Buscar en el registro

WHILE USING A 4" GRINDER TO CLEAN HANDRAIL, EMPLOYEE LOST CONTROL OF GRINDER. THE WHEEL CUT THROUGH HIS GLOVE CAUSING A HALF-INCH LACERATION ON HIS RIGHT HAND BETWEEN THE THUMB AND FOREFINGER. GRINDER WAS PROPERLY GUARDED, SWITCH WAS OF NON-LOCKING TYPE.

OPERATOR HAD ATTEMPTED TO POSITION DRILL OVER ROCK WHERE HOLE WAS LAID OUT; HE TRIED A DIFFERENT APPROACH THAT INVOLVED SLOPED TERRAIN. AT THIS TIME, THE DRILL TIPPED OVER TO CURB (RT. HAND) SIDE WITH OPERATOR IN CAB. IMPACT OF CRASH THREW OPERATOR AGAINST INSIDE OF CAB.

EE WAS ATTEMPTING TO SET A CONCRTERWEIGHT ON A CONTRACTORS BACKHOE. WHILE IN THE PROCESS THE CRANE TIPPED. THE EE HAD THE CRANE IN THE TRAVEL POSITION WHICH OVERRIDES THE SAFETY DEVICES ON TH E MACHINE. ALSO THE CRANE WAS SET UP ON UNLEVEL GROUND AT AN UNLEVEL POSITION. THIS ACCIDENT CAUSED THE EE TO EE HIS WRIST.

PUMP ACTIVATED WHILE FINGER WAS INSIDE PUMP.

EE HAD RIG RUNNING, WARMING UP (IT WAS 26 DEGREES), WHILE HE GOT HIS TOOLS OUT OF RIG TOOL BOX. OBJECT CAME OUT OF BELL HOUSING/COUPLING AREA & STRUCK HIM ON THE HARD HAT. ALL BOLTS & COUPLING S WERE CHECKED-NO DEFECTS. GROUNDS WERE SEARCHED, NO BOLTS, SOCKETS FOUND. RIGH WAS STEAM CLEANED. VERY COL ALL WEEKEND-COULD HAVE BEEN ICE.

EMPLOYEE WAS WELDING CUTTING EDGE ON 980 LOADER. EDGE FELL OFF BUCKET AND LANDED ON HIS RIGHT FOOT.

WHILE ATTEMPTING TO REMOVE ROD AND REPLACE IT BETWEEN TWO COUPLINGS EE BROUGHT THE TWO COUPLINGS TOGETHER BY HAND CONTROL. HE MISJUDGED DISTANCE AND SMASHED FINGERS OF LEFT HAND.

CHANGING DUMP CYCLINDER ON HITACHI EX 1100, WHILE ANOTHER CONTRACTOR WAS INSTALLING A TOOTH SHANK ADAPTER WITH A WIRE WELDER. EE RECEIVED PERRIFRIAL WELD BURNS TO BOTH EYES.

EMPLOYEE WAS WASHING CRUSHER PAD WITH HOSE. WATER STREAM STRUCK BEAM AND SPRAYED BACK IN HIS BACK. GETTING ROCK DUST INTO EYE. HE WAS WEARING SAFETY GLASSES.

EE WAS GRINDING PIECE OF WEAR METAL. SMALL FRAGMENT WENT UNDERSAFETY GLASSES AND ENTERED RIGHT EYE.

LIFTING 4" WATER LINE WITH CRANE PIPE SLIPPED CUTTING EMPLOYEES LEFT LEG.

OPERATING HAND HELD ELECTRIC GRINDER - GRINDER KICKED BACK & CUT HAND.

CORNEAL ABRASION - WELD SPLATTER WENT U;NDER HELMET & INTO LEFT EYE.

EE WAS USING A PORTABLE GRINDER ON A CRUSHER BONNET. THE GRINDER WAS IN AN ACUTE ANGLE AND IT SLIPPED AND CUT THE EE KNEE.

EMPLOYEE WAS USING A CUTTING TORCH TO CUT METAL. A HOT PIECE GOT INTO THE MAN'S EYE. HE WAS WEARING SAFETY GLASSES INSTEAD OF CUTTING GOGGLES.

EMPLOYEE WAS HOLDING A PIECE OF METAL WHILE ANOTEHR WORKER WELDED IT. A PIECE OF SLAG FELL INTO THE EMPLOYEES GLOVE AND BURNED THE BACK OF HIS HAND.

EE WAS USING A CUTTING TORCH TO CUT A PATCH FOR A SCREENING UNIT. HE SAID THAT WHEN HE LIGHTED THE TORCH OF FLASH OF FIRE CAME FROM AROUND THE HANDLE AND BURNED HIS RT FOREARM.

EMPLOYEE WAS USING A STEAM CLEANER TO CLEAN EQUPMENT. THE HANDLE SLIPPED OUT OF HIS HAND AND SPRAYED HIS ANKLE WITH HOT WATER AND STEAM.

EMPLOYEE WAS WALKING NEXT TO A HYDRAULIC ROCK BREAKER CRAWLER TRACK MACHINE A PIECE OF METAL BROKE OFF THE MACHINES TRACK & HIT HIM IN THE ARM IT CAUSED A PUNCTURE WOUND & THE PIECE OF METAL W AS REMOVED BY THE DOC

EMPLOYEE WAS ATTEMPTING TO REPLACE MASTER CHAIN LINK UNDER DRILL HAMMER THAT WAS BLOCKED UP ABOUT 4 INCHES ONE BLOCK MOVED ALLOWING HAMMER TO DROP PINCHING TIP OF EMPLOYEES FINGER

EMPLOYEE WAS MOVING CRANE INTO QUARRY ON 10-12 DEGREE OF SLOPE HAULAGE RD. HE ATTEMPTED TO DOWNSHIFT FROM HIGH GEAR TO LOW GEAR AND DID NOT COME TO A STOP BEFORE SHIFTING. THE VEHICLE SHIFTED INTO NEUTRAL AND THE BRAKES WOULD NOT HOLD THE MACHINE DUE TO FORWARD MOMENTUM. THE EMPLOYEE JUMPED OFF THE MACHINE AND INJURED HIS FOOT.

EE WAS CLEANING OUT THE AIR CONDITIONER FILTER WITH THE AIR CONDITIONER RUNNING HIS FINGER CONTACTED THE FAN AND CUT HIS FINGER.

EMPLOYEE WAS WELDING ON A FEEDER BOX & SUFFERED FLASH BURNS WELDING APPARENTLY DUE TO A DEFECTIVE LENS IN HIS WELDING SHIELD

EMPLOYEE WAS USING A ONE INCH AIR WRENCH TO TIGHTEN BOLTS ON A CRUSHER THE HOSE CAME LOOST & STRUCK THE MAN BELOW HIS LEFT EYE A LACERATION HAD TO BE CLOSED WITH 4 SUTURES

EMPLOYEE WAS USING A WEDGE AT THE JAW CRUSHER THE ROCK BREAKER WAS OPERATIONAL BUT WOULD NOT REACH THIS WEDGED ROCK.ANOTHER ROCK FELL ON THE WEDGE AND FORCED IT DOWN.THE EMPLOYEE HELD ONTO THE WEDGE AND THIS CAUSED A LUMBAR STRAIN.

EMPL WAS USING CUTTING TORCH AT WORK EMPL WAS USING CUTTING GOGGLES THAT WERE TYPE THAT COVERED EACH EYE & WERE ATTACHED IN MIDDLE BY CORD PIECE OF METAL GOT BETWEEN EMPLS GOGGLE & CAUSED ABRA SION TO RIGHT EYE.

USING POWER SAW IN BLDG EYE BEGAN TO BOTHER HMM AFTER LEAVING WORK, DR REMOVED WOOD SPLINTER FROM EYE

EMPLOYEE WAS USING A PORTABLE GRINDER. THE GRINDER KICKED BACK AND HIT THE EMPLOYEE ON HIS LEFT HAND. HE HAD SUTURES APPLIED TO CLOSE THE WOUND.

CHIPPING NEW WE5DED WELD AND PIECE OF METAL CAME LOOSE AND HIT HIM IN RIGHT EYE.