Buscar en el registro

EE sustained a laceration to middle finger of right hand when they grabbed the hedge trimmer they were using to dislodge the blade which was hung up in a bush.

While welding on the Stedman crusher, EE had a piece of hot slag hit their face under the welding hood and safety glasses. EE removed their welding gloves and rubbed their face where the slag had hit and brushed particles of metal into the right eye.

While lacing the lime screen belt back together with electric drill, the drill twisted causing his hand to be torqued before he could let go of the drill. Thought was a sprain, but next morning hand & finger swollen. Medical treatment 7/16/15 revealed broken right ring finger. Company accommodating restricted work activity.

Employee finished grinding metal, while removing safety glasses, felt something enter his right eye. He used wash solution at the 1st aid station and thought ok. Overnight his eye became irritated, sought medical attention on 4/8/14. Doctor treated and released.

Turning primary impact pulley, the index, middle and ring fingers of left hand smashed between v-belt and pulley. Fracture middle finger, contusion, abrasion index and ring fingers. Medical treatment. Restricted work activity.

While working in the air separator, operating a hand grinder to grind down the welds on the sides and wearing safety goggles and a full face shield, employee got something in his right eye. Medical Treatment on 3/7/13 with follow-up scheduled.

Employee was changing filter on 769C Cat truck. He bent down under truck to use impact wrench. He bent over to reach filter and felt something pop in the middle of his back.

Employee was operating dragline, cleaning out settling pons. Pulled friction bars back and released brakes. The brake levers came up and injured both legs. fractured right leg. currently off work. Note: currently employee at allsboro quarry. Working at huntsville quarry day of injury.

EMPLOYEE WAS GREASING WATER TRUCK WITH GREASE GUN, GREASE FELL INTO HIS LEFT EYE. EE DID NOT SEEK MEDICAL ATTN. UNTIL 9/7/04, AT THE EYE CENTER, WHERE FOREIGN MATERIAL WAS REMOVED FROM HIS LEFT EYE.

EE WAS GRINDING ON FRAME WORK IN SIMPLICITY WASHER SCREEN IN THE SECONDARY PLANT WHEN A PIECE OF METAL BOUNCED OFF SIDE WALL AND WENT INTO LEFT EYE (EE WAS WEARING SAFETY GLASSES AT TIME OF AC CIDENT).

EMPLOYEE WELDING STEEL IN IMPACT USING WELDING MACHINE, CLEANING FLUX OFF OF WASS (INSIDE IMPACT) FOREIGN BODY IN RIGHT EYE. MEDICAL ATTENTION RECEIVED 6/28/01, 1ST REPORT OF INJURY COMPLETED 6/29/01. NO LOST TIME.

EE WAS HELPING TO INSTALL GUARDS ON LOWER FEEDER #520008, WHEN METAL SHOVINGS CAME DOWN AND WENT INTO HIS RIGHT EYE. EE WAS WEARING SAFETY GLASSES AT THE TIME OF ACCIDENT.

EMPLOYEE WAS CUTTING A METAL PLATE AT PRIMARY CRUSHER WHEN FIRE FLEW UP OVER HIS WELDER HELMET &LANDED IN HIS RIGHT EYE.

REMOVING KELLY BAR (DRILL STEEL) FROM DM25 DRILL. KELLY BAR CAME OUT OF STABILIZER, WAS FALLING TO GROUND, CAUGHT LEG BETWEEN BAR AND BOOM. LEFT LEG JUST ABOVE THE ANKLE, BROKEN.

EE WAS WELDING--QUIT WELDING, HAD WELDING ROD IN HAND AND HOOD WAS RAISED--REACHED FOR HAMMER, HOOD FELL THUS KNOCKING ROD INTO EYE AREA--BURNED LEFT CORNEA AND EYELID.

USING A GRINDER AND SLIPPED

EMPLOYEE WAS PRESSURE WASHING LOADER STANDING ON TIRE WITH LEFT FOOT ON BUCKET CYLINDER

EE WAS CLEANING A HIGH PRESSURE PAINT GUN TRIGGER WAS DEPRESSED AND A MIXTURE OF AIR AND MINERAL SPIRITS WAS BLOWN INTO MIDDLE FINGER THRU FINGER NAIL.

EE WAS HOLDING A BOLT ON A PIECE OF EQUIPMENT WHILE ANOTHER EE TIGHTENED IT WITH AN IMPACT WRENCH.

86304ETAL FELL INTO EE S SHOE WHILE HE WAS WELDING.

FLASH BURNED EYES WHILE ASSISTING A WELDER.

WHILE MOVING TRAC DRILL COMPRESSOR SLIPPED MASHING FINGER

BURNED EYES WHILE WELDING

WELDING IN MILL PUSHING ON MOTOR

EMPLOYEE'S RIGHT HAND WAS CAUGHT IN CONE CRUSHER DISCHARGE BELT WHILE ATTEMPTING TO PUT RUBBER SKIRT BACK IN.

EMPLOYEE WAS CLEARING ROCK FROM SPOKEN CRUSHER WHEN THE CHUTE OVERFLOWED AND ROCKS FELL FROM CHUTE STRIKING EMPLOYEE'S RIGHT ARM.

PARTICLE ENTERED LEFT EYE WHILE EMPLOYEE WAS OPERATING A TRACK DRILL

EMPLOYEE WAS CHECKING TO SEE IF METAL WAS CUT ALL THE WAY THROUGH,BENT OVER AND TOUCHED HIS AHND WITH THE TORCH,BURNING THE MIDDLE AND RING FINGER OF HIS RIGHT HAND.

EMPLOYEE WAS GR3NDING INSIDE WASHER SCREEN CHUTE, THE GRINDER DISC LODGED UNDER EDGE OF PLATE AND CAUSED THE GRINDER TO KICK BACK STRIKING EMPLOYEE S KNEE.

EMPLOYEE WAS US3NG WELDING TORCH TO CUT FEEDER BOX OUT OF TUNNEL USED TO FEED ROCKS TO PUG MILL. CONVEYOR PULLEY WEIGHING APPROX. 300 POUNDS ROLLED ONTO FOOT, BREAKING TWO BONES.

HINGE ON STEEL 8OOR OF TUNNEL CAME LOOSE LETTING DOOR FALL AND STRIKE EMPL.

DRILL HUNG,CAUSING IT TO TWIST AND PIN EMPL HAND BETWEEN IT AND STEEL SHOE ON CRUSHER.