Buscar en el registro

Tire Tech pinched hand with torque gun during maintenance activity on LDR1.

Mine Maintenance Employee struck/dragged across ground approximately 6 feet by SH22 hoist ropes during maintenance activity.

Employee's right index fingertip was amputated inside the pin hole of the Tube Press 6 ram when the Overhead Crane raised the yolk out of the candle eye.

Dozer D10-23 Operator reported pop in back and immediate pain.

HT132 Operator reported rough load injury at SH22.

SH8 Operator sustained rough loading injury after hitting a hard spot. The seat was discovered to be damaged allowing forward and back movement of about 3-4 inches.

HT205 Operator reported back pain from rough load at SH11. Shift started at 6:30 PM on 10/12/2023.

CLP Employee working near the vent valve at the big boiler felt a splash on their face, wiped their face with their gloves on and felt burning.

HT Operator reported rough load injury to back and neck from boulder hitting canopy from dipper.

Employee was operating HT 202 and was loaded from Shovel 11 and reported they were feeling some back pain.

Rubber Tire Dozer Operator hit a bump and the seat bottomed out twice, causing pain their lower back.

Employee hit a hard toe while operating a Rubber Tire Dozer; arm rest jammed their left elbow up, causing pain in their shoulder.

A mantle liner was being prepared to be hoisted to another position - rigging from the crane caught one of the ears on the mantle, knocking it off the cribbing onto employee's foot. Foot was not amputated at the time of incident.

Haul Truck Operator reported being struck twice during their shift on the canopy side of the inside of the bed by the Shovel bucket.

Rubber Tire Dozer Operator working on the N3 near SH8 stated their back was hurting and was evaluated by the WVFD. Operator returned to work and was seen at the Clinic the following day and they were released to work with restrictions.

While using an impact gun to tighten bolts on a haul truck u-joint, employee reported a foreign object/irritation to the left eye.

Haul Truck Operator was rough loaded at Shovel, causing pain in the lower back and hip area.

Driver of haul truck was backing under shovel and was not square to the house. Shovel Operator loaded the haul truck anyway, creating a rocking motion which caused pain in the Driver's back.

Employee was air-arcing on the revolving frame beneath a P&H 4100A shovel. Hot slag entered through the employees protective coveralls and fell down into EE's steel-toed right boot. The employee sustained 2nd and 3rd degree burns on the top of EE's right foot.

While being loaded by the shovel a boulder fell off and hit the dove tail of the haul truck. Operator began to feel pain in lower back.

Boulder fell onto dove tail of haul truck while being loaded by a shovel, causing pain in employees lower back.

EE was using rotary/demo hammer to remove tile. The spade bit needed to be repositioned. EE held hammer in lap to reposition bit. Hammer slipped & EE reacted by grabbing handle and hit trigger. The chuck closed and EE's glove caught in the chuck and spun. EE's right 2 middle fingers were lacerated by the glove material tearing when caught in the rotation.

Shovel operator tripped the dipper near the dove tail resulting in rough loading. Haul truck operator felt some pain in their back.

Employee experienced right lumbar strain after dipper made contact with HT.

Employee reported that while being loaded by shovel, the shovel had a swing divider failure causing the bucket to hit the bed of the haul truck.

Employee assisted in the welding repair on 8/4 at 16:30 - the next day employee reported to the supervisor of the possibility of a flash burn to EE's eye.

Operator backed over a boulder in D-10-25 and jarred self when it hit the ground hurting EE's shoulder.

Operator let the clutch out on blade 18 and it lunged forward whip lashing EE hurting EE's back.

While welding on a truck fender, employee lifted welding hood with safety glasses on to inspect the area they were welding. The welding electrode inadvertently arced and that is when they felt debris enter an eye

While operating D10-23 on the IOS Mill Stockpile, it tracked backwards over a small windrow causing the employee to feel a sharp pain in the right hip.

Shovel bucket made contact with the dovetail of the haul truck rocking the truck causing employee to feel pain in back and neck.

While employee was drilling through 3" channel steel with a hand drill, the drill bit caught and spun the drill motor around hitting employee in the lip with the battery.

While cutting tubing for hand rail, grinder bound and kicked back causing a cut to employee's leg.

Teammate was using a 1" impact gun to install lugs on wheel and lacerated left thumb

While tack welding on rock knockers on a haul truck bed in the overhead position, a hot chunk of molten slag fell from the weld puddle and landed on employee's upper right thigh causing a burn.

While pioneering a road, and due to road conditions, track dozer rolled over

As cable was being rolled up it became stuck in some mud and when it broke free the cable struck employee. Employee regained footing and while walking back to the vehicle started feeling pain. Employee called for supervisor and was taken to clinic for evaluation. The employee's leg was fractured and they were unable to return to work for next scheduled shift.

While removing 2" nut from the feed end of the number 3 auto mill, impact wrench slipped and employee hurt left pinky finger.

Shovel was loading HT 131 when the dipper contacted the bed causing employee to feel pain in neck.

Employee experienced a rough load from Shovel causing neck to hurt

Technician was replacing a step on the pusharm of a D10. Tech tack-welded it in place and went to weld the underside when the 100lb step fell off and landed on thumb.

While being loaded by Shovel 10, shovel hit the back of the bed causing the employee to feel pain in neck and shoulders

Employee reported that while operating Shovel (AC10), employee's right wrist began to hurt

Employee reported while being loaded by Shovel 8, a boulder hit the bed of the truck shaking it.

Employee was laying on the floor using a needle scaler to clean up welding cuts, and got some debris in right eye.

Truck was padded with loose material for a boulder to be loaded. When shovel swung over the bed to load the boulder, the boulder fell through the bucket door onto the back of the haul truck bed. This caused the truck bed to pick up and fall back down jarring the truck driver.

While welding HDPE pipe together, pipe moved and pinched employee's left ring finger.

Employee was pinned between rubber tire dozer push arm and left front tire.

While using a cordless drill, employee drilled through plate and struck his right index finger.

While adjusting seat in shovel, employee felt pain to right shoulder and elbow