Buscar en el registro

ATTEMPTING TO CLEAR A SANDBLASTER LINE. HAD TURNED OFF AIR SUPPLY, BUT POD WAS STILL UNDER PRESSURE BECAUSE OF PLUGGED LINE. PRESSURIZED AIR AND GRAVEL BLEW OUT ONTO EE'S HAND.

EE WAS GRINDING (WEARING FACE SHIELD & SAFETY GLASSES) FELT DUST IN HIS R EYE

HOT DUST WAS EXPELLED FROM PREHEATER, UNLATCHED PORT ABOVE ANALYZER PROBE. EMPLOYEE RECEIVED A BURN ON HIS FOREARM.

WHILE GRINDING ON BELL HOSUING A PIECE OF METAL FLEW OFF AND HIT HIM IN THE RIGHT EYE. THE EE ALLERGED HE WAS WEARING SAFETY GLASSES AT THE TIME BUT NOT A FACE SHIELD.

THE LAYER PUSHER OF THE PALLETIZER BECAME JAMMED. EE THREW MAIN DISCONNECT ON MACHINE, BUT HE DIDN'T THROW IT FAR ENOUGH NOR DID HE DO A PROPER LOCKOUT AND TEST OF THE MACHINE. WHEN HE WENT TO RELEASE THE JAM, THE MACHINE WAS STILL ENERGIZED AND WHEN IT BECAME UNJAMMED, IT CAUGHT BOTH LEGS BETWEEN THE LAYER PUSHER AND FRAME OF THE PALLETIZER.

WHILE EE WAS AIR LANCING WALL ON PREHEATER, DUST BLEW INTO HIS EYES. CORNEAL ABRASION REQUIRING PRESCRIPTION MEDICATION.

EE WAS CHANGING OUT A CEMENT LINE. PRESESURE FROM PUMP BLEW CEMENT INTO HIS EYES.

EE WAS REMOVING DRILL STEEL SU0PPORT FROM BEHIND DRILL STEEL. ROTARY HEAD NEAR TOP OF TRAVEL TOWER SWUNG AND PINNED EE'S ARM AGAINST TOWER.

PREHEATER WAS PLUGGED WITH HOT MATERIAL. AS EMPLOYEE APPROACHED MAN DOOR, LARGE PIECE OF MATERIL FELL CAUSING HOT MATTERIAL AND HOT AIR TO BLOW BACK THORUGH DOOR,WHICH HIT EMPLOYEE.

JACK HAMMER WAS STUCK, TRIED TO PULL IT OUT.

EE WALKED UNDER AREA OF TORCH CUTTING A 2" CHANNEL IRON STRUCK EE IN RIGHT SHOULDER AREA.

EE WAS CUTTING BOLTS FROM BEAMS WITH TORCH. BOLTWAS CUT LOOSE AND FELL INTO EE'S BOOT CAUSING BURN TO RIGHT ANKLE.

WHILE WELDING INTHE OVERHEAD POSITION, HOT SLAG DRIPPED DOWN SLEEVE OF WELDING JACKET AND ROLLEDDOWN INTO GLOVE, CUASING BURN

EE WAS SETTING UP A STACKER WHEEL AND ADJUSTING CHUCK TO DIAL. WHEEL FELL OUT OF CHUCK AND STRUCK EE'S LOWER RIGHT LEG, CAUSING A GASH IN THE LEG.

INJURED AND ANOTHER EMPLOYEE WERE WORKING WITH VACTOR TRUCK. HOSE BECAME PLUGGED. WHEN OBSTRUCTION WAS RELEASED, SUCTION DREW EMPLOYEE'S ARM INTO HOSE.

EMPLOYEE WAS TACKING PAD EYES TO ROTOR, DID NOT GET LENGS FULLY CLOSED WHEN HE STRUCK ARC.

EE PICKED UP ANOTHER EE'S CUTTING TORCH BY THE TIP END NOT REALIZING THE TORCH WAS STILL EXTREMELY HOT.

WHILE WELDING PATCH ON CEMENT LINE ON TOP OF SILO, EMPLOYEE FELT HOT SPLATTER ENTER LEFT EAR. (DOCTOR'S REPORT DID NOT INDICATE A FOREIGN BODY IN EAR. HOWEVER, THERE WAS A BURN.)

HYDRAULIC HOSE BROKE, SPEWING OIL ON GROUND. INDIVIDUAL SLIPPED ON OIL.

EMPLOYEE STATES HE WAS INSTALLING MILL LINERS WHEN HE RECEIVED A FLASH FROM WELDING EQUIPMENT BEING USED IN THE AREA.

EE WAS WORKING ON CUTTER ON SAMPLE SYSTEM. CUTTER CAUGHT LEFT RING AND LITTLE FINGERS IN CHAIN.

WHILE USING A WATER BLASTER THE EMPLOYEE WAS INJURED WHEN A SPRAY OF HIGH-PRESSURE WATER CAME OUT THROUGH A SMALL HOLE IN THE LANCE ADAPTER FITTING

INJURED WAS DRAINING COOLANT TANK, THE CREW WAS LOWERING A PUMP INTO THE TANK. THE PUMP GOT HUNG UP IN THE MAN HOLE. THE INJURED PUSHED ON THE HOOK BLOCK AND GOT HIS THUMB CAUGHT IN THE SHEAVE .

INJURED WAS BLOWING OFF WORK AREA WHEN DEBRIS FLEW IN HIS EYE NOTE DOC REMOVED FOREIGN OBJECT FROM INJUREDS EYE

WHILE CLEANING THE FEED SHELF THE PREHEATER PUFFED AND BLEW HOT MATERIAL ONTO INJURED. HOT MATERIAL RICOCHETTED OFF JACKET AND WENT UNDER FACE SHIELD.

WHILE DRIVING A STEEL SHIM WITH A PNEUMATIC TOOL INJURED'S HAND JAMMED THE END OF A SHIM.

WHILE CLEANING INSIDE OF A BALL MILL USING ACHIPPING GUN,A STEEL CHIP PENETRATED INJURED'S SHOULDER.

INJURED WAS CUTTING A STEEL PLATE WHICH SUPPORTED A THREE TON BRIDGE BEAM AS THE LAST CUT WAS MADE THE BEAM TOPPLED OVERPINNING HIM AGAINST A LARGE PIPE

INJ DISLODGING 1ALLET WHICH HAD JAMMED PALLETIZER.FAILED TO MECHANICALLY DISABLE APLLETIZER WHEH JAMMED PALLET WAS MOVED.STEEL STACKING FRAME RELEASED AND CAUGHT RIGHT LEG PINNING IT TO SUPPOR T STRUCTURE. 3

INJ USING STEAM3CLEANER TO CLEAN PICKUP TRUCK.LOST HIS GRIP ON WAND AND IT WHIPPED AROUND AND HIT HIM RIGHT EYE AND CRANIUM.

INJURED WAS USI3G A CUTTING TORCH TO CUT STEEL PLATE WHICH WAS SUPPORTED ON SAW HORSES AS HE CUT THROUGH THE END PIECE FELL ON HIS FOOT HITTING IT BEHIND THE STEEL TOE

INJ FREEING PNEUMATICALLY OPERATTED GATE VALVE.AIR NOT SHUT OFF AND VALVE ACTUATED PINCHING INJ HAND.

INJ WAS SUPERVISING REMOVAL OF ROTARY VALVE.HE REACHED INTO MECHANISM TO CONFIRM OPERATION OF VALVE-VALVE ACTIVATED WHILE HAND WAS INSIDE.

WHILE USING COMPRESSED AIR TO CLEAN AN ELECTRIC MOTOR DIRT BLEW INTO INJURED EYE

INJURED ATTEMPTED TO REPAIR A PNEUMATIC CYLINDER WITHOUT TURNING AIR OFF. CYLINDER ACTUATED AND INJURED HIS LEFT HAND.

WHILE USING JACK HAMMER, AIR COUPLING BROKE AND AIR LINE HIT INJURED\S RIGHT ARM.

WHILE DOING OVERHEAD WELDING HOT SLAG DROPPED ONTO LEFT KNEE

INJURED WAS USING GRINDING WHEEL IN WELDING SHOP WHEN HE FELT SHARP PAIN IN HIS EYE. HE WAS WEARING EYE PROTECTION.

USING PORTABLE DISC GRINDER.IT CUT WRIST OF RIGHT ARM.LOST CONTROL BECAUSE HE HELD GRINDER UPSIDE DOWN.

WHILE USING A HIGH PRESSURE AIR LINE, IT PULLED FREE ON THE COUPLING

WAS ATTEMSTING TO CUT A BANDING STRIP WHEN BAND SLIPPED AND BRUISE AGAINST SHARP EDGE OF BOARD.

INJURED WAS PINNED AGAINST AN ELEVATOR BY A MARLIN BRAKER ASSEMBLY.

INJ USED A WEED EATER TO CUT WEEDS NOT WEARING SAFETY GLASSES

INJ ATTEMPTED TO GRIND SHEET METAL ON A PEDESTAL GRINDER GAP BETWEEN GRINDING WHEEL WAS TO WIDE AND PULLED METAL FINGERS INTO GRINDER

INJ WAS CLEANING INSIDE OF CEMENT SILO DUST COLLECTOR WAS TURNED ON CREATING A DRAFT BLOWING CE

INJURED FINISHED 8-HOURS OF JACKHAMMER DUTY, WHEN HE NOTICED SHOOTING PAINS IN HIS RIGHT WRIST AND FOREARM.

USING A JACKHAMMER -...TAPPED HAMMER ON CONCRETE TO CORRECT PROBLEM.JACKHAMMER FELL ON EMPL FOOT BEHIND STEEL TOE.