Buscar en el registro

EMPLOYEE WAS BOLTING TOP, PUT HIS HAND UP TO STRAIGHTEN PLATE, PUT BOLT UP AND CAUGHT LEFT MIDDLE FINGER UNDER PLATE SMASHING FINGER. *CUT OFF TIP OF FINGER, LOST TIME ACCIDENT*

EE WAS UNDER CONTINUOUS MINER GRINDING AND METAL FLEW INTO HIS LEFT EYE EVEN THOUGH HE HAD ON A FACE SHIELD AND GLASSES. REPORTABLE BECAUSE HE RECEIVED A PRESCRIPTION FOR INFECTION.

EE WAS BOLTING TOP WHEN HIS LEFT HAND GLOVE CAUGHT BETWEEN STEEL AND HEAD OF PINNER TWISTING HANDS AND WRIST. REPORTABLE BECAUSE FRACTURE OF LEFT FOREFINGER.

EE WAS UNLOADING SUPPLIES. ROFBOLTER OPERATOR SWUNG THE DRILL ARM OUT AND CAUGHT EE'S RIGHT KNEE AGAINST THE SCOOP.

EMPLOYEE WAS BOLTING TOP WHEN RIB AND ROCK ROLLED AND HIT HIM IN LOWER BACK KNOCKING HIM INTO PINNER AND KNOCKING HIM OUT.

EE WAS RUNNING ROOF BOLTER OPERATOR AND RAN BOLTER WHEEL OVER HIS FOOT. REPORTABLE-LOST TIME- STICHES, FRACTURE

EMPLOYEE WAS BENDING A BOLT IN #5 RIGHT WHEN HE FELT HIS LOWER BACK START HURTING. REPORTALE BECAUSE EMPLOYEE IS OUT OF WORK.

EE WAS USING TWO PIECE SECTIONAL DRILL STEEL WHEN HIS FINGER GOT CAUGHT BETWEEN THE CONNECTING JOINT OF THE TWO PIECES AS HE WAS PUSHING STEEL INTO DRILL HOLE.

EMPLOYEE WA SBOLTING TOP WHEN APIECE OF DRAWROCK FELL STRIKING EMPLOYEE ON LEFT FOREARM, CAUSING A LACERATION THAT REQUIRED 6 SUTURES.

EMP WAS DRILLING TOP, RIGHT HAND WAS ON TOP OF DRILL HEAD, WHEN HE PUSHED BOLT UP HE CAUGHT HIS RIGHT HAND BETWEEN TOP OF DRILL HEAD AND T-BAR WHICK CRUSHED HIS HAND.

EE WAS HELPING ON PINNER WHEN A PIECE OF ROCK FELL FROM BETWEEN THE RIB AND FIRST BOLT STRIKING EE IN THE HEAD AND BEHIND THE LEFT EAR. ROCK WAS APPROX 2'W X 7' LG X 18" T.

EMP WAS BOLTING TOP AND LOOKING UP WHEN ROCK CAME LOOSE WHERE HAE HAD STARTED DRILL AND A SMALL PIECE OF DEBRIS FELL IN HIS LEFT EYE (POSSIBLE SANDSTONE).

EMP HAD HIS HAND ON TOP OF HEAD OF BOLTER WHEN HE WAS PUTTING UP BOLT AND CAP. COAL WAS BETWEEN THE BOLT AND PLATE AND CAUGHT INDEX FIGNER ON RIGHT HAND.

EMP WAS PUTTING UP A BOLT IN #6 HEADING WHEN BOLT BENT OVER. BOLT WRENCH BROKE AND A PORTION OF IT STRUCK EMP IN LEFT EYE AREA.

EE WAS INSTALLING A ROOFBOLT WHILE PUSHING IT UP WITH THE BOLT WRENCH, THE BOLT BENT & THE WRENCH CAUGHT HIS LITTLE FINGER, MASHING THE NAIL & CAUSING A LACERATION ON HIS RIGHT LITTLE FINGER. [POSSIBLE FRACTURE]

A ROCK 3' LONG X 9" WIDE X 4" THICK FELL FROM TOP AROUND STEEL. LANDED ON HEAD OF PINNER AND BROKE INTO TWO PIECES. ONE PIECE OF THE ROCK (16" LONG X 9" WIDE X 4" THICK) FELL FROM HEAD OF PINN ED AND LANDED ON RIGHT HAND OF EE WHO WAS RESTING IT ON THE MINE FLOOR.

EE WAS OPERATING ROOFBOLTER, HIS HAND WAS RIDING GUARD WHILE PUSHING UP BOLT (COW CATCHER AROUND HEAD) AND SMASHED FINGER BETWEEN TOP AND GUARD.

EE WAS TRAMMING PINNER FROM ONE PLACE TO ANOTEHR. MACHINE WEN TOVER A RISE IN BOTTOM THROWING HIS HEAD INTO TOP.

EMPLOYEE WAS OEPRATING HIS SHUTTLE CAR WHEN THE CONTINUOUS MINER IN FRONT OF HIS GOT IN A BIND AND THE BOOM OF THE MINER BEING RAISED AGAINST THE TOP CAUSED ROCK AND COAL TO FLY FROM THE MINER . A FIST SIZE ROCK HIT EMPLOYEE'S RIGHT HAND.

BOLTING IN #4 HEADING HAD PUT UP OUTSIDE BOLT AND SET UP TO PUT 2ND BOLT UPWHEN ROCK FELL BETWEEN BOLTS.

EMPLOYEE STATED THAT WHEN HE WAS BENDING ABOLT, HIS SHOULDER (LEFT) GAVE OUT.

EE WAS BOLTING TOP WHEN A ROCK BROKE LOOSE & FELL DOWN THE STEEL, THE ROCK WAS APPROXIMATELY 3' L, 2' W, & 3" THICK. THE ROCK DROPPED ON EE'S LEFT HAND.

PIECE OF DRAW ROCK 16" LONG 4" THICK 6" FEL AND HIT EMPLOYEE ON LEFT SHOULDER.

EE WAS USING HYDRAULIC CHAIN SAW & CHAIN BROKE STRIKING KNUCKLES OF RIGHT HAND.

EMPLOYEE WAS ROOF BOLTIG WHEN A ROCK 5/X5/X4" THICK FELL AS EMPLOYEYE WAS SETTING HIS SAFETY JACK. THE ROCK FELL STRIKING BOTH OF EMPLOYEE'S FEET.

EMPLOYEE WAS CUTTING DRAW ROCK AND LETTING THE MINER CUT IT UP. THE CONTINUOUS MINER BOUNCED CAUSING THE EMPLOYEE TO BE BOUNCED (HEAD FIRST) INTO THE CANOPY.

EE WAS REPLACING A BENT ROOF PLATE WHEN WRENCH CAME OFF BOLT HEAD STRIKING HIM ON THE RIGHT HAND AND FINGERS.

EMP WAS RUNNING ROOFBOLTER AND HAD JUST ADVANCEDBOLTER UP AND WAS MARKING BOLTS OFF WHEN A ROCK FELL OUT BETWEEN LAST ROW OF BOLTS AND THE ATRS STRUCK HIM IN THE HELMET, PINNING HIS LEFT LEG U NDERNEATH THE ROCK. ROCK WAS APPROX 4'L,2'W TAPERING OFF TO A POINT.

EE WAS RUNNING ROOFBOLTER AND INSTALLING A RIB BOLT ON LAST ROW OF BOLTS IN THE FACE WHEN HIS RIGHT HAND BECAME ENTANGLED IN WRENCH WHILE SPINNING A BOLT.

EMPLOYEE WAS OPERATING RIGHT SIDE OF ROOFBOLTER WHEN LET HEAD DOWN CAME DOWN ON RIGHT KNEE

EE WAS RUNNING MINER ON THE PILLAR SECTION, TOP STARTED TO FALL IN, EE LEFT MINER AND A PIECE OF ROCK HIT HIM ON THE LEFT HIP CAUSING THE INJURY.

EMPLOYEE WAS BOLTING WHEN A PIECE OF DRAW SLATE (12 INCHES BY 3" THICK) FELL AND HIT HIS LEFT HAND.

EE WAS BURNING KEEPER OFF CAP PAD UNDER MACHINE WHEN A PIECE OF SLAG GOT IN HIS EAR. DID NOT THINK THERE WAS A PROBLEM SINCE HE GOT SLAG OUT UNTIL A COUPLE OF DAYS LATER WHEN HE BLEW HIS NOSE AND AIR CAME OUT HIS EAR AT WHICH TIME HE WENT TO DR HE HAS MISSED TWO DAYS WORK, 12-1-94 AND 12-2-94.

ROCK ABOUT SIZE OF QUARTER SPUN OFF STARTER STEEL WHEN BOLTING &HIT EMPOYEE ABOVE & BELOW RT EYE BETWEEN BROW & LASH & RT CHEEK BONE CAUSING LACERATIONS 1/4 TO 3/8 INCHES LONG

EMPLOYEE WAS BOLTING THE TOP STARTING THE STARTER STEEL WHEN A ROCK (12INX12INX2IN) FELL OUT OF THE TOP & HIT THE EMPLOYEE ON THE HEAD THE ROCK THEN SLID OFF & HIT THE EMPLOYEES LEFT HAND & AR M CATCHING THEM BETWEEN THE BOLTER HEAD & THE FRAME

EMPLOYEE HAD FINISHED PINNING HIS SIDE NAD HAD PLACED HSI HAND ON TOPOF THE CANOPY WHILE WAITING FOR THE OTHER OPERATOR WHEN A ROCK APPROX 2'X8"X1" FELL FROM BETWEEN THE BOLTS MASHING THE THUM B OF HIS RIGHT HAND.

EMPLOYEE WAS WATCHING THE MINER CABLE AND WAS ACCIDENTLY CAUGHT BETWEEN THE MINER RIPPER HEAD AND THE RIB.

EE WAS DRILLING THE TOP WHEN A SMALL FLAKE OF STEEL GOT INTO HIS RIGHT EYE.

EMPLOYEE WAS TAKING STEERING JACK PIN OUT OF A 488 SCOOP WITH AN AIR WRENCH, WHILE HOLDING THE NUT ON THE BOTTOM WITH A WRENCH, HE ACCIDENTLY PUSHED HIS HAND OVER ON THE BROKEN JACK CUTTING HI S LEFT THUMB.

ROCK FELL FROM TOP HITTING EMPLOYEES R T ANKLE

EMPLOYEE WAS OPERATING OFFSIDE OF PINNER AND HE WAS DRILLING THE HOLE WITH PUSHER AND FINISHER STEEL WHEN THE STEEL BROKE,HITTING HIS RIGHT EYE AND THE AREA AROUND IT.

I.NAME THE OTHER ROOF BOLTER TOLD I.NAME THAT HE WAS GOING TO MOVE THE ROOFBOLTER.STARTED TO BACK UP NOT REALIZING I.NAME WASNT CLEAR OF THE T-BAR.IT HIT EMPL IN THE UPPER BACK(SHOULDER)AREA.

TWISTED MIDDLE (RIGHT) BACK AREA WHILE INSTALLING ROOF BOLT.

EMPLOYEE WAS ROOFBOLTING WHEN A ROCK FELL ON HIS LEFT LEG.

EMPLOYEE WAS ROOFBOLTING AND HE WAS BENDING BOLTS WHEN HE CAUGHT HIS RIGHT HAND BETWEEN THE PLATES AND THE ROOFBOLTER.

EMPL BOLTING TOP AND A ROCK 18"X 18" FELL ON HEAD,SHOULDER AND BACK.

EMPLOYEE STATED THAT HE WAS BACKING UP THE ROOFBOLTER HE WAS HOLDING THE CABLE THE CABLE CAUGHT ON SOMETHING JERKING HIS RT HAND & CUTTING HIS THUMB

EMPLOYEE STATED THAT HE WAS DRILLING A HOLE WITH STEEL AND HE WAS BRINING THE HEAD DOWN WHEN HE REACHED UP TO GET THE DRILL STEEL THE HEAD CAME DOWN THIS SCARED HIM AND HE LET THE HEAD FALL ON HIS LEFT THIGH AND LEG.

ROOFBOLTER RAN OVER LEFT FOOT

EMPLOYEE STATED THAT HE WAS BENDING ROOF BOLTS TO BOLT THE TOP WHEN HIS ELFT SHOULDER BEGAN TO HURT.