Buscar en el registro

IW was cutting out a bearing and hot slag went under their safety glasses and into their eye.

While operating an excavator a small rock became dislodged and flew through the open window of the cab striking employee in the face above left eye.

REMOVING ELECTRICAL DRIVE MOTOR ON D3 SCREEN AT THE SECONDARY CRUSHER PLANT. BIG TOE ON RIGHT FOOT WAS HIT WHEN LIFTING EYE ON MOTOR BROKE DROPPING MOTOR.

EMPLOYEE WAS USING MIG WELDER TO BUILD UP BARS INSIDE PRIMARY CRUSHER. HE RAISED HIS WELDING SHIELD UP WITH SAFETY GLASSES ON UNDERNEATH. HE BENT OVER TO MEASURE THICKNESS OF THE BAR, SLAG IN THE WELD POPPED, WENT UNDER SAFETY GLASSES.

GRINDING A SPLICE IN CONVEYER BELT, FOREIGN MATTER ENTERED WORKER'S EYE.

BURNING RIBS OFF CAT TRUCK WITH BURNING TORCH

EMPLOYEE WAS WORKING FROM A LADDER REPLACING LINNERS, AN IMPACT WRENCH HE WAS USING FELL FROM ABOVE STRIKING HIM ON THE RIGHT HAND.

WHILE EMPLOYEE WAS WELDING A PIECE OF HOT SLAG FLEW UP INTO HIS EAR, RESULTING IN BURNS TO HIS LEFT EAR.

54736YEE REPORTED THAT WHILE GRINDING RUST FROM A WATER TANK WITH A HAND GRINDER A PARTICLE OF RUST LODGED IN HIS RT EYE HE CLAIMS HE WAS WEARING SAFETY GLASSES AT THE TIME

USING TORCH WHEN SOMETHING LODGE IN EYE

WHILE EMPLOYEE WAS USING AN ELECTRIC HELD GRINDER TO GRIND A METAL SUFACE,PARTTICLES FLEW UP LODGING IN HIS EYE.

EMPLOYEE WAS USING A HAND HELD POWER DRILL TO DRILL HOLE IN STONE WHILE HE WAS DRILLING THE DRILL CAUGHT HIS CLOTHING RESULTING IN A LACERATION OF THE LEG

EMPLOYEE WAS HARD FACING CRUSHER UNITS WITH AN AUTOMATIC WELDER. HE HAD REMOVED HIS FACE MASK TO ADJUST THE CONTROLS AT WHICH TIME HE RECEIVED WELDING FLASHES TO BOTH EYES.

EMPLOYEE WAS WEARING PRTECTIVE EYE GLASSES AND WAS USING A PRESSURIZED AIR HOSE TO CLEAR AN AREA IN THE PRIMARY CRUSHER WHEN SOME DEBRIS FLEW UP AND LODGED IN HIS RIGHT EYE.

EMPL WAS USING JACKHAMMER TO BREAK CONCRETE WHEN JACK HAMMER SLIPPED & FELL STRIKING EMPL ON RIGHT FOOT.

EMPL WELDING IN PRIMARY CRUSHER WHEN SPARKS FROM WELDING FLEW INTO RIGHT EYE.

WHILE EMPLOYEE WAS WELDING HE NOTICED BURNING SENSATION IN HIS EYES.

EMPLOYEE WAS SETTING PIPE FOR DRILL HOLE WHEN THE CENTERALIZER SLIPPED ON THE DRILL CATCHING HIS HAND BETWEEN THE DRILL & DRILL TABLE

EMPLOYEE WAS WELDING IN THE PRIMARY CRUSHER WHEN HE RECEIVED FLASH BURNS TO THE EYES.

EE WAS USING A BURNING TORCH WHEN FOREIGN MATERIAL FLEW SCRATCHING HIS RIGHT EYE.

WHILE EMPLOYEE WAS DRILLING HOLES IN FLOOR TO ANCHOR A NEW SHAKER, A PIECE OF FOREIGN MATERIAL FLEW UP AND LODGED IN HIS LEFT EYE.

EMPLOYEE WAS USING A CUTTING TORCH TO CUT PIPE AT THE WASH PLANT WHEN HE FELT IRRITATION IN HIS RIGHT EYE

EMPLOYEE WAS OPERATING A DROP BALL CRANE BREAKING LARGE ROCK. WHEN A PIECE OF ROCK FLEW UP STRICKING AND LACERATING HIS LEFT RING FINGER.

PREP PC OF METL FOR WELDING WITH CHIPPING HAMMER PC OF METAL FLEW UP STRIKING HIM IN R EYE

EMPLOYEE WAS WELDING SIDE WALL PLATES IN PARIMARY CRUSHER WHEN HIS RIGHT THUMB BECAME WEDGED BETWEEN TWO OF THE PLATES.

EMPL WAS USING CUTTING TORCH TO CUT OVERHEAD METAL.. AFTER CUTTING PICE OF METAL IT FELL & DEBRIS LODGED IN EDPLS EYE.

EMPLOYEE WAS WELDING INSIDE THE PRIMARY CRUSHER, WHILE WORKING HIS RIGHT FOOT SLIPPED AND HE BUMPED HIS FOOT AGAINST THE HOT BARS THAT HE WAS WELDING INJURING SAME.

EMPL SMOOTHING METAL WELD WITH HAND GRINDER.METEAL DEBRIS FLEW UP STRIKING FACE.WAS WEARING EYE PROTECTION.

WHILE MOVING TRACK DRILL AND COMPRESSOR EMPLOYEE RAN OVER BULL HOSE WITH COMPRESSOR-PULLING THE END OUT OF THE VALVE THREADS HOSE WHIPPED HITTING HIM ON RIGHT LEG

EMP WAS CUTTING AND WELDING IN NO 1 CHUTE PRIMARY CRUSHER AND HOT MOLTEN PIECES OF STEEL ENTERED THE BOOT OF HIS LEFT FOOT