Buscar en el registro

Employee was using a cutting torch to do repair work and a piece of metal went under his safety glasses and stuck in his eye. Went to Dr. and had it removed and given medicine.

Was moving rock and material with dozer and dozer blade slipped off edge of rock causing dozer to jolt.

Was cutting piece of metal w/hand torch-piece of spark went under glasses into rt eye. Went to Dr. and was given eye drops.

Employee was using steam ginny to clean off highwall miner - slipped on wet surface injurying ribs & rt shoulder. Went to Dr. Has cracked ribs & pulled muscle in shoulder.

EE WAS BRINGING DOZER OF BENCHED AREA. DOZER CAME DOWN ON BIG ROCK, WHEN DOZER CAME OFF ROCK IT JERKED HIM FORWARD & BACK, CAUSING NECK AND LOWER BACK PAIN, DR. TOLD HIM IT WAS SIMILAR TO WHIP LASH. SCHEDULED TO BE OFF TIL 6-26-02.

EE WAS SLOPING WITH D-6 DOZER. NOTICED PAIN IN NECK AND SHOULDERS. THOUGHT IT WOULD GO AWAY. MUSCLE SWELLED BETWEEN SHOULDERS. SAW DR ON 9/1/00. PAIN MED, MUSCLE RELAXERS, & THERAPY FOR 2 OR 3 TIMES.

EE WAS USING DOZER TO TRY AND PRY STUMP OUT OF GROUND. BLADE SLIPPED OUT FROM UNDER STUMP, CAUSING DOZER TO JERK REAL BAD, PULLED MUSCLE IN RIGHT SIDE LOWER BACK. DR. TOLD HIM TO TAKE 2-3 DAYS AT HOME THEN GO TO REGULAR DR.

EE WAS WORKING RECLAIMING WITH D-6 DOZER ON ABOUT A 5-6 FOOT LIFT DOZER GOT ON ROCK AND FLIPPED UP OFF OF IT. OPERATOR WAS NOT WEARING SEAT BELTS BUT HAD BEEN TOLD TO. HE WAS TOLD BY DR TO STA Y OFF WORK ABOUT WEEK.

EMPLOYEE WAS OPERATING DOZER SAID HE NOTICED A BURNING SENSATION IN HIS LOWER RIGHT ABDOMEN.IT TURNED OUT TO BE A HERNIA.HE STATED HE HAD NOT PULLED ON ANYTHING OF LIFTED ANYTHING. IT IS UNKNO WN WHAT CAUSED THI.SURGERY WAS DONE 08-11-93.

EMPLOYEE WAS USING IMPACT WRENCH & AIR OFF OF IMPACT WRENCH BLEW A PIECE OF RUST INTO HIS RIGHT EYE, WAS SUPPOSED TO HAVE BEEN WEARING SAFETY GLASSES. FORIEGN OBJECT IN EYE - REMOVED OBJECT & GIVE EYE DROPS.

EMPLOYEE WAS CHECKING A STOPPED UP TUBE ON A CAROUSEL IN A COAL SAMPLER THAT WE WERE TRYING [TO UNPLUG]. CAROUSEL STARTED MOVING BEFORE HE COULD GET HIS HAND OUT AND IT LACERATED 3 FINGERS. EM PLOYEE KNOWS HE SHOULD HAVE TURNED IT OFF BEFORE CHECKING. HUMAN ERROR.

EMPLOYEE STATED HE WAS FUELING A BACKHOE AND IT ROLLED BACK INTO HIS RIGHT LEG CAUSING ABRASIONS AND ALSO A MUSCLE PULL IN RIGHT HIP.THE REASON THIS REPORT IS BEING MADE NOW,THERE WAS NO DOCTO R SEEN NO TIME LOST UNTIL SEPT 30,1992.HE STATED HE HAD BUCKET DOWN BUT BREAK NOT APPLIED. WE STILL DO NOT KNOW WHAT PROBLEM IS.SEPT 30-1992 FIRST LOST DAY.

EMPLOYEE WAS USING ELECTRIC GINDER GRINDING DOWN SOME ROUGH SPOTS ON A PIECE OF METAL GRINDER SLIPPED OFF HITTING EMPLOYEES RIGHT LEG & CUT IT. DAMAGE TO LEG REQUIRED STITCHES & BANDAGE. THIS TIPPLE IS NOT IN OPERATION IT IS BEING PREPARED FOR COAL RUNNING.

USING GRINDER TO GET ROUGH EDGE OFF PIECE OF MEATAL.DIDNT GET GLASSES AND 2 OR 3 PIECES OF METAL GOT IN HIS RIGHT EYE.

WAS WORKING ON 5IR SYSTEM ON A DRILL THE LINES WERE CLOGGED HE TURNED THE HOSE UP AND LOOKED IN HOSE, AND WHEN HE DID THE HOSE CAME UNCLOGGED HITTING HIM IN RT EYE AND FACE AIR PRESSURE WAS ABOUT 100 PSI 3

EMPLOYEE WAS USING A TORCH CUTTING METAL A PIECE OF SLAG FROM THE METAL FLEW AND HIT HIM IN EYE METAL REMOVED FROM EYE GIVEN MEDICATION TO PREVENT INFECTION

EE WAS CHANGING A STARTER STEEL & DRILL BIT OIN DRILL WHEN DRILL OP TURNED STEEL TO BREAK LOOSE BIT EES FOREFINGER GOT CAUGHT BETWEEN STEEL & DRILL MAST. EE HAD BEEN ADVISED NOT TO WORK ON MO VING PARTS OF DRILL WITHOUT TAKING EXTRA SAFETY MEASURES.

EMP WAS OPERATING BACKHOE WHICH HE HAS 18 YRS EXPERIENCE TO DIG UP SOME OLD DRAIN PIPES WHILE ATTEMPTING TO MOVE BACKHOE WHTIH BUCKET IT STARTED OFF INCLINE HE TRIED STOPPING IT WITH BUCKET BUT THIS DID NOT WORK BACKHOE STRUCK TREE PULLED MUSCLES IN RT SIDE OF BACK X RAYS NEG TYLENOL #3 RELAXERS DEMORAL SHOT BACKHOE BRAKES WERE NOT LOCKED AND THEY ARE GOOD HE WAS GIVEN A SAFETY

EMPLOYEE WAS HELPING ON DRILL, WHEN ATTEMPTING TO BREAK STEEL WITH BREAKER PIN, BREAKER PIN TURNED IN HIS HAND CATCHING HIS RIGHT MIDDLE FINGER BETWEEN PIN AND DRILL CHAIN.