Buscar en el registro

EE STATES RODS FELL AND CAUGHT ROD CLAMPS, FOOT PEDAL RELEASE, CAUSING PEDAL TO GO BACK IN UPWARD POSITION WITH EXTREME FORCE.

EMPLOYEE WAS KNOCKED OFF OF A LADDER WHEN A BEAM OVERHEAD STRUCK THE LADDER. THE BEAM WAS BEING REPOSITIONED.

EMPLOYEE WAS ASSISTING IN REMOVAL OF 8" BY 8" TUBULAR STEEL FROM NEW CLINKER COOLER. AS ANOTHER EMPLOYEE CUT TUBE STEEL LOOSE WITH TORCH, INJURED EMPLOYEE LOST HIS GRIP ON CUT PIECE (APPROX 18 " LONG) AND DROPPED IT ON HIS RIGHT FOOT, CAUSING A FRACTURE TO BIG TOE.

EE USING TEAR OUT MACHINE IN KILN WHEN A BRICK PRICHOCET OFF MACHINE AND STRUCK HIM ON THE RIGHT FOOT.

EMPLOYEE WAS USING AN OXYGEN LANCE TO CUT SIDE WALL OUT OF CLINKER COOLER. OXYGEN REGULATOR MALFUNCTIONED CAUSING LANCE TO BACK FLASH AT LANCE HANDLE. EE HAS A 2" 2ND DEGREE BURN TO LEFT WRIST AND A 1ST DEGREE BURN TO LEFT THIGH.

EMPLOYEE HOLDING 4"X2"X3' PIECE OF INSTULATION WITH LEFT AHND WHILE DRILLING WITH RIGHT HAND. THE DRILL BIT CAUGHT PART OF HSI GLOVE AN DFRACTURED LEFT 5TH FINGER.

UNCHOKING THE 1003 CHUTE WITH A PRY BAR. THE MILL CAUGHT THE BAR AND IT HIT HIS HAND, SLAMMING IT AGAINST THE METAL GUARD. THE RING FINGER ON HIS LEFT HAND WAS BROKEN AND CUT REQUIRING STITCHES.

EE WAS ATTEMPTING TO REMOVE FOREIGN MATERIAL FROM A CEMENT PAKER. THE INJ EE GAVE INSTRUCTIONTO A FELLOW EE TO TURN THE IMPELLER BY HAND HIS HAND WAS TOO CLOSE TO THE IMPELLER & WAS CAU GHT BETWEEN THE IMPELLER & THE HOUSING

EMPLOYEE WAS GRINDING A PUMP SCREW IN THE SHOP. HE DID NOT EXPERIENCE ANYTHING ENTERING HIS EYE UNTIL THE NEXT DAY. HIS EYE WAS HURTING BADLY AND HE WENT TO DOCTOR ON02/11/99.

EE WAS OPERATING A DOZER. AS HE TURNED HIS HEAD TO LOOK TO THE REAR HIS HEAD STRUCK THE HANDLE OF THE FIRE EXTINGUISHER WHICH WAS MOUNTEDF IN THE CAB. THIS LACERATION REQUIRED STITCHES.

EE WAS CLEANING SMALL PORT FOR PHOTO EYE PATH AND MACHINERY MOVED, CATCHING END OF FINGER. (PALLETIZING MACHINE).

CUTTING METAL BIN STRAPS ON METAL WITH CUTTING TORCH. CUT ONE OF THE STRAPS THEN LOOKED AROUND TO SEE WHERE THE NEXT ONE WAS. HE WAS STEADYING THE TORCH AGAINST HIS RIGHT HIP AND AS HE TURNED THE TORCH TURNED TOO. HE FELT THE HEAT BUT DIDN'T REALIZE IT WAS BURNED UNTIL HE FINISHED.

WORKING ON COAL CRUSHER CHANGING OUT GRIZZLY BARS. BURNING OUT BARS WITH CUTTING TORCH THROUGH WINDOWS OF HOUSING. A PIECE OF HOT SLAG BOUNCED OFF ARBOR, THROUGH WINDOW, BEHIND CUTTING GOGGLES AND HIT GLASSES AND INTO EYE.

GRINDING PLATE IN SIDE OF BARGE TO PUT CABLE BACK ON. STANDING ON LADDER GRINDING (WEARING SAFETY GLASSES). DUST/METAL GOT IN EYE.

THE EMPLOYEE WAS INJURED WHEN HE WAS STRUCK BY A 2 1/2" AIR PIPE. HE WAS ATTEMPTING TO BLEED THE AIR LINE, ALONG WITH A FELLOW EMPLOYEE, BY USING A BALL VALVE THAT WAS INSTALLED IN THE SYSTEM. WHEN THE VALVE WAS OPENED THE FORCE OF THE ESCAPING AIR CAUSED THE PIPE TO TURN AND UNTHREAD FROM THE FLANGE THEN STRIKE THE EMPLOYEE.

EE WAS USING A PORTABLE GRINDER WHEN IT KICKED BACK AND PUSHED HIS HAND INTO THE WORK CAUSING THE INJURY.

WHILE GRINDING & WELDING ON CEMENT TANKER, A PIECE OF STEEL GOT INTO EYE.

EE WAS WALKING THRU CHAIN SYSTEM IN ROTARY KILN TO WORK AREA.

ADJUSTING MOTOR ON FEEDER. TIGHTENING BOLT OVERHEAD USING A HAMMER IMPACT WRENCH WITH EXTENSION SWIVEL AND SOCKET. SOCKET CAME OFF AND HIT SOME AND UPPER LIP.

METAL SHAVING WAS THROWN IN EYE WHILE DRILLING HOLE IN SCREW FLIGHT TO BOLT WEIGHT TO SCREW FLIGHT FOR BALANCE. EMP WAS WEARING SAFETY GLASSES. A PIECE OF STEEL WENT IN LEFT EYE.

EMPLOYEE WAS GRINDING OVERHEAD WITH A HAND HELD GRINDER WHEN A SMALL PIECE OF METAL FELL INTO HIS EYE. HE WENT TO THE URGENT CARE CENTER WHERE THE METAL WAS DRILLED OUT OF LEFT EYE. NO LOST DA YS OR RESTRICTED WORK ACTIVITIES.

EE WAS USING 110V 1/2" DRILL WHICH AGGRAVATED AN EXISTING ELBOW CONDITION.

EE WAS USING A JACKHAMMER TO REMOVE A FROZEN BUILD UP OF MATEIRAL IN A CHUTE. WHEN THE JACKHAMMER BECAME STUCK IN THE FROZEN MATERIAL THE EE INJURED HIS HAND IN AN ATTEMPT TO FREE IT.

EMPLOYEE BELIEVES THAT HERECEIVED A WELD FLASH BURN FROM ANOTHER WELDING OPERATION THAT WAS NEARBY HIS WORK AREA

YEE WAS WELDIGN SHANK ON BUCKE TOF 480 WHEN A FOREIGN BODY BLEW INTO HIS LEFT EYE. EE WAS WEARING A WELDING HELMET AND SAFETY GLASSES. WELDING SLAG WAS WEDGED IN LEFT EYE AND HAD TO BE REMOV ED.

EMPLOYEE WAS INJURED WHEN STRUCK BY A METAL PLATE THAT WAS PUSHED BY A FORKLIFT.

ON 9-29-94 TWO EE'S WERE WELDING A PATCH IN DISCHARGE CHUTE ON #4 BELT. EE WAS STANDING ON THE PLATE THAT OTHER EE WAS WELDING. ON 9-30-94, EE TOLD OTHER EE THAT HE THOUGHT HE HAD BURNED HIS F OOT. ON MONDAY, 10--3-94 AT ABOUT 1:00 PM EE TOLD TEAM LEADER THAT HE WAS GOING TO THE DR,TO SEE ABOUT HIS FOOT, AS HE THOUGHT HE HAD BURNED IT WELDING THE PATCH IN CHUTE LAST WEEK.

INJURED WAS WORKING IN BOTTOM OF COOLER CUTTING BOLTS WITH CUTTING TORCH. HE WAS NOT WEARING PROTECTIVE GLOVES DURING THESE PROCEDURES. SLAG FELL ONTO HIS ARM AND BURNED IT. SECOND DEGREE B URNS RESULTED WHEN GARY WAS CUTTING BOLTS OVER HEAD, AND SLAG FELL ONTO UNPROTECTED AREA.

EMPLOYEE WAS HAVING TROUBLE WITH JACKS WANTING TO LOWER PLATFORM. DOGS ON TWO JACKS FAILED [SLIPPED] LETTING PLATFORM DROP.

EMPLOYEE WAS HAVING TROUBLE WITH JACKS WANTING TO LOWER PLATFORM. DOGS ON TWO JACKS FAILED [SLIPPED] LETTING PLATFORM DROP.

EMPLOYEE WAS HAVING TROUBLE WITH JACKS WANTING TO LOWER PLATFORM. DOGS ON TWO JACKS FAILED [SLIPPED] LETTING PLATFORM DROP.

AFTER WELDING A GUARD FOR 1584 VALVE IN REPAIR SHOP EMPLOYEE WAS USING HAND GRINDER ON GUARD HE WAS WEARING HIS HOOD BUT FOREIGN PARTICLES RICOCHETED INTO EMPLOYEES LEFT EYE PARTICLES BECAME I MBEDDED EMPLOYEE SOUGHT MEDICAL ATTENTION ON 07-27-93 & HAD IMBEDDED OBJECTS REMOVED NO LOST TIME OR LIGHT DUTY ASSIGNED EMPLOYEE WAS WEARING HIS HOOD BUT NOT GOGGLES OR GLASSES UNDER THE WEL

FELLOW EMPLOYEE INADVERTENTLY TRIPPED THE FREE WHEEL DEVICE ON A SMALL HOIST. A SEAL WHICH WAS BEING HELD IN PLACE FELL STRIKING INJURED EMPLOYEE IN THE ARM.

EMPLOYEE WAS GUIDING A CRIBBING BLOCK WHEN HIS FINGER WAS CAUGHT BETWEEN THE BLOCK & A HANDRAIL A MOBILE CRANE WAS BEING USED TO LIFT THE BLOCKS INTO POSITION FINGER WAS LACERATED

INJURED STUCK HIS FINGER INT EH HYDRAULIC HOSE TO CHECK FOR A LEAK. HE TURNED THE HOSE ON AND IT JERKED SLAPPING HIS FINGER AGAINST THE CAB OF THE DRILL AND BRUISED IT.

EE UNKNOWINGLY DISCONNECTED A PRESSURIZED AIR LINE AT A CHICAGO COUPLING. FOREIGN MATERIAL WAS BLOWN IN TO THE SKIN OF BOTH FOREARMS.

KILN BACK STOP NOT WORKING ENGINE CLUTCH TO RUN AT HIGH RPM IN REVERSE IT STRUCK CASING PC OF IT HIT EMP

EMPLOYEE WAS USING AN OXYACETYLENE UNIT AND RECEIVED 2ND DEGREE BURNS WHEN THE FLAME OF THE TORCH BURNED THE BACK OF HIS HAND DUE TO A DEFECTIVE GLOVE HE WAS WEARING.

EMPL USING PRTABLE GRINDER.AIR MOVEMENT CREATED BY A CODING FAN CAUSED SMALL PIECE OF METAL TO ENTER EYE EVEN THOUGH WEARING A SHIELD.DELAY IN REPORTING THIS DUE TO PROBLEMS CONTACTING TREATIN G DR THEN CONFERENCE WITH MSHA DIST SUPV.

HE WAS LIFTING A BRICK ONTO THE BRICK ARCH. PLUNGER LOST AIR AND BRICK CAME DOWN ON FINGER.

OXYACETYLENE TORCH WAS KNOCKED FROM INJURED EMPLOYEE'S HAND AS BUCKET ELEVATOR WAS BEING REPAIRED. TORCH FLAME CAUSED 2ND DEGREE BURN TO EMPLOYEE'S LEG.

HE WAS DRILLING PIECE OF ANGLE IRON WHEN IT FELL & STRUCK HIM ON LEFT KNEE.

THE INJURED EMPLOYEE WAS OPERATING A DRILL PRESS AND HOLDING A FLANGE, WHICH HE WAS DRILLING, WITH HIS LEFT HAND. WHILE DRILLING ONE OF THE HOLES IN THE FLANGE, THE BIT JAMMED CAUSING THE WORK TO SPIN CATCHING THE EMPLOYEE'S GLOVE AND INJURING HIS FINGER.

EMPL WAS GUIDING BOOM OF DERRICK IN PLACE DURING REPAIR. BOOM FELL OFF LOWER ANGLES CATCHING RIGHT RING FINGER BETWEEN TWO UPPER ANGLES. NAIL BED LACERATION ON RING FINGER RIGHT HAND. SURGERY ON 6/3.

A SAFETY SWITCH PREVIOUSLY INSTALLED TO ALLOW DRILL PRESS OPER TO START OR STOP DRILL BY PRESSING KNEE AGAINST SWITCH LOCATED BELOW DRILL.INJ WAS REMOVING A BIT FROM CHUCK AND KNEE HIT SWITCH WHICH TURNED CHUCK IN HIS HAND CUTTING IT.MEATY SECTION BETWEEN THUMB & FOREFINGER WAS CUT,REQ 3 STITCHES TO CLOSE.

EMPL WAS USING AN OXYGEN ACETYLENE UNIT TO BURN THROUGH A STEEL CABLE HE FAILED TO HOLD CABE AFTER BURNING THROUGH AND THE HOT END CAME IN CONTACT WITH HIS THIGH

POKING GYPSUM CHUNKS TO BREAK THEM UP. BIT FROM JACK HAMMER FELL OUT AND DOWN FROM ABOVE AND HIT EMPLOYEE ON ARM, CAUSING SWELLING.