Buscar en el registro

In the process of changing hammers, EE was unscrewing it and lost control of the hammer injuring left index finger. (Cut & bruised.)

Employee was using a pressure hose cleaning around the wash plant. He was washing around the log and was in a tight area. He felt his back strain.

Employee was drilling holes mounting a fender. The drill bit caught and forced the employee's hand through a head light cutting his hand.

Injury was operating a bull dozer and he was hooking a lime bin to the dozer so the bin could be moved. After the bin was hooked up and ready to move he noticed a rock underneath a wheel on the bin and attempted to remove it. As he did this the dozer pulled forward. The wheel went over his arm, shoulder, back, and center of his body.

Employee was loosening a wheel on a press when it suddenly released, causing employee to lose his balance and let go of wheel with right hand. His body swung around to the side on press while he was still holding on with his left hand. MRI was done 10/13/06 and informed on 10/18/06 that surgery was required to repair tear.

EE WAS WORKING IN SHOP DOING GENERAL REPAIR TO INCLUDE CUTTING AND GRINDING. EE IS NOT CERTAIN WHEN THE INJURY OCCURRED. EE WAS WEARING SAFETY GLASSES. EE THOUGHT OBJECT CAME OUT OF EYE BY IR RIGATION. A COUPLE OF DAYS LATER WAS TAKEN TO OPTOMETRIST, UPON EXAM, A PIECE OF STEEL IMBEDDED IN HIS RIGHT EYE, WAS SUPERFICIALLY IMBEDDED, SPUD WAS USED TO REMOVE OBJECT WITHOUT COMLICATION

DRILLING WITH A HAND DRILL WHEN THE DRILL BIT CAUGHT, RESULTING IN THE HANDLE TO SPIN A PINCHEING THE EE HAND BETWEEN THE DRILL AND A TRASMISSION PAN. RESULTING IN A 1.5 CM LACERATION RECEIVIN G 2 SUTURES.

WORKER STRUCK THE DOOR WITH THE HANDLE END OF A LARGE CRESCENT WRENCH. AFTER STRIKING THE DOOR, THE WRENCH TRAVELED DOWN THE CHUTE FOLLOWING THE ANGLE. UPON REACHING THE BELT, THE WRENCH HANDL E WAS DRAWN UNDER THE CHAIN AND PULLED INWARD. PINNED HIS HAND AGAINST THE GUARD OVER TAIL PULLEY, IT PINCHED AND PULLED OFF ONE HALF OF THE INDEX FINGER, ALSO A THUMB LACERATION.

USING GRINDER IN TIGHT AREA. EMPLOYEE HAD SAFEY SHIELD ON GRINDER GOT STUCK IN AREA. SUCCEED OFF OF STEEL STRIKING SAFETY SHIELD.

EMPLOYEE WAS TALKING TO ANOTHER EMPLOYEE WHO WAS OPERATING A ACTANATIC WELDER-BUILDING UP ROLLS. EMPLOYEE DID NOT HAVE C. DEGUATE EYE PLATECTION-REFLECTION FROM WELDING ARC-BURNED EYES-EMPLOYE E DID NOT NOTICE DAMAGE DONE TILL ON HIS WAY HOME.

USING GRINDER IT SLIPPED OUT OF EMP HAND CAUSING BLADE ON GRINDER TO STRIKE EMP L LEG ABOVE KNEE CUT 2 LONG REQU 6 STITCHES

WEATHER CONDITION WAS RAINING EMPLOYEE HAD COAT LYING OVER FRONT OF RADIATOR TO DRY FAN BLADES WAS REVERSED & BLOWING AIR OUT THE FRONT OF ENGING JACKS WERE IN PLACE EMPLYEES GOT COAT & AS HE WENT BY THE SIDE OF THE ENGING SUCTION FROM THE FAN PULLED HIS COAT INTO RADIATOR PULL WAS SO QUICK THAT ALT HOUGH EMPLOYEE DID NOT HAVE COAT ON HE COULD NOT LET GO OF IT FAST ENOUGH AMPUTATIO

CUTTING STEEL BEAM EMP HAD FOOT UNDER BEAM WHILE HE CUTTING AFTER BEAM HAD BEEN CUT FAILED TO MOVE FOOT OUT OF WAY

EE CLEANING OUT PLUGGED MILL REACHED IN MILL TO MOVE STONE HAMMERMILL MOVED PINCHING AND PINNING EE RIGHT HAND.

EMPLOYEE WAS CUTTING OUT CRACK ON DISCHARGE CHUTE ON WASHING PLANT, METAL FLAKED OFF WHILE CUTTING, LODGING ON EMPLOYEE'S RIGHT EYE. EMPLOYEE WAS WEARING PROPER SAFETY GLASSES AT THE TIME ACCI DENT HAPPENED.

MEN WERE WORKING WITH CABLES BETWEEN A CRANE AND A SAND DREDGE WHEN EMPLOYEES FINGER BECAME CAUGHT IN BETWEEN TWO CABLES