Buscar en el registro

Worker was positioning 10-inch plastic pipe into a 412 Fusion machine to be fused to another piece of pipe. On doing so, EE pinched EE's left pinky finger between the pipe causing a fracture to EE's knuckle.

Dust was in the air after the use of a pneumatic air tool which caused irritation to the employee's right eye.

Service technician working on engine removal from a Skid Steer Loader and with impact gun on a fastener lacerated right middle finger while other hand was exposed to the other end of retainer.

Employee using a pedestal grinder in shop when EE's right thumb contacted the grinding wheel. Employee was treated at hospital and released.

Employee was welding on a metal strip which was caught in a feed chute of a crusher. The metal was cut free and sprung out hitting the employee and knocking the employee backwards.

A hydraulic hose on the employee's service truck outrigger got caught. The employee reached in to free the hose. EE began to retract the outrigger to gain slack in the hose and did not realize that a hand was in a pinch point. The outrigger broke several bones in the left hand.

Employee was in impact crusher welding - employee was on knees. When EE stood up EE felt pain in lower back and left leg.

Employee was under shaker holding the nuts for another Employee using an impact gun to tighten when pieces of dirt fell and went into the right eye causing it to irritate the eye

Putting lubricant in planetary of L270 loader using air operated pump. Pump developed air leak and stopped working. Employee was trying to find the air leak when piston came down pinching 2 fingers on EE's right hand.

The injured employee was struck by a horizontal support beam mounted on the metal decking as it was being removed at the primary crusher. The metal decking was initial struck and broke free shifting the weight.

Employee had greased drill rod threads, then reached in to remove dirt from table as Driller was moving drill rod carousel to drill rod catching employees right hand and forearm between drill rod and drill carousel causing bruising of forearm and laceration of right hand.

After cutting bushing off of shaft of speed reducer, he leaned over to look at the work, and while holding torch in left hand inadvertently moved torch over his lower right arm causing burn.

EE was using an air tool with a flapper wheel installed on it. He was working on a hoist cylinder for a haul truck. He was cleaning the packing seats to replace the packing. While cleaning the seat a particle of foreign material got in his left eye. He was wearing safety glasses, dust mask and ear muffs but admitted he should have worn a face shield or goggles.

EE was working on front suspensions of pickup truck. He was holding a breaker bar with socket on a nut while other EE was using a 1" drive air powered impact wrench to loosen nut when the breaker bar spun pinching ring finger between shock and breaker bar.

While operating D9H Cat Dozer in a rocky area and working boulders out; he was backing up, when the dozer took a hard bounce and his teeth went together, cracking one of them. Tooth # 19.

EE was helping co-worker with welding a plate for shaker 2 & something went into employee's left eye causing pain. He then went to Occupational Health & they referred him to eye doctor. He has a scratch on his left eye due to a foreign object. Must have flown into his eye. Eye protection was being worn at the time.

EE was washing off a concrete pad with a high pressure water hose, when hose broke and struck EE in the leg, causing injury.

EE WAS USING TORCH TO CUT A BUSHING INSIDE A BREAKER HAMMER WHEN IT BLEW BACK HOT GREASE THAT WAS TRAPPED INSIDE THE BUSING AND CASE CAUSING HOT GREASE TO LAND ON HIS NECK.

WHILE CUTTING STEEL PLATE WITH OXY-ACT TORCH, TIP SLAGGED OVER & THE TORCH WENT OUT. EE BRUSHED TIP WITH GLOVED HAND TO KNOCK DIRT AWAY & THE TORCH REIGNITED BEFORE HE COULD PULL HIS HAND AWAY .

EE WAS DIRECTING A CRANE OPERATOR WHERE TO PUT A LARGE PIECE OF CATWALK WHEN THE SLING BROKE AND LOAD DROPPING ON EE.

EE WAS USING A HAND GRINDER TO GRIND OUT KING PIN BORE WHEN FOREIGN OBJECT GOT BEHIND FACE SHIELD AND GLASSES. EE WENT TO DR AND DR DRILLED A PIECE OF STEEL OUT OF HIS EYE. (RIGHT EYE.)

EE CLIMBED UP ONTO EMBANKMENT TO TRIM A BUSH, A FELLOW EE WAS RUNNING A GASOLINE POWERED WEEK WACKER FITTER WITH A METAL BLADE. COWORKER WAS WORKING BELOW EE. E STUMLED AND STEPPED BACKWARDS T O REGAIN BALANCE AND ARM CONTACTED ROTATING BLADE.

EMPLOYEE WAS PUTTING V BELTS ON HEAD PULLEY OF CONVEYOR WHEN HIS THUMB GOT PINCHED BETWEEN V BELT AND PULLEY. IT TOOK END OF LEFT THUMB OFF.

EE WAS LOADING MATERIAL ON EUCLIDS WITH 80D SHOVEL. THE CABLE ONT HE HOIST BROKE AND SENT A BROKEN PIECE IN THRU AN OPEN WINDOW STRIKING THE EE ON THE LEFT CHEEK OF HIS FACE.

EMPLOYEE WAS WELDING ON THE FLOOR OF STOCK TRUCK IN THE DUMP BED. HE WAS BEN TOVER WELDING =WHEN HIS BACK STARTED TO TIGHTEN UP AND FEEL SOME PIAIN. HE HAD BEEN WELDING FOR QUITE SOEM TIME. HIS BACK GOT WORSE WHEN HE GOT HOME.

EMPL COMPLAINED ABOUT THE PRIMARY CRUSHER ROTORSBEING OUT OF BALANCE CUASING THE PRIMARY CONTROLROOM TO VIBRATE MORE THAN USUAL, RESULTING IN HIS LOWER BACK HURTING.

EMPLOYEE WAS DOING VARIOUS JOBS THROUGHOUT THE DAY. HE DID NOT REALIZE ANYTHING WAS IN HIS EYE UNTIL LATE IN THE DAY. IRRITATION BECAME MORE INTENSE AND HE DECIDED TO GO FOR AN EXAMINATION. DO OCTOR FOUND A PIECE OF STEEL IN HIS RIGHT EYE.

EMPLOYEE WAS CUTTING SQUARE BLOCKS OUT OF 2 1/2" THICK STEEL PLATE WHICH WAS APPROX. ONE FOOT OFF OF THE FLOOR SURFACE IN THE GARAGE. WHILE CUTTING THESE PLATES, EE HAD HIS FOOT UNDER THE PLAT E AND ALL THE HOT SLAG WAS BEING BLOWN ON HIS LEEFT SHOE, BURNING A HOLE IN HIS PANTS AND HEATING UP HIS STEEL TOE CAUSING HIS FOOT TO BECOME BURNED.

PINCHED LITTLE FINGER OF RT HAND BETWEEN TWO PIECES OF STEEL REQUIRED STITCHES

54736YEE WAS PRYING A LUMP OF ASPHALT MATERIAL THAT WAS BRIDGED OVER THE OPENING OF A HAMMERMILL. BAR WHICH EMPLOYEE WAS USING WENT THRU THE LUMP STRIKING THE MOVING ROTAR OF HAMMERMILL. THE F 69350RIPPED BAR FROM EMPLOYEE'S HAND CAUSING A LACERATION AT THE BASE OF HIS RIGHT THUMB.

54736YEE WAS PULLING ON LEVER ON THE DROPBALL AS HE WAS RUNNING IT.

HE WAS TIGHTENING THE WEDGES ON HAMMERS OF THE EAST ROTOR IN THE PRIMARY CRUSHER AT THE SAME TIME THE WELDER WAS WELDING ON THE WEST ROTOR. THE FLASH FROM THE WELDING ARC BURNED HIS EYES.

EMPLOYEE WAS CUTTING METAL OUT OF PINNING FEEDER HOPPER WITH CUTTING TORCH HE REACHED DOWN TO PULL METAL OUT & THE METAL DROPPED APPROX 6IN PINCHING HIS FINGERS METAL WAS APPROX 3/4INX8INX6FT RT HAND INDEX FINGER WAS FRACTURED

WHILE INJURED WAS CUTTING AND REMOVING WORN OUT LINER PLATES FROM TEH HOT BINS OF #2 B.C. PLANT. HE WAS CUTTING A 3'X3'X 1/4" PLATE AND SET IT ON THE SCAFFOLD ABOVE WHERE HE WAS WORKING. WHE N HE CONTINUED CUTTING MORE PLATES OUT OF THE BINS HIS HOSE OF THE TORCH BECAME ENTANGLED WITH THE PLATE ON THE SCAFFOLD. HE PULLED ON THE HOSE OF TORCH CAUSING THE PLATE TO HIT HIM ON THE RI

EE WAS OPERATING A NORTHWEST 80D SHOVEL. WHILE OPERATING THE UNIT. THE RIGHT BRAKE PEDDLE SNAPPED BACK UNEXPECTEDLY THIS RESULTED IN PULLED RIGHT CALF MUSCLES.

BELTMAN OPERQTING EQUIPMENT ON ROUGH GROUND.

REMOVING SCREEN DECK WEDGES USING A HAMMER AND TORCH, WAS HITTING CUT WEDGE AND HAMMER REBOUNDED AND FLAME CONTACTED BACK OF LEFT HAND.

EMPLOYEE WAS WELDING OVERHEAD WHEN A PIECE OF SLAG ENTERED HIS LEFT EYE.

I.NAME WALKED PAST WELDER USING AIR ARC.SMALL SPARK FLEW INTO I.NAMES EYE.

MOVING A PIECE OF STEEL LOADER CRANE DOWN ON LEFT FOOT 3 BROKEN TOES.

EMPLOYEE WAS OPERATING CRUSHER FROM OUTSIDE SHED WHEN A ROCK FLEW OUT OF CRUSHER AND STRUCK HIM ABOVE THE LEFT EYE.

HH CLAIMED WHILE BURNING SLAG OFF A 3" PIPE FROM THE DUST COLLECTOR WATER LINE, HE WAS HOLDING ON TO THE PIPE WITH HIS LEFT HAND, AND BURNING WITH HIS RIGHT HAND. AS HE FINISHED BURNING HE PUL LED THE TORCH ACROSS HIS LEFT HAND.

SEE ATTACH SHEET BUT THE SHEET WAS NEVER WITH THE NOTE OH WELL !!!!!!

AFTER PUTTING DOWN BEAD OF WELD EMPL TOOK CHIPPING HAMMER & NOCKED SLAG FROM WELDED AREA. EMPL WAS WEARING PRESCIPTION GLASSES & FULL FACE SHIELD. SOMEHOW FRAGMENT OF METAL FOUND ITS WAY TO EY E & LODGED IN PUPIL WHERE UPON NEXT DAY HE HAD MEDICAL TREATMENT TO REMOVE IT.

GRINDING GUSSET PLATE IN A VISE WITH A HAND GRINDER. WHEEL APPARENTLY CAUGHT ON EDGE OF PLATE TWISTING GRINDER AROUND IN HIS HAND. THE EDGE OF THE WHEEL CUT HIS HAND.

EMPLOYEE WAS BACKING UP A D-8 BULLDOZER TRYING TO AVOID A THREE FEET HIGH BENCH OF STONE. THE EMPLOYEE MISJUDGED AND BACKED INTO THE BENCH CAUSING THE BULLDOZER TO STOP SUDDENLY. THE EMPLOYEE' S BACK AND NECK WERE WRENCHED.

HE CLAIMED WHILE HE WAS SITTING UP INSIDE FEEDER, HE WAS BURNING OFF BOLTS THAT RETAIN WEARPLATER FROM THE OUTSIDE, WHEN HE PULLED THE PLATE OUT OF POSTION, ONE BOLT GOT TIPPED BETWEEN THE PLA TE AND HIS LEFT LEG ATTEMPTING THROUGH PANTS AND ROLLED DWN HIS LEG.

TWO EMPLOYEES WERE CUTTING DOWN TREES ON THE HILL AT THE EAST SIDE OF THE QUARRY WHEN THE TREE BEING CUT BY THE OTHER MAN FELL ON TOP OF I,NAME TWISTING HIS RIGHT ANKLE.

EMPL WAS GRINDING A TIE ROD SEPARATOR FORK WHEN GRINDER WHEEL CAUGHT ON FORK OF SEPARATOR AND DISENGAGED FORM THE GRINDER CAUSING A LACERATION TO THE LOWER STOMACH

EMPLOYEE WAS WELDING UNDER A BELT CONVEYOR. WHEN HE WENT TO STAND UP, HE HIT HIS HEAD ON THE CONVEYOR. THE EMPLOYEE WAS WEARING A HARD HAT. HE FELT PAIN IN HIS BACK AND LATER HAD NUMBNESS IN T HE HANDS AND LEGS.