TRUSS & FLEW & HIT EMPLOYEE ON WR IST BRUISING WRIST & ARM.

HE WAS HELPING ANTOHER EMPLOYEE PUT A HEAD LAGGING ON M-3. HE WS HOLDING THE LAGGING DOWN WHILE IT WAS BEING WELDED.

HE WAS CUTTING STRIPS OF PLYWOOD FOR DOOR HE REACHED OUT TO HOLD BOARD WITH LEFT HAND SO AS THE HAVE GOOF HOLD ON LAST 2 INCH CUT SAID SAW CAUGHT JUMPED CUTTING THREE FINGERS ON LEFT HAND FING ERS WERE CUT ON ANGLE.

HE WAS CHNAGING A TIRE ON UNIT #49.AS HE WAS TIGHTENING THE WHEEL WITH AN AIR IMPACT,A METAL SHAVING WENT INTO HIS RIGHT EYE.

GRINDING SLAG OFF METAL IT CAUGHT LG PC OF SLAG THROWIN G GRINDER IN L KNEE

INJURED WAS WELDING INSIDE OF FEED HOPPER HE REMOVED HIS HOOD AND AT THIS TIME A PIECE OF SLAG FLEW INTO HIS RIGHT EYE.

HIT A HOLE WHILE CUTTING GRASS ON FORK TRACTOR WITH BUSH HOG ON REAR. CAME DOWN ON GEAR SHIFT LEVER THAT IS BETWEEN HIS LEG.

EE WAS OPERATING THE PAN AND THE BACK END SLID OFF OF THE SPOIL PILE. WHEN HE WAS GETTING OFF OF THE PAN, HE TWISTED HIS LEFT WRIST.

HE WAS USING HAND GRINDER, SMOOTHING PIPE WHERE IT HAD BEEN CUT SO PIPE COULD BE PULLED INTO FRANGE OF PUMP LOST CONTROL TWISTED BACK TO FOREARM.

HE WAS REMOVING A PLATE FROM THE TAIL HOPPER OF A PIT CONVEYOR. HE WAS WEARING SAFETY GLASSES BUT NOT CUTTING GLASSES THAT HAD BEEN FURNISHED. A PIECE OF SLAG GOT INTO HIS EYE.

WHILE HELPING CRANE OPERATOR RIG FOR LIFTING OF JAW CRUSHER, OPERATOR PULLED CABLE WITH A JERK, THIS SENT EDGE THAT HOLDS CABLE FLYING. HIT HIM IN LIP.

WHILE WELDING STOPPED & RAISED HOOD WHEN SLAG POPPED OFF WELD.

EMPLOYEE WAS USING STEEL ROD TO POKE MUD THROUGH JAW CRUSHER WHILE MACHINE WAS RUNNING WHEN THE MOVEABLE JAW CYCLED IT PINCHED HIS LEFT HAND BETWEEN THE BAR AND CRUSHER CHUTE

I.NAME CUTTING SCREEN AGAINST HAND RAIL CAUSING HANDRAIL TO BE HOT.I.NAME BACK WAS TURNED AND DIDNT SEE I.NAME APPROACHING.I.NAME TOUCHED HOT HAND RAIL.

THE INJURED WAS FABRICATING A CHUTE IN THE PATRIOT SHOP.HE CLAIMS A PIECE OF SLAG ENTERED HIS EYE WHILE HE WAS WELDING.

THE INJURED WAS3DOING A WELDING JOB FOR PLANT MAINTENANCE.HIS WELDING HOOD WAS THE TYPE THAT HAS THEW HINGED LENS HOLDER THAT CAN BE RAISED WITHOUT RAISING THE HOOD.HE RAISED THE OUTER LENS AN D BEGAN CHIPPIN1 HIS WELD.HE DID NOT REALIZE THAT THE CLEAR PROTECTIVE LENS HAD BEEN REMOVED.HE GOT SLAG IN HIS LEFT EYE.

I.NAME & ANOTHE9 EMPLOYEE WERE REPAIRING A RECEIVING H OPPER IN M-2 TUNNEL I.NAME RECEIVED FLASH BURNS IN BOTH EYES

I.NAME WAS USIN1 AN ARC/AIR WEODER TO REPAIR A TAIL PULLEY. HIS FULL FACE HOOD DID NOT PREVENT FLASH LEAKAGE. IT SHOULD HAVE HAD A LOWER NECK PROTECTOR & PERHAPS DARKER LENSE.

WHILE RUNNING SAND UP TO READY-MIX BLEVINS FOUND GATE IN TUNNEL CLOGGED. WHILE POKING AT SAND LUMP FROM THE OTHER SIDE OF GATE HIT HIS HAND. SMASHING IT INTO METAL GATE CUTTING RIGHT HAND TOP OF WRIST.