Buscar en el registro

Operator was changing steel on drill when wrench spun back and hit EE's foot.

Picked plug drill strained back.

Employee was clearing debri and trees around transformer pole. He cut chain saw off, moved against his leg before chain had stopped spinning.

Employee was operating 90 ton truck crane. When lifting a block to lower the main fall, brake locked and would not release load. Block swung out past riggers on crane causing load to shift crane and caused a rocking motion. Operator jumped out of crane onto granite. This crane was being operated from bottom of quarry pit.

Employee was grinding on derrick swing shaft with 2 other ee for repairs when a piece of metal flew up under his glasses.

He was cutting aluminum air line & a piece of aluminum got into his eye. On 2-19-07 he said was still bothering him & went to Dr.

Drilling & rock dust came up & into eye. Had safety glasses on.

Exposed to large impact wrench while holding tire for support while operator working wrench and noise and air blew in left ear. Report due to audiogram on 9/12/05.

EE WAS USING A CHANNEL TORCH & HOT ROCK FLEW UP UNDER HIS GLASSES TO THE LEFT SIDE OF HIS NOSE AREA AT CORNER (INSIDE) OF EYE. WHEN HE REMOVED HIS GLASSES THE HOT ROCK MELTED TO FRAME & PULLED SKIN FROM NOSE OFF.

EMPLOYEE WAS DRILLING A LIFT HOLE IN GRANITE BLOCK WHEN PART OF IT SHEARED OFF CAUSING EMPLOYEE & ROCK TO FALL APPROX. 10'. EE HAD HIS SAFETY BELT ON WHICH KEPT HIM FROM HITTING THE BOTTOM.

DOGGING A HOLE WITH PLUG & DRILL WHEN DRILL SLIPPED & FELL STRIKING THE EMPLOYEE ON HIS RIGHT CALF.

Operator was operating crane with left hand when a lever popped back striking his hand causing a sprain.

EMPLOYEE THOUGHT THE MACHINE WAS SHUT OFF. WHEN HE UNJAMMED THE TIP IT STARTED UP CAUSING HIS LEFT RING FINGER TO BE PINCHED.

EE HOOKED A NOVAMAC DRILL UP WITH CHAINS IMPROPERLY AND WHEN DRILL WAS LIFTED IT SWUNG AROUND STRIKING HIM ON THE HEAD AND KNOCKING HIM TO HIS FEET.

WORKING A JACKHAMMER. HE PROPPED HIS HAND ON GRANITE WALL & LEANED JACKHAMMER OVER & IT LANDED ON HIS HAND THAT WAS PROPPED ON WALL.

EMPLOYEE WAS BLOWING OUT CHANNEL AND DUST AND DIRT BLEW INTO HIS EYE UNDER HIS SAFETY GLASSES. HURT ON 8/20/02; DIDN'T REPORT OR GO TO DOCTOR UNTIL 8/28/02.

DRILLING HOLE NEXT TO A GRANITE WALL WHEN DRILL SLIPPED MASHING FINGER AGAINST WALL.

HE DRILLS GRANITE WITH A JACKHAMMER AND STEEL. HE WAS SETTING UP STEEL AND SETTING JH DOWN ON STEEL AND MISSED RETAINER. THE JH SLIPPED AND STEEL BENT AND HIT HIM ON FOREHEAD.

HE WAS OPERATING A NOVAMAC DRILL AND HIS HAND GOT BETWEEN THE TRACK AND WALL OF QUARRY AND SMASHED THE TIP OF HIS FINGER.

HE WAS PUTTING IN A SNAKE HOLE IN GRANITE TO HOOK CHAIN THROUGH. THE BIT WENT THROUGH OUT THE END OF GRANITE(END OF GRANITE BROKE OFF) CAUSING HIM TO FALL. HIT HIS ARM ON GRANITE.

EMPLOYEE WAS LIGHTING A BURNER WHEN THE 02 HOSE BLEW OFF CAUSING A FLAME BURNING HIS HAND.

EE WAS BLOWING OUT A CHANNEL WITH AIR WHEN HOT ROCK WENT IN THE CHANNEL IGNITING LEFT OVER FUELIN THE CHANNEL COMING BACK ON HIM & BURNING HIS ARMS & FACE

EMPLOYEE WAS STANDING NEAR A FENCE WHILE FLAGGING. HIS HAND WAS ON FENCE, BLOCK AND TACKLE CAME LOOSE FROM CRANE. IT HIT THE FENCE HE WAS HOLDING ON TO. HE DID NOT LET GO OF THE FENCE. WHEN FE NCE GAVE, HIS THUMB WAS ON FENCE POST AND FINGERS STRETCHED AS THUMB WAS HOOKED ON POLE, STRETCHING AREA BETWEEN THUMB AND POINT FINGER CAUSING AREA TO TEAR.

WAS BOOMING WORKING PLATFORM UP & AWAY FROM WALLSTOPPED CHANGED THE CONTROLS TO SWING I SAW THAT BOOM WAS TRAVELING DOWN PULLED EMERGENCY STOP BUT BOOM WAS STILL COMING DOWN. YELLED FOR EVERYBODY TO WATCH OUT REACHED FOR 2ND BRAKE CRANE MOVED RIGHT I CHANGED DIRECTION BUT BY THAT TIME HOOK BLOCK WAS ON GROUND STRIKING INJ EE