Buscar en el registro

WHEN AIR BLASTER WAS ACTIVATED, ROCKS HIT WINDOW OF DOZER WHICH BROKE CAUSING GLASS TO ENTER EE S EYE.

EE CUTTING METAL WITH A TORCH WHEN HOSE CAME OFF CUASING BURNS TO LOWER LEFT ARM & ABDOMEN AREA

WHILE CUTTING A BOLT WITH A BLOW TORCH, BURNED LEFT HAND,WRIST, AND FOREARM

EE WAS REACHING OVER THE TOP OF A FEED CHUTE TO INSERT A BOLT WHILE ANOTHER EE WHO WAS NOT AWARETHAT HIS HAND WAS IN THAT AREA, PASSED A LIT TORCH OVER THE BACK OF IT BURNING HIS HAND

EE WAS USING A HAND GRINDER CLEANING UP STEEL PLATE WHEN HE WAS STRUCK BY A STEEL CHIP IN THE LEFT EYE.

EE WAS GRINDING ON METAL SURGACE WHEN METAL PIECE RICOCHED INTO HIS EYE.

EE WAS PUSHING MATERIAL INTO A PILE WHEN HE TWISTED HIS BACK.

EMPLOYEE WAS STANDING NEXT TO A CO-WORKER THAT WAS WELDING AND RECEIVED FLASH BURN IN HIS EYES.

EE BENT OVER TO CHECK 4" WATER PUMP, BEARING WHEEL BROKE ON BEARING & HOT GREASE FROM BEARING BLEW ONTO HIS FACE.

EMPLOYEE WAS GREASING U-JOINT ON LOADER WITH PRESSURIZED GREASE GUN. THE NEW GREASE UNDER PRESSURE FORCED THE OLD GREASE TO SHOOT OUT INTO HIS EYE.

EMPLOYEE WAS USING TORCH TO CUT STEEL ON FLUME LINE WHEN TORCH POPPED AND BURNT LEFT HAND.

EE WAS DIRECTING THE CRANE OPERATOR IN LIFTING CONVEYOR'S COUNTERWEIGHT WHEN THE WEIGHT BECAME UNBOUND AND SWUNG OVER AND PINCHED HIS ANKLE BETWEEN THE COUNTER WEIGHT FRAME AND COUNTERWEIGHT.

WHILE TRYING TO REMOVE LOCKING PIN, THE HOPPER WAS BEING LIFTED BY A MECHANICAL SHOVEL. THE EE GOT HIS FINGER CAUGHT BETWEEN THE PIN AND THE HOPPER.

HOIST CABLE ON DRAGLINE BROKE. THE CABLE FELL DOWN THE BOOM AND STRUCK EE IN THE FACE.

EMP WAS UP ON DUST SILO SHUTTING OFF VALVE WHEN THE AIR LINE BROKE BLOWING DUST PARTICLES INTO HIS FACE AND EYES.

EMPLOYEE WAS HOOKING UP RIGGING (LARGE SHACKLE) TO OVER-HEAD CRANE BLOCK WHEN HIS RIGHT THUMB BECAME SMASHED/PINCHED BETWEEN TWO OBJECTS. EMPLOYEE DID NOT SEEK MEDICAL ATTENTION UNTIL 4-12-96.

EMPLOYEE WAS WELDING IN A AWKWARD POSITION AND A DROP OF HOT METAL FELL INTO HIS BOOT BURNING HIS LEFT FOOT. EMPLOYEE DID NOT SEEK MEDICAL ATTENTION UNTIL 2-15-96.

CRANE OPERATOR EXTENDED BOOM WITHOUT LOWERING LOAD BLOCK. HE CONTINUED TO EXTEND BOOM UNTIL THE LOAD LINE BROKE STRIKING EE IN THE BACK.

WHILE EE WAS CUTTING BROKEN ADAPTOR OFF CAT WITH TORCH, HE WAS HIT BY CHEST PAINS.

GRADUAL ONSET OF BACK INJURY FROM OPERATING A DOZER & OTHER HEAVY EQUIPMENT OVER A PERIOD OF 26 YEARS.

EMPLOYEE WAS WELDING IN ROCK HOPPER USING AIR CHIPPER AND THE AIRBORNE DUST FROM THE CHIPPER FLEW INTO HIS RIGHT EYE.

WHILE WELDING UNDER SCREEN, DUST OR STEEL PARTICLE FELL INTO EE'S RT EYE.

EE WAS REMOVING WEAR SEGMENTS FROM 988B BUCKET WITH A 1" IMPACT AIR GUN. THE PLOW BOLT FELL OUT OF KEYED SLOT AND STARTED SPINING WHICH CUT HIS ARM (WRIST).

EE WAS HOLDING A STEEL PLATE IN PLACE WHILE ANOTHER EE WAS WELDING, HIS ELBOW HIT THE WELDING TORCH CAUSING OXYGEN TO ESCAPE FROM THE WELDING SPARKS. THIS CAUSED THE TORCH TO BURN HIS LEFT ARM .

EE WAS WORKING WITH A HYDRAULIC PRESS TO REMOVE SHAFT FROM A BEARING. UNEXPECTED MOVEMENT OF THE JACK ASSEMBLY WHILE BEING INSTALLED INTO POSITION CAUSED EE'S FINGER TO LODGE BETWEEN THE BOLT AND PLATE ASSEMBLY CUTTING THE TIP OF HIS RIGHT FINGER.

EMPLOYEE WAS HAVING DIFFICULTY GETTING A GROUND ON THE PIECES HE WAS WELDING SO HE RAISED HIS DARK LENS TO SEE WHAT THE PROBLEM WAS. AT THAT TIME THE WELDING ROD ARCHED BURNING BOTH OF HIS EYE S.

EMPLOYEE WAS CITTOMG WOTJ AOR ARC - STOPPED TO REPOSTION CABLE LEAD, TURNED TO STRUCK AN ARC WITH THE AIR ARC ROD AGAINST TRUCK BED, CAUSING VIEW OF EYE WITHOUT EYE PROTECTION.

WHILE CUTTING METAL WITH A CHOP SAW, SPARKS RICOCHETED OFF HARD HAT INTO LEFT EYE.

EMPLOYEE WAS MAKING A LEFT TURN WHEN THE BOB CAT STARTED TO BOUNCE. AT THAT TIME HE COUGHED. THIS CAUSED HIS MUSCLES TO TIGHTEN UP.

DR'S FIRST MEDICAL REPORT NOT RECEIVED UNTIL 10-9. EMPLOYEE WITH THE HELP OF ANOTHER EMPLOYEE WAS REPLACING A SKIRT ON THE FEEDER WHEN THE OTHER EMPLOYEE ACCIDENTLY RAN A LIT OXY-ACT TORCH OV ER THE EMPLOYEE'S RIGHT HAND BURNING HIS 3RD, 4TH, AND 5TH FINGERS ON THAT HAND.

FINISHING HOLE REACHING DRILL CONTROLS STRUCK ON R CALF BY ROCK ROLLED DOWN THE SLOPE

EMPL WAS LAYING ACROSS TIRE ON 980C LOADER GRINDER ON WELD WHEN PIECE OF SLAG OR STEEL GOT INTO EYE.

EMP WAS WELDING & SOMETHING GOT INTO EYE.

CUTTING TORCH BLEW UP OR POPPED VERY LOUD.

OPERATOR OF CRANE MISREAD HAND SIGNAL AND JERKED CABLE UP WHILE EMP HAD A HOLD OF CABLE.

THIS REPORT IS BEING AMENDED PER THE ATTACHED 5020 REPORT. EMP ALLEGES PULLING ON LOADER THROTTLE TO KILL MOTOR, FELT BACK POP. EMPLOYER NOTIFIED OF INJURY 10-25.

DOCTOR'S REPORT NOT RECEIVED UNTIL 10-30-89. EMPLOYEE RELEASED HOOK ON HOIST HE CAUGHT HIS LEFT FINGER BETWEEN THE CABLE AND THE BOOM.

RECEIVED FROM PALA PLANT ON 8/7/89 EMPL DID NOT GOTO COMPANY DR EMPL WAS WELDING AND BURNED FOOT

WHILE WELDING, EYES EXPOSED TO ULTRA-VIOLET RAYS FROM WELDING ARC.

EMPL HAD BEEN CUTTING AND WELDING BOLTS ON MAIN FRAME OF CONE CRUSHER AT PLANT.WHEN HE FINISHED WELDING THE LAST BOLT,RAISED WELDING HOOD DISCOVERED HAD SOMETHING STUCK ON RIGHT EYE IN CENTER OF PUPIL.

WHILE GRINDING METAL GRINDING DUST ENTERED LEFT EYE.

WHILE USING A GRINDING WHEEL AND WELDING- FOREIGN PARTICLES CAME INTO MY LEFT EYE.

WHILE OPERATING D8 DOZER WIRE ON SEAT LATCH BROKE DROPPING OPERATOR AND SEAT TO FLOOR OF DOZER

WORKING ON 190B SHOVEL 1 DRIVE IMPACT AIR DRIVEN SLIPPED OFF NUT & FELL ON EMPLOYEES ARM

WHILE ASSISTING A WELDER EMPL LOOKED AT THE WELDING ARC FLASH BURN TO BOTH EYES

WORKING WITH JACK HAMMER ON ROCK WITHOUT SAFETY GLASSES

WHILE WELDING HE GOT DIRT INTO HIS EYE.

EMPLOYEE PULLED BACK WHILE BULLDOZING AND JARRED BACK.

WHILE USING A CUTTING TORCH A PIECE OF MOLTEN STEEL POPPEDINTO EAR

EMPLOYEE WAS BEING LIFTED IN A MAN BASKET BY A CRANE CRANE WAS SWUNG TO THE RT AND EMPLOYEE FELL