Buscar en el registro

A Technician was working on crack repair in the revolving frame on a Marion 8750. While grinding, a small metal fragment contacted the employees right eye while wearing safety glasses and a welding hood.

Employee was cleaning the conveyor belt with a Vac Truck, when their arm was injured by the suction hose.

Employee was using a wire-wheel grinder to clean a S-hook used for painting. The S-hook got caught in the wire-wheel, injuring the employee's finger.

Working with boring bar.

An employee was cleaning mud and ice in the Shop with a Wrangler when the cutting edge got hooked on the rails that are embedded into the concrete floor. This caused the Wrangler to stop abruptly and the employee hit his lower lip on the steering wheel. The employee received a laceration that required stitches. The employee was wearing a seatbelt.

The employee was standing between the tri-structure and fairlead tower. He was in the process of removing a piece of keystock from the back leg of the fairlead tower. The employee was using a 5 inch grinder and a 5 inch wheel to remove the tack welds that were holding down the keystock. During this process the grinder kicked back, and struck his right leg causing a laceration.

I WAS UP ON LIFT UNWINDING SPRINGS TO CHANGE OUT SPROCKET ON OPENER. I WAS TAKING OUT BOLTS AND NUTS WITH IMPACT WRENCH AND BACKUP WRENCH, WHEN I TOOK OUT FIRST BOLT AND NUT SPRING BEARING PLATE SPUN AROUND SHAFT AND CAUGHT MY WRIST AND CUT IT.

Employee was grinding welds between 2 safety posts that come together. The grinder jammed between the post and kicked back hitting the employee in the welding shield breaking the hood. The clear lens and plastic on the hood broke causing lacerations and scratches on the employee's nose. The employee was taken into a clinic where he received 6 stitches.

Emp noticed an eye irritation in his right eye on the evening of 2/3/12. The emp was fitting the top rim angle on a fuel tank earlier that day on a mine site. The emp did not seek medical attention until 2/6/12. An optometrist diagnosed that he had developed a scratch on his eye but was released to come back to work that day with prescription antibiotic eye drops.

Employee was setting up a punch press when a piece of metal flew into the employee's right eye.

CUTTING OUT BAD AREA OF A PATCH ON A PIPE. INSTALLED THE SAWZALL, SLIPPED AND POKED HIS LOWER LEFT CALF DAMAGING HIS ARTERY AND MUSCLE.

CUTTING WEAR PLATE WITH AIR ARC TO CUT THE WELD, WELD BROKE PLATE FELL STRIKING EE.

WHILE JACKING A FAIRLEAD PIN OUT USING A 100 TONHYDRAULIC JACK, THE STRON BACK (METAL PLATE) FELL AGAINST THE JACK AND PINCHED THE EMPS FINGER BETWEEN THE JACK AND THE METAL PLATE. RESULTED IN A LACERATION TO THE RIGHT HAND RING FINGER WHICHREQUIRED SUTURING.

WHILE OPERATING A SCRAPER LOADING SUBSOIL, A PUSHCAT DOZER TAGGED UP TO THE SCRAPER AND STARTED PUSHING IT. THERE WAS SOME FROST IN THE GROUND THAT WAS BEING LOADED. THE FROSTED GROUND BROKE L OOSE AND THE SCRAPER SURGED FORWARD LOSING CONTACT WITH THE PUSHCAT. WHEN THE PUSHCAT CAUGHT UP WITH THE SCRAPER AGAIN IT STRUCK HARD CAUSING THE SCRAPER OPERATOR TO BEND BACK OVER THE SEAT.

WELDING TUB SECTION, SLAG GOT INTO EYE.

2 MEN WERE FOLLOWING CABLE ATTACHED TO BELT END FROM TRUCK MOUNTED WINCH. BELT STARTED TO GO OFF TO RIGHT HAND SIDE. THEY WERE ABOUT TO BELT OVER WHEN PULL PLATE ATTACHED TO PULLING ROLLER BRO KE AND STRUCK BOTH MEN BELOW KNEES.

TWO MEN WERE FOLLOWING CABLE ATTACHED TO BELT END FROM TRUCK MOUNTED WINCH. BELT STARTED TO GO OFF TO RT. HAND SIDE. THEY WERE ABOUT TO PULL BELT OVER WHEN METAL PULL PLATE ATTACHED TO PULLING ROLLER BROKE AND STRUCK BOTH MEN BELOW KNEES.

WHILE POUNDING IN A STEEL POST WITH POST DRIVER,THE POST DRIVER SLIPPED OFF THE POST AND WHEN THE EMPLOYEE LOWERED THE POST DRIVER IT HIT HIS RIGHT THUMB. THE THUMB WAS SMASHED BETWEEN THE TOP OF THE POST AND THE POST DRIVER. IT RESULTEDIN A FRACTURE OF THE RIGHT HAND THUMB AND REQUIRED SUTURING.

EMPLOYEE WAS DOING OVERHEAD GRINDING ON ARCH OF DRAGLINE BUCKET. GRINDING DISC CAUGHT IN CRACK ON ARCH CAUSING GRINDER TO DISLODGE AND HIT EMPLOYEE'S FACE SHIELD. FORCE OF IMPACT FLEXED FACESH IELD BACK CUTTING LIP AND KNOCKING OUT FRONT TOOTH.

WHILE AIR ARCING BROKEN DOZER BLADE LINER, THE LOWER SECTION OF THE LINER POPPED LOOSE AND STRUCK THE EMPLOYEE ON HIS LEFT SIDE OF THE HEAD. THE EMPLOYEE SUSTAINED A BRUISE TO THE HEAD AND LO ST CONSCIOUSNESS MOMENTARILY.

BENT OVER TO PICK UP AN OBJECT ON THE FLOOR IN THE CAB OF A 245 CAT BACKHOE AND STRUCK THE STEERING LEVER WITH HIS MOUTH. RESULTED IN CHIPPING A TOOTH IN THE FRONT OF HIS LOWER JAW.

WHILE DISMOUNTING FROM LOADING SHOVEL INJURED FELL AGAINST OUTSIDE RAIL OF THE POWERED STEP WHENIT CAME TO A STOP IN LOWERED POSITION AFTER A FREE-FALL OF 10-15'. EMPLOYEE IS OFF WORK & UNDER MEDICAL CARE.

EMPLOYEE WAS WELDING GOT SOMETHING IN EYE.

AIR CHIPPING AND METAL FLEW INTO EYE.

EMPL SUFFERED ASTHMA ATTACK WHILE AT WORK. EMPL HAD BEEN EXPOSED TO WELDING FUMES.

DURING THE SHIFT ON 5-14-91, HE HAD BEEN INVOLVED IN GRINDING AND BUFFING ON A FAIRLEAD ON AN 8750 DRAGLINE. THE NEXT MOVING HE AWOKE WITH AN IRRITATION TO HIS RIGHT EYE. A PHYSICIAN REMOVED A SMALL PIECE OF METAL AND RUST FROM HIS EYE. HE DID NOT KNOW HOW THE METAL GOT INTO HIS EYE.

WHEN TORQUING MOUNTING BOLTS ON FINAL DRIVE USING HYDRAULIC WRENCH I RATCHED DOWN & SWITCH FROM ONE BOLT TO THE NEXT ONE GETTING MY FINGER BETWEEN HYDRAULIC WRENCH LEVER & CYLINDER AS THE CY LINDER WAS RETRACTING-(MIDDLE FINGER)

A DRAGLINE GROUNDPEROSN GOT A PIECE OF STEEL IN HER EYE WHILE GRINDING ON A PROPEL ECCENTRIC ON AN 8750 DRAGLINE. SAFETY GLASSES AND A FACE SHIELD WERE BEING WORN AT THE TIME.

WHILE DISCONNECTING AN AIR HOSE, I,NAME WAS HIT IN THE MOUTH WITH THE COUPLER AT THE END OF THE HOSE. SUTURING WAS REQRUIRED.

THE PITMAN ONA 195M DRAGLINE MAY HAVE STRAINED HER BACK WHILE CHANGING DRAG ROPES SHE SOUGHT MEDICAL TREATMENT ON 11-14-88

REPORTED FEELING SOMETHING IN EYE TUES PM CAME TO WORK WED SHIFT WORKED TIL 4 AM WHEN EYE CONTINUED TO BOTHER HIM.

HE WAS GRINDING3A SEAL RETAINER FOR A COAL TRUCK DIFFERENTIAL WHEN THE RETAINER SLIPPED FROM THE VISE.AS HE GRABBED FOR THE RETAINER, THE GRINDER CAUGHT HIS WRIST.SUTURES WERE REQUIRED.HE RETU RNED TO WORK TH9 SAME SHIFT.

WHILE DEAD HEAD3NG A 195M DRAGLINE THE PIT MAN GOT HIS ANKLE CAUGHT BETWEEN THE POWER CABLE AND THE TRACTOR D RING TIS CAUSED A FRACTURE OF RIGHT ANKLE

EMPL INJ LEFT I3DEX FINGER WHILE USING MICA CUTTER WHEN HE WAS UNDERCUTTING COMMUTATER ON SWING GENERATOR OF DRAGLINE.INJURY REQ SUTURES.

RESTRAINING PIN ON PNEUMATIC WRENCH CAME LOOSE STRIKING INJ ON LEFT HAND.6 SUTURES PLACED IN LEFT PALM BY MED DR.

VICTIM WAS REMOVING GREASE ACCUMULATION FROM ROLLER RAIL OF AN 8750 DRAGLINE THE GREASE WAS HEATED TO EASE REMOVAL A SMALL AMOUNT OF THGE HEATED GREASE CAME IN CONTACT WITH VICTIMS LEFT WRIST CAUSING A BURN TO THE WRIST