Buscar en el registro

EMPLOYEE NOTICED THAT THE TORCH LINE HAD A FLAME IN IT. HE REACHED TO EXTINGUISH IT AND THE LINE POPPED CAUSING THE FLAME TO BURN THROUGH HIS GLOVE.

WHILE GRINDING THE BIN WALL, DIRT & METAL PARTICLE LODGED IN EE'S LEFT EYE. EYE PROTECTION WAS BEING WORN, BUT THE PARTICLE ENTERED FROM THE SIDES. EE FELT DISCOMFORT THE NEXT DAY & WENT TO HI S PERSONAL PHYSICIAN.

EMPLOYEE CAUGHT HIS LEFT FOOTBETWEEN THE CARROUSEL & BAR WHILE STANDING ONTHE MAST TABLE SO HE COULD REACHTHE BARS MOREEASILY ON AN 11 DEGREE ANGLE HOLE

WHILE CLEANING A ZINC POUR HOLE IN JAW MAIN FRAME WITH TORCH, FOREIGN OBJECT FLEW PAST PROTECTIVE SHIELD AND INTO EE S EYE.

EE WAS LIGHTING CUTTING TORCH AND EXPLOSION RESULTED FR4OM ACETYLENE IGNITED BACK THROUGH THE HOSE.

EE USED A CHIPPING HAMMER AS A PRY BAR TO ALIGN A SKIRT BOARD THE HAMMER SLIPPED STRIKING HIS BOTTOM LIP

WHILE GRINDING PIECE OF STEEL WHEEL BOUND ON STEEL CAUSING GRINDER TO FLIP OVER STRIKING HAND STITCHES REQUIRED

WHILE DRILLING HOLES IN CENTER PLATES ON SCREEN THE BIT BOUND UP CAUSING THE DRILL TO JERK AROUND.

EMPLOYEE CAUGHT HIS FINGERS IN A SHEAVE ON THE CRANE OVER THE PRIMARY CRUSHER WHILE PULLING ON THE CABLES TO LINE UP THE HOOK.

WHILE GRINDING ON TABLE BUSHING ON DRILL WITH SMALL AIR GRINDER AND 2 INCH DIA X 1/2 INCH 1/4 INCH SHANK GRINDING WHEEL WHEEL BROKE APART AND STRUCK EE IN LEFT EYE.

INJURED WAS LYING ON RIGHT SIDE GRINDING LOWER EDGE OF SPIDER FOR 42-65 CRUSHER WHEN GRINDER WHEEL STRUCK CRIBBING AND WHEEL SHATTERED AND STRUCK RIGHT SIDE OF FACE CAUSING LACERATION.

INJURED WAS WORKING AT 42-65 PRIMARY AND DURING THE COURSE OF HIS DUTIES HE FELT DISCOMFORT IN HIS LEFT EYE. SMALL PIECES OF STEEL IN EYE.

WHILE WELDING A PIECE OF HOT SLAG GOT INTO GLOVE AND BURNED HIS HAND. EE RECEIVED 2ND AND 3 RD DEGREE BURNS TO RIGHT HAND.

WHEN DOWN INSIDE JAW CRUSHER WELDING, LOOSE STONE FELL OFF FEEDER ABOVE AND STRUCK INJURED ON BACK OF HEAD.

WHILE CUTTING A LARGE PIN ON LOADER, THE ROD BLEW OUT ON THE SIDE AND BURNED THROUGH GLOVE.

HOISTING DRILL STEEL ON DRILL HE CAUGHT FINGERS IN WINCH CABLE .

WHILE PICKING OUT STONE FROM JAW CRUSHER, STONE FROM ABOVE ON FEEDER BELT LOOSENED AND SLID ON TO HIM.

HIS EYE BECAME SWOLLEN AND PAINFUL. I,NAME WAS HELPING A WELDER INSTALL DECK PATCH AND WAS EXPOSTED TO WELDING ARC.

I,NAME WAS REPLACING A SNUB PULLEY WRAPPER ON RC 4 CONVYEOR AND RECEIVED A WELDING FLASH.

WHILE STEAM CLEANING COMPRESSOR, I.NAME SLIPPED AND HIT HIS FACE WITH STEAM CLEANER NOZZLE AND STEAM SOLUTION.

WHILE CUTTING PLATE & TORCH SPIT BACK SLAG AT EMPL.

BLOW HOSE COME OUT OF HOLE AND HIT INJURED IN MOUTH, REQUIRING 4 SITICHES ON INNER SIDE OF LOWER LIP OF MOUTH.

WHILE HE WAS USING CUTTING TORCH, HOT METAL FELL INTO HIS BOOT, BURNING BOTTOM OF RIGHT FOOT.

WHILE JACK HAMMERING PAVEMENT IN MILL HAMMER BOUNCED THROWING HAND ONTO UNDERSIDE OF CONVEYOR.

HEAVY COUPLING FELL FROM DRILL HAMMER AND STRUCK RIGHT HAND WHICH WAS RESTING ON CONTROL LEVER. EMPLOYEE CARELESSNESS.

WHILE ADJUSTING3THROTTLE ON PORTABLE WELDING UNIT, HAND SLIPPED AND STRUCK RADIATOR FAN.

HOSE ON SAFETY 9ELIEF VALVE OF IR 1400 COMPRESSOR #508144 HIT I.NAME IN FACE NOTE LOST TIME EFFECTIVE 102987 RETURNED TO WORK 110387 OUT AGAIN 110987

TOWING LINE FRO4 TUG SLIPPED OVER TOP OF BIT STRIKING I.NAME ON DECK ON SIDE OF LEFT KNEE

I.NAME STRUCK LEFT LEG WITH A HAND HELD DISC GRINDER.

I NAME STRUCK ON RIGHT HEEL BY TREE WHILE CUTTING TREES FOR QUARRY CLEANING.

WHEN DRILLING OUT BROKEN BOLT OVERHEAD DRILL STUCK AND TWISTED CAUSING NECK STRAIN I NAME HAS DEVELOPED NERVE PROBLEMS IN NECK LOST TIME STARTED 8 28 84