Buscar en el registro

The employee was grinding on a steel plate. Had all PPE on for the required work, EE stopped grinding, removed EE's PPE and wiped EE's forehead with EE's sleeved arm and the steel speck must have entered EE's right eye at that point.

An operator assisting an EE Agg Delivery Driver was straightening the tailgate of his Highway Dump Truck. EE was holding 4"x4" wood block with his gloved left hand against the tailgate, when the operator applied pressure with the 330 excavator' s bucket, the block rolled, pinching EE's left thumb between the block and the bucket requiring removal of the thumb nail and 3 stitches.

Affected employee was operating a dozer during his shift. He complained of back pain but indicated that no particular incident had occurred causing this pain but thought it was from operating the dozer. The employee was taken for medical observation where it was determined that he had a strain to the lower back. He was placed on modified duty.

Operator was operating excavator with door open. He was sorting large boulders when he dropped a boulder on the pile and a chip flew in the cab through the open door striking him in the left eye. Operator was not wearing safety glasses. He was examined by an optometrist, given prescription eye drops and sent back to full duty.

TAKING OUT AUGER SHAFT-USING CRANE & CHAIN RIGGING. RIGGED CHAIN AROUND SHAFT ON 1 END, OTHER END HAD CHAIN AROUND AUGER FLIGHT. EE HAD HIS HAND WRAPPED AROUND CHAIN, CHAIN SLIPPED OFF FLIGHT PINNING LT HAND AGAINST AUGER HOUSING & CHAIN. THE CRANE HAD TENSION ON SO WHEN IT SLIPPED IT PINNED EE'S 2 FINGERS. THEN CRANE PULLED UP ON CHAIN LACERATING FINGERS.

WHILE GRINDING METAL FILING FLEW PAST SAFETY GLASSES & WENT INTO RIGHT EYE

WELDING ON PORTABLE CRUSHER 2 WELDERS IN CLOSE QUARTERS AND FLASH CAME FROM BEHIND. FLASH IRRITATION OF EYES DOCTOR GAVE 2 DAYS OF EYE DROPS NO TIME LOSS OR RESTRICTION.

GRINDING SLAG FROM PIECE OF ANGLE IRON. OBJECT HIT LEFT EYE. GLASSES WERE BEING WORN AT THE TIMEOF THE INJURY. WAS NOT REPORTED BECAUSE WORKER THOUGHT IRRITATION WAS FROM WELDING AIR ARC FLASH . WAS REPORTED TO FOREMAN 2-1-01. WORKER THOUGHTIT WAS JUST A FLASH.

INJURED WRIST OPENING A STUCK WINDOW.

OPERATING D10 DOZER

WAS USING AN ELECTRIC GRINDER TO GRIND A SCREEN SHAFT. HE GOT A PIECE OF METAL IN HIS EYE.

WHILE DRILLING STEEL, BUT CAUGHT TWISTING WRIST

WHILE RUNNING A POWER GRINDER IN THE SHOP, HE GOT SOME METAL IN HIS LEFT EYE. HE WAS WEARING A WELDING HOOD.

RUNNING A 992 LOADER ON EXCAVATION. BANK CAVED IN BURYING LOADER. CAVED IN FRONT WINDOWS BURYING EE AGAINST CAB.

WHILE ASSISTING ANOTHER EMPLOYEE TO WELD AND CLEAN CLAY FROM UNDER A 4X4 CRUSHER, EMPLOYEE GOT DEBRIS IN HIS EYES.

EE WAS REPAIRING 4 1/4 CRUSHER WIUTH A CUTTING TORCH WHEN A HOT PIECE OF SLAG TOUCHED EE'S COAT CAUSING A BURN ON HIS ARM.

DRILLING BOLT WHEN METAL FRAGMENT ENERTERED EYE CAUSING IRRATATION. EE WAS WEARING SAFETLY GLASSES AT THE TIME

EE WAS PERFORMING A PRESHIFT INSPECTION OF A BACKHOE, WHEN A ROCK SHOT OUT OF 5/2 CRUSHER & STRUCK HIS EYE. THE EE WAS NOT WEARING SAFETY GLASSES AT THE TIME. HE SUFFERED FROM A LARGE ABRASION ON HIS LEFT EYE.

EE WAS WELDING WITH WORK GLOVES. A HOT SPARK GOT IN SLEEVE. BURN TO ELBOW, IT BECAME INFECTED.

THE EMPLOYEE WAS ATTEMPTING TO CUT A BOLT OFF WITH A TORCH WHEN HOT METAL ENTERED EMPLLOYEES LEFT EYE. THE EMPLOYEE SUFFERED FORM A SCRATCH ON HIS LEFT EYE AND EYE IRRITATION.

WHILE LOWERING A GEAR BOX, THE LOAD WAS TOP HEAVY CAUSING THE GEAR BOX TO GO OVER CENTER ALL FALL OF THE HOOK.

GRINDING FORKLIFT KING PIN HOUSING CLEANING SURFACES WITH CUTTING TORCH & GRINDING WITH 4IN GRINDER WITH SAFETY GOGGLES SMALL PIECE OF METAL IN LEFT EYE WAS A RESULT

EMPLOYEE WAS WORKING OUTSIDE WITH PORT POWER ANDWAS STRUCK WITH A BEAM CAUSING HIM TO FALL ON RIGHT LEG.

EE RELEASED EXCESS HAULBACK LINE AND TO GET OUT OF THE WASY, HE MOVED HIS HEAD QUICKLY AND HIT HEAD HARD ON MACHINE.

CUTTING PIPE ON BOTTOM SIDE WITH TORCH PIECE OF HOT SLAG FELL IN EAR.

MOVING GRINDER FROM TOP OF TUNNEL AND TRIGGER HIT EDGE OF STEEL GRINDER JUMPED HIT R WRIST

WORKMAN WAS REMOVING COUPLING HUB WITH HYD PULLER & CUT FINGER.

CUTTING METAL A PIECE OF SLAG GOT INTO EYE BETRWEEN NOSE & SAFE TY GLASSES

CUTTING A CONVEYOR FROM ITS SUPPORTS.HE WAS OFF THE GROUND AND HAD HIS HEAD TURNED TO SEE HIS WORK,HOT SLAG ENTERED HIS EAR.

EMPLOYEE WAS GRINDING OUT STEEL SPARKS FLEW IN BEHIND HIS SAFETY GLASSES INJURING EYE.

EMPL GRINDING 10"PIPE WITH 7"HORIZ GRINDER.GRINDER KICKED BACK CUTTING EMPL WRIST.

WAS WORKING ON CONVEYOR BELT INSHOP WHEN HE GOT UP HIS HIP AND BACK WERE STIFF

EMPL GRINDING OUT CRACK ON PUMP HOUSING TO WELD.OBJECT FLEW FROM GRINDER AND GOT INTO EYE.