Buscar en el registro

Employee was using an etching tool when a metal fragment entered the eye. The item was removed and medication for the eye was prescribed. They received a full release to work.

Individual opperating D9T, track slid into a depression, operator was shaken in his seat causing a neck strain

The employee was injured on the 22nd of May and reported the accident on the 24 of May. The employee was taken to the clinic where a piece of metal was removed from his eye.

During the process of pulling a core barrel out of a 60 degree angle hole, driller lowered the head and employee's left index finger was pinched between the head and rail on the drill mast resulting in an open fracture to the tip of employee's finger.

Employee was working in a tight area grinding bad concrete on a wall with a 4" grinder. It had "bucked" back at him several times and the lead man had reinstructed him to not apply so much pressure. When he put the grinder back on the surface he applied so much pressure it broke the blade and kicked back into his left lower leg causing a laceration.

Per the operator's report the dozer was backing up and ran over a rock causing the operator to be "jarred" This incident was not reported until March 4th , which is in violation of our policy. We have reasonable doubt that this injury occured on our property. We will be forwarding more information in order to have this incident receive MSHA's "Category 10" designation.

Employee was stepping over a support and grabbed the handrail that he was heated up for support. He was repairing handrail and had removed his glove to put hearing protection on to use a hammer to put handrail back in place

Employee was placing the dishcarge trunion bearing into place on Mill #6. He was trying to remove a piece of cribbing when the cribbing shifted pinching fingers on his right hand between the cribbing (wood) and the casing on the mill. Resulted in laceration and partial amputation of mid and ring fingers of right hand.

Operator position in equipment. Muscle strain.

Employee states while pushing pipe that was being swung by boom crane, his left hand became entrapped between rig and pipe

EE WAS WATCHING A STAINLESS STEEL PUMP IMPELLER WHEN HE FELT A FOREIGN BODY IN HIS LEFT EYE. NO DAMAGE OR IMPAIRMENT.

EE WAS WORKING ONTO THE 3440 LEVEL HE WAS DRILLING WHEN THE ROCK ROLLED HITTING HIM THE LEFT ANKLE. HE SUSTAINED A CONTUSITON/SPRIAN LEFT FOOT/ANKLE & WAS RELEASED TO RESTRICTED DUTY Y

EMPLOYEE WAS WORKING ON THE 3440 LEVEL. HE WA CUTTING A 2X12 WITH A CIRCULAR SAW WHEN IT CAUGHT HIS LEFT HAND. HE SUSTAINED AN AMPUTATION OF THE LEFT MIDDLE FINGER AND MULTIPLE LACERATIONS T O THE LEFT INDEX, RING AND LITTLE FINGER, WHICH REQUIRED SURGERY TO REPAIR. HE IS A LOST TIME IN INJURY.

EE WAS WORKING ON THE 2950 LEVEL (CAR SHOP). HE WAS HOLDING A CAR AXLE WHILE MOVING IT WITH THE CRANE. THE AXLE SLIPPED IN THE HOOK AND HIS FINGER WAS CAUGHT BETWEEN THE HOOK AND THE WHEEL. HE SUSTAINED A FRACTURE, RIGHT INDEX FINGER, AND WAS RELEASED TO RESTRICTED DUTY.

EMPLOYEE WAS WORKING ON THE SURFACE 3D CHIPPY. THE 2 1/2" WIRE ROPE FOR 3D MAIN, #2 SIDE, WAS BEING FED FROM THE SUPPLIERS WOODEN SPOOD, INTO SERVICE ON THE HOIST DRUM. THE TAIL END OF HIS 2 1 /2 ' ROPE WAS ATTACHED, ALLOWING 11" OF FREE ROPE. AS THE SPOOL EMPTIED, THIS 11' TAIL OF FREE ROPE WHIPPED AROUND AND STRUCK THE EMPLOYEE ON THE LEFT SIDE OF THE TOP OF HIS HEAD. HE SUSTAINE

EE WAS WORKING ON THE 2615 LEVEL. HE WAS DRAWING ORE WHEN A CONCRETE SLAB CAME THRU THE DRAWPOINT WITH A PIECE OF REBAR PROTRUDING, STRIKING HIM ON THE RIGHT UPPER LEG(ABOVE THE KNEE). HE SUST AINED A LARGE FLAP TYPE LACERATION, 14CM X 11CM, WHICH REQUIRED NUMEROUS STITCHES AND WAS TAKEN OFF THE JOB.

EMPLOYEE WAS GRINDING WITH A PNEUMATIC GRINDER WHEN A FOREIGN OBJECT FLEW INTO HIS LEFT EYE. THE EMPLOYEE WAS TREATED AND RELASED FOR WORK. HE WAS GIVEN A PRESCRIPTION FOR NEOSPORIN.

EE WAS WORKING ON THE 2615 LEVEL, P-30, L-13, STRIPPING RAISE TOPS. WHEN HE TRIED TO HOIST AN 8' 3"X6" OUT OF THE RAISE, IT CAME BACK DOWN & PINCHED HIS FINGER AGAINST ANOTHER 3"X6". HE SUSTAI NED A CONTUSION & FRACTURE TO THE RIGHT MIDDLE FINGER. HE IS ON RESTRICTED DUTY.

EE WAS WORKING ON THE 2675 LEVEL, P30B, L18, RELIEVING BACK LAGGING WITH A CHAIN SAW. THE CHAIN SAW BACK-LASHED, CUTTING HIS LEFT FOREARM. HE SUSTAINED A 7.5 CM LACERATION TO HIS MID LEFT FORE ARM. EE WAS PLACED ON RESTRICTED DUTY.

EMPLOYEE WAS WORKING ON THE 2950 LEVEL, CAR SHOP. HE WAS IN THE PIT WITH THE CAR LIFTED UP CHECKING THE WHEEL TO SEE IF IT WAS LOOSE WHEN THE FLOOR CYLINDER CAME DOWN ON HIS THUMB. EMPLOYEE SU STAINED A FRACTURE TO THE LEFT THUMB AND LACERATIONS.

EMPLOYEE WAS WORKING ON THE 2615 LEVEL. HE WAS COLLARING A HOLE WHEN THE MACHINE GOT AWAY FROM HIM. HE TRIED TO HOLD IT BACK WHEN HE FELT A POP IN HIS GROIN AREA. HE WAS DIAGNOSED WITH A PO SSIBLE LEFT INGUINAL HERNIA AND WAS PUT ON RESTRICTED DUTY UNTIL HE WAS SEEN BY A SPECIALIST.

EMPLOYEE WAS WORKING ON THE 3570 LEVEL. HE WAS DRILLING RAISE STATIONS FROM BENEATH CONCRETE DRIFT. SOME BACK LAGGING STARTED TO BREAK WHERE HE DRILLING THE BACK. HE JUMPED OFF HIS JUMBO, LAND ING AWKWARDLY.. HE SUSTAINED A SPRAIN/STRAIN INJURY TO HIS RIGHT ANKLE AND RELEASED TO RESTRICTED DUTY.

EMPLOYEE WAS WORKING ON THE 2615 LEVEL INSTALLING SPLIT SETS. HE CAUGHT HIS FINGER BETWEEN THE JACKLEG AND THE SADDLE-BOLT CAUSING A LACERATION WHICH REQUIRED SUTURES.

EE WAS LEANING AGAINST A TABLE WHILE WORKING, HIS THIGH WAS PINCHED BETWEEN 2 PIECES OF METAL.

EE WAS STANDING ON THE SHOTCRETE HOSE WHILE BLOWING THE RABBIT THROUGH IT. THE HOSE BUCKED AND EE FELL.

EE WAS WORKING ON THE 2675 LEVEL USING A BLOWPIPE TO BLOW THE LOOSE MATERIAL FROM AROUND A HANGUP IN THE RAISE. THE HANGUP CAME DOWN SUDDENLY AND DROVE THE BLOWPIPE BACK AND IT STRUCK HIM ALON G SIDE OF HIS JAW. HE WAS DIAGNOSED WITH 3 FRACTURED TEETH AND REFERRED TO A DENTIST AND TAKEN OFF THE JOB.

EE WAS WORKIING ON THE 2615 LEVEL RUNNING A TUGGER ON A CONCRETE MACHINE WHEN HE CAUGHT HIS HAND BETWEEN THE MACHINE AND THE TUGGER HANDLE. THIS INCIDENT RESULTED IN A 6CM LACERATION, RT HAND, REQUIRING SUTURES. HE RETURNED TO SMHCC ON 3/22 FOR A FOLLOW-UP APPOINTMENT AND WAS RELEASED FOR RESTRICTED DUTY WORK.

EE WAS OPERATING A JACKLEG MACHINE, COLLARING A HOLE. THE MACHINE STARTED TO FALL FORWARD & HE REACHED OUT & GRABBED IT. HIS GLOVE BECAME ENTANGLED IN THE DRILL STEEL CAUSING HIM TO TWIST HIS WRIST AS THE DRILL STEEL ROTATED. HE WAS SEEN INTHE DISPENSARY, BUT CONTINUED WORKING. ON 3/10/97 HE SOUGHT TREATMENT AT THE SMHCC WHEN THE CONDITION WORSENED. FRACTURE,L WRIST, RESTRICTED DUT

EE WAS MAKING CHISELS AT THE PNEMATIC HAMMER. HE WAS IN THE PROCESS OF PLACING A SPACER BAR BETWEEN THE BASE & THE HAMMER PLATE WHEN HE INADVERTENTLY STEPPED ON THE AIR PEDAL CAUSING IT TO ACT IVATE. THE FIRST DIGIT OF HIS RIGHT INDEX FINGER WAS STRUCK BY THE HAMMER & IMMEDIATELY SEVERED AT THE FIRST JOINT. EE WAS TAKEN OFF THE JOB FOR SURGERY.

EE WAS WALKING PAST THE DRILL PRESS IN THE SURFACE MACHINE SHOP, WHEN A DRILL BIT THAT HAD BROKEN WHILE ANOTHER EE WAS USING THE DRILL PRESS HIT HIM ON THE FOREHEAD. THIS RESULTED IN A LACERAT ION, RIGHT EYEBROW, REQUIRING 3 SUTURES.

EE WAS WORKING ON THE 2675 LEVEL INSTALLING A FEED MOTOR. HE HIT HIS RIGHT ELBOW AGAINST THE SHELL OF THE FACE DRILL. LATER, HE BUMPED IT AGAINS A [...] FLAT. HE WAS SEEN IN THE DISPENSARY & C ONTINUED WORKING. ON 2/14/97 HE SOUGHT TREATMENT AT THE SMHCC, DIAGNOSED WITH STRAIN, RIGHT ELBOW & RELEASED TO RESTRICTED DUTY.

EE LACERATED HIS RIGHT KNEE WHILE USING A GRINDER. THELACERATION REQUIRED THREE SUTURES. EE REUTRNED TO WORK THAT DAY.

WHILE REMOVING DRILL ROD FORM MACHINE, UPPER WRENCH BROKE AND CAME OUT STRIKING EMPLYEE'S LEFT FOOT.

EE WAS DRILLING WHEN HE CAUGHT HIS FINGER BETWEEN THE MACHINE & THE CRIBBING. THIS INCIDENT RESULTED IN A TIP FRACTURE, LIFT LITTLE FINGER.

EE WAS DRILLING WHEN HE CAUGHT HIS THUMB BETWEEN THE STEEL HOLDER & THE STEEL. THIS INCIDENT RESULTED IN A LACERATION, RIGHT THUMB, REQUIRING 5 SUTURES.

EE WAS DRILLING WHEN A ROCK FELL & HIT HIM ON THE HAND. THIS INCIDENT RESULTED IN LACERATION, RIGHT THUMB CAUSING EE TO LOSE TIME FROM WORK.

EE WAS PULLING A MACHINE OUT, LOST HIS BALANCE, THE MACHINE TIPPED FORWORD & PINCHED HIS LEFT MIDDLE FINGER. THIS INCIDENT RESULTED IN A [...] LACERATION, LEFT MIDDLE FINGER REQUIRING SUTURES. EE WAS RELEASED FOR WORK WITH RESTRICTIONS.

INJURED WAS DETRELIVING TOOLS FROM THE TRUCK ON THE OPPOSITE SIDE FROM OPERATOR. THE OPERATOR LOWERED THE OUTRIGGER WITHOUT ENSURING THAT ALL PERSONNEL WAS CLEAR OF THE EQUIPMENT.

EMPLOYEE WAS WELDING OVERHEAD WHEN A PIECE OF MUD FELL IN HIS LEFT EYE.

EE WAS DRILLING, BLEW OUT THE HOLES & WATER SPLASHED IN HIS EYES. THIS INCIDENT RESULTED IN ALKALI BURNS, RIGHT EYE. EE DID NOT SEEK TREATMENT AT THE CLINIC UNTIL 5/22/96 WHEN AT THAT TIME HE WAS TAKEN OFF THE JOB.

EMPLOYEE WAS IN THE DRIVE CHAMBER WORKING ON FORMS WHILE ANOTHER EMPLOYEE NEAR BY WAS DRILLING HOLES WITH AN AIRLANCE. WHEN THE AIRLANCE WAS TURNED ON, IT BLEW MUD UP IN EMP'S EYE.

EMPLOYEE STATES WHILE DRILLING AT MINESITE, PVC PIPE CONTAINING SULFURIC ACID WAS STRUCK. EE INHALED FUMES.

EMPLOYEE WAS STEAM CLEANING BRAKES OF #4 SHOVEL WHEN THE STEAM CLEANEER JAMMED. AS SHE ATTEMPTEDTO GET IT TO RELEASE SHE BROUGHT IT OVER HER LEFT FOOT. THE EMPLOYEES TOES AND UPPER FOOT WERE B URNED. EMP WAS NOT RELEASED TO WORK.

EE WAS PULLING CARS WITH A TUGGER WHEN THE LAST CAR WENT BY & A HOOK FLIPPED OFF & HIT HIM ON THE FACE. THIS INCIDENT RESULTED IN [...] LACERATION ON HIS FACE REQUIRING 7 SUTURES.

EE WAS DRILLING IN A RAISE WHEN A ROCK FELL FROM THE COLLER & STRUCK HIS LEFT MIDDLE FINGER. THIS INCIDENT RESULTED IN FRACTURE, LEFT MIDDLE FINGER.