Buscar en el registro

The grinding machine that employee was operating stopped functioning. He was trying to check the tension on the drive belt when the pulley engaged and his left index finger ran through the pulley degloving the tip of his finger.

EE WAS USING A WENCH TO OPEN DOORS ON THE BOWL MILL, THE SAFETY LATCH DID NOT FULLY ENGAGE AND THE WENCH HANDLE BACK SPUN AND STRUCK THE EMPLOYEE'S RIGHT INDEX FINGER CAUSING A FRACTURE

EMPLOYEE WAS ASSISTING WITH THE SET UP OF A CRANE FOR DRAGLINE. WHILE STANDING ON THE TRACK HELPING TO GUIDE THE MAIN HOIST INTO POSITION IN ORDER TO PUT GANTRY IN PLACE, CABLES THAT WERE ATTACHED TO THE GANTRY WERE PULLED CAUSING THE GANTRY TO TIP & FALL. PART OF THE GANTRY HIT HIS LEG RESULTING IN A GROSS CONTUSION & SPRAINED RT. FOOT.

THE EE WAS JACKHAMMERING IN THE KILN AND FELL. THE EE FELL ON THE LOOSE MATERIAL IN THE KILN.

EMPLOYEE WAS CUTTING WITH TORCH WHEN A PIECE OF SLAG FELL ONTO OXYGEN HOSE LINE OF WELDING RIG AND HE GRABBED THE BURNING HOSE CAUSING A BURN TO LEFT INDEX FINGER.

EE WAS ASSISTING MAINTENANCE MANAGER IN CHANGING 6" SUCTION HOSE ON PIT PUMP. WHEN THE HOSE RELEASED FROM THE PUMP THE COUPLING ATTACHED STRUCK EE IN THE CHIN. EE HAD TO HAVE SUTURES IN THE LA CERATION ON CHIN.

EE WAS WELDING ON BACK OF #1 KILN FIRE WITH ANOTHER EE. WHEN INJURED RAISED HIS HOOD, HE GOT A FLASH BURN FROM OTHER'S WELDER.

EE WAS WORKING ONA CRUSHER PART WHEN A HAT STAINLESS TEEL ROD FELL IN HIS BOOT AND BURNT HIS ANKLE.

EMPLOYEE WAS GRINDING ON KILN #3 CRANKHEAD SHAFT. ANOTHER EMPLOYEE TRIPPED OVER THE EXTENSION CORD TO THE GRINDER, CAUSING THE GRINDER TO SLIP. THE GRINDER THE STRUCK EMPLOYEE ON THE FINGER CAUSING A CUT. IF EMPLOYEE WAS WEARING GLOVES, HE MAY NOT HAVE BEEN INJURED.

MOVING IR FAN STACK - TRACK HOE HAD CHAIN AROUNDID FAN EE WAS GUIDING IT AS OTHER EE WAS OPERATING TRACK HOE. CHAIN SLIPPED & STARTED SWINGING & HIT EE IN FRONT PELVIC AREA & PINNED HIM BETWEE N STACK & BOWL MILD PART.

EMP WAS UNSTOPPING THE STARFEEDER CHUTE. WHEN HEWENT TO CLOSE THE CHUTE DOOR THE SUCTION FROM THE FAN PULLED THE DOOR TO. HIS FINGER WAS CAUGHT BETWEEN THE DOOR AND CHUTE.

EMPLOYEE WAS ATTEMPTING TO CLEAN GREASE PUMP WHEN HE STUCK HIS FINGER INTO THE PUMP TO REMOVE GREASE AND DIRT IN THE CYLINDER. THEN TURNED THE GUN ON WITH HIS LEFT HAND CAUSING THE INTERNAL CY LINDER TO OPERATE WHICH AMPUTATED FINGER TIP.

EE AND EMPLOYEE WERE JACKHAMMERING IN KILN #@. EE STOPPED TO REST. EMPLOYEE JACKHAMMER SLIPPED AND STRUCK EE ON THE FINGER RESULTING IN A CRACK OF THE BONE.

EMPLOYEE WAS WELDING ON #2 COOLER WHEN THE SUPPORT THROAT SLIPPED STRIKING EMPLOYEES RT INDEX FINGER

EE &EE WERE GOING TO CHANGE THE BELTS ON 1ST COMPLIANCE FAN EE TURNED ELECTRICTY OFF & LOCKED OUT THE MAIN SWITCH LEFT SWITCH & GOT TO FAN WAS COASTING & THEN STOCKPILE THEN DRAFT FROM COOLER MADE IT GO IN LENETSEE HE WAS GOING TO STOP FAN WHILE EE WAS TO XXXXX BOLTS & HE PUT A BAR UNDER THE SHAFT IT UNG UPON SOMETHING & BROUGHT BAR UNDER EDGE CHIN KNOCKING HIM UP OFF THE GROUND

WHILE LIFTING A DUMP TRUCK TAILGATE WITH A TRACK-HOE AND A CHAIN, THE CHAIN CAME LOOSE ALLOWING THE TAILGATE TO DROP. AFTER LANDING, THE TAILGATE FELL OVER ON THE EMPLOYEE'S LEG.

WHILE CHECKING THE OPERATION OF THE KILN, A CINDER BLEW BACK FROM THE KILN INTO THE EMPLOYEE'S EYE. THE EMPLOYEE WAS WEARING SAFETY GLASSES AND A FACE SHIELD.

SM BURN ON R LEG NEAR ANKLE STRADDLING BEAM UP HIGH WELDING, THREW AWAY BURNED OUT SM PC WELDINGROD, IT LANDED AGAINST PANTS LEG AND INSIDE OF SHOE

WHILE TAKING A SAMPLE OF AGGREGATE FROM THE KILN BACKFIRED CAUSING THE EMPLOYEE TO JUMP BACK.THE EMPLOYEE STRUCK HIS LEG ON THE FOUNDATION OF THE FIRING HOOD.

THE EMPLOYEE WAS WELDING. HE STOPPED AND LIFTED HIS WELDING HELMET. AT THIS POINT A PIECE OF FLUX FROM THE WELDING ROD POPPED INTO HIS LEFT EYE.

EMPLOYEE WAS USING A JACKHAMMER WHEN IT SLIPPED AND STRUCK HIS LEFT FOOT CUASING INJURY TO HIS 2ND AND 34D TOE. EMPLOYEE SUFFERED SOME SWELLING AND WAS SENT FOR MEDICAL HELP.

EMPLOYEE WAS OPERATING JACK HAMMER IN KILN #3 WHEN HE BRACED HIMSELF AGAINST THE KILN WALL AND CUT HIS FINGER ON THE WALL.

EMPLOYEE WAS STEAM CLEANING CEMENT WHEN HE DIRECTED THE NOZZLE TOO CLOSE TO HIS LEG. HE SUFFERED MILD BURN FROM STEAM ON HIS RIGHT ANKLE.

GOT SOME DUST IN RIGHT EYE AND SCRATCHED IT.NOT WEARING SAFETY GLASSES.

EMPLOYEE WAS WELDING NEXT TO CO WORKER. WAS WELDING ON MULTI-CLONE AND SHE RAISED HER HOOD, THE TORCH FLASH FROM THE OTHER WELDER BURNED HER EYE.

EMPL WAS WELDING ON CONVEYOR FOR COOLER. LENS ON WLEDING HOOD & GASKET MUST HAVE HAD SMALL CRACK WHICH CAUSED FLASH FROM TORCH TO BURN EYES. DR PRESCRIBED MEDICATION FOR EYES.

WAS WELDING & WORKING AT COAL MILL,TINY SLIVER OF RUST POPPED INTO EYE.CONTINUED TO WORK EVERY DAY BUT EYE STILL BOTHERING HIM ON 7-18 AND WENT TO SEE EYE DR WHO DIAG PIECE OF RUST -GOT IT OUT OF RUST OR FOREIGN OBJECT GOT IT OUT.

EMP SAID SMOKE STUFF BLOWING OUT OF SCRUBBER WHILE HE WAS SITTING IN CRANE AS OPERATOR WORKING ON INLET HOOD CAUSED RASH ON ARM. HE WENT SENT TO SEE DR WHO GAVE HIM PRESCRIPTION FOR TOPICORT C REAM TO USE ON RASH.

WAS WELDING & WHEN RAISED HOOD TO CHANGE OUT WELDING RODS FLUX POPPED & HIT IN LEFT EYE.

WAS WLEDING ON CONVEYOR.

WAS WELDING & WHEN RAISED HOOD TO CHANGE OUT WELDING RODS FLASH BURN TO EYE.

EMPL WEAS GRINDING PIECE OF STEL FOR SCRUBBER WITH GRINDING WHEEL & TINY CHIP OF STEEL GOT INTO EYE.

WAS WLEDING & FITTING PIECES ON INLET HOOD.

EMPL WAS USING GRINDING WHELL TO MAKE PART NEEDED ON KILN CONSTRUCTION GRINDING WHEEL CAUGHT SHIRT FRONT AND WHEEL WENT UP ABDOMAN AND AROUND UNDERNEATH L BREAST CAUSING BRUISES

WAS WELDING & FLASH BURNED EYE. SAID DIDN'T BOTHER HIM TOO MUCH UNTIL THAT NIGHT & HE WENT TO EM ROOM AT HOSP.

RAISED SHIELD ON HIS WELDING HELMET TO CHANGE OUT WELDING RODS AND FLASH FROM ANOTHERS WELDING TORCH BURNED EYES

WHEN RAISED SHIELD ON WELDING HOOD TO CHANGE OUT RODS FLASH FROM ANOTHER WELDERS TORCH BURNED EYE.

EMPL RAISED SHIELD ON HIS WELDING HOOD TO CHANGE OUT HIS WELDING RODS AND FLASH FROM NEARBY WELDERS TORCH BURNED EYES

CHIPPING SLAG DURING WELDING AND SMALL CHIP OF SLAG POPPED INTO RIGHT EYE.

EMPL WELDING,TURNED AROUND AND LIGHT FLASH FROM TORCH BURNED EYES.

THE EMPLOYEE HAD WELDED A N EYE BOLT TO THE KILN BURNER PIPE.WHILE HOISTING THE PIPE BACK,THE EYE BOLT BROKE AND HIT THE EMPLOYEE ON THE LEFT SHOULDER CAUSING A BRUISE.

EMPLOYEE WAS BURNING, CUTTING PIPE OVERHEAD AND SLAG FELL INTO GLOVE AND BURNED TOP LAYER SKIN ON LEFT ARM ABOVE WRIST. GOT INFECTED OVER WEEKEND. SAW DR MON. 2-6-89 AND EACH DAY SINCE TO DATE 2-9-89.

EMPL WAS USING JACKHAMMER & SHOVELING OLD CASTABLE FROM #2 KILN TO CLEAN KILN FOR REPOURING OF NEW CASTABLE.

NO LOST WORK TIME PICKED ;UP MACHINERY PART WITH LIFT OF CRANE AND LOWERED IT NEARLY TO GROUND GOT OFF CRANE AND WAS SWINGING THE PART ON LIFT AROUND BY HAND PART STILL ATTACHED TO CRANE LIFT AND HIS LEFT FOOT GOT BETWEEN THE SWINGING PART AND GROUND MASHED THIRD TOE TOOK SKIN OFF AND LATER IN WEEK INFECTION.