Buscar en el registro

Worker obtained a laceration to the left 5th digit while cutting a metal plate. EE was wearing all appropriate PPE including leather gloves. EE did receive sutures.

Employee was using an impact wrench with a socket secured to the impact with a welding rod. While operating the impact the employee's arm was too close to the welding rod cutting employee's forearm.

Tightening the C-frame bolts on the left side of the drag line. The impact torque caught and pinched the right hand between the handrail and the impact cutting a finger that required stitches.

Employee had finished grinding when he felt something in his left eye. Eye was washed out and nothing was found. The next morning the employee complained of his eye and something was found and had to be removed.

Employee was grinding overhead and had some trash get into left eye.

Employee backing up with Dozer on the top of a pile of dirt. As the dozer made the transition over the top of the pile and began its descent, employee was turned in his seat looking back to the direction he was going and the Dozer hit the ground causing a pinching sensation in his lower back.

Operator arrived for work on 12/09/2007 and reported that he had soreness and pain in his shoulder blade area. Operator had been ripping coal in the rib end of the pit and pushing it to the easi-miner to load. He states that he took a good jolt when backing off the coal to make another push. Operator worked all of this day and part of the next before leaving work to see a doctor.

Dragline oiler was removing the pump tray on 101 dragline to repair a leak. The tray was attached to the overhead crane when it was cut loose from the mounting brackets. The tray / motor shifted when it was free causing the oiler's arm to hit the unistrut that was supporting the electrical conduit cutting his R/forearm that required stitches.

Cleaning coal in ramp S2 area, dozer operator backed into a newly dug sump. Operator was wearing his seatbelt and suffered R/shoulder pain due to backing into the 12' sump at night.

Employee was grinding metal on the dragline bucket when a small piece of metal flew under both safety glasses and face shield, lodging in right eye. Employee had the metal removed and was issued a prescription for antibotic eye drops.

EE WAS LIFTING A 55 GALLON BARREL OVER A STEP WITH AN OVERHEAD CRANE WHEN THE LIFTING TONS RELEASED THE BARREL. THE BARREL SAT DOWN ON THE EE'S RIGHT FOOT RESULTING IN 2 BROKEN BONES ON TOP OF THE FOOT.

EMPLOYEE WAS USING A 3/8" HAND DRILL WHEN THE BIT BECAME STUCK. THE DRILL ROTATED OUT OF HIS HAND AND STRUCK THE BACK OF HIS RIGHT HAND RESULTING IN A FRACTURE TO THE 4TH METACARPUS.

EE WAS REMOVING A CUTTER HEAD TIP ONT HE EASI-MINER WITH AN AIR HAMMER. THE LEFT THUMB WAS CAUGHT BETWEEN THE AIR HAMMER AND HEADER RESULTING IN A LACERATION. STITCHES WERE REQUIRED TO CLOSE T HE LACERATION./

EE WAS MAKING REPAIRS TO A TRUCK BED. AREA OF REPAIR HAD BRAKE LINES CLOSE. WHEN EE STARTED USING A NEW GAUGING ROD, THE BACK OF HIS GAUGING ROD ARCED ON THE BRAKE LINE CAUSING A SMALL HOLE. B RAKE FLUID SPRAYED OUT, IGNITED BY THE GAUGING ROD AND BURNING THE EMPLOYEE.

WHILE HOLDING THE BACK UP FOR THE IMPACT REMOVAL OF BOLTS, HIS BACK BECAME STRAINED CAUSING MUSCLE SPASMS.

EE WAS PUSHING A RAMP DOWN THE SPOIL SIDE OF THE PIT. THE DOZER SLID TO THE RIGHT, MADE ONE COMPLETE ROLL AND LANDED ON THE TRACKS. EE EXPERIENCED A FRACTURE TO THE L2-4 TRANSVERSE PROCESS.

WELDER WAS ARGOUGING WHEN A PIECE OF HOT METAL BURNED THROUGH PANTS & FELL INTO BOOT BURING FOOT.

MECHANIC WAS INSTALLING FRONT TIRE ON DRESER END DUMP WITH TIRE MACHINE WHEN THE TIRE WAS RELEASED IT FELL BACK & STRUCK MECHANIC CAUSING A STRAIN TO THE TORSO & UPPER ARM.

GRINDING OVERHEAD IN A TIGHT COMPARTMENT. DID NOT REALIZE ANYTHING IN EYE UNTIL WOKE THE NEXT DAY.

EE WAS WINCHING PUMP SUCTION LINE. WHEN REPOSITIONING HANDS ON THE WINCH CRANK, THE WINCH STOP BROKE LOOSE. THE HANDLE ROTATED BACKWARDS AT HIGH SPEED, HITTING HANDS, JERKED RIGHT ARM.

WELDER BENT OVER TO CUT BANDING ON TEFLON WHIEL WORKING ON HAUL TRUCKS-STRAINED LOWER BACK.

WAS ASSISTING MECHANICS INSTALL BELLY PAN ON CATERPILLAR DOZER WHEN A FOREIGN OBJECT BLEW INTO HIS RIGHT EYE. AN IMPACT WRENCH WAS IN USE AT THE TIME.

EMPLOYEE WAS GRINDING, LIFTED FACE SHIELD WHICH DUMPED GRINDING DEBRIS ON FACE. SAFETY GLASSES & FACE SHIELD WERE BEING USED.

19904OVER BLEW DUST & DIRT PARTICLES AROUND AREA WHERE WELDING. MATERIAL CAME IN BEHIND HOOD.

WELDING ACTIVITIES FOREIGN BODY IN RT EYE

INJURED WAS TRYING TO ENGAGE THE CLUTCH ON A DRILLING RIG.HE LEFT THE RIG IN GEAR WITH THE ENGINE RUNNING.WHILE IN PROCESS OF RIG REPAIR ON A CLUTCH,A LINKAGE THAT ENGAGED THE DRILL HEAD BROKE .THE AUGER EXTENSION STARTED TO ROTATE AND IT HIT HIM IN THE LEG AND ARM AND BROKE HIS ARM.

EMPL LOADING SODA ASH BRIQUETTES INTO CHUTE TO R TREAT C-8 POND.A LARGE CHUNK BECAME LODGED.EMPL CLIMBED DOWN CHUTE WITH A BAR TO DISLODGE IT.THE HOOKS FROM A TRAVELING BLOCK STRUCK EMPL KNOCK ING HIM OFF CHUTE AND INTO POND.HOOK STRUCK EMPL ON LEFT TEMPLE.

INJURED WAS HOLDING A 1 INCH ALL THREAD AS A CO-WORKER TURNED IT WITH AN IMPACT WRENCH.GLOVE WASCAUGHT,TWISITNG INJURED WRIST AND THUMB.

EMPLOYEE WAS OPERATING A 657-E SCRAPER, BECAME STUCK IN THE FILL AREA AND WAS ASSISTED BY A TRACK DOZER. AT ONE POINT, THE INJURED WAS TURNED AND DID NOT EXPECT THE DOZER TO TAG UP. WHEN HE DI D, THE IMPACT WAS SUFFICIENT, IN THE INJURED'S POSITION, TO INJURE HER SHOULDER. INJURED WAS IN THE SCRAPER CAB THROUGHOUT THE OPERATION.

EMPL WAS CHANGING END CUTTING EDGES OF AT 16G MOTORGRADER. HE HAD LOOSED NUT ON ONE BOLT WHEN SQUARE SHOULDER CAME OUT OF SQUARE RETAINER HOLD IN CUTTING EDGE EMPL REACHED AROUND END OF MOLDBO ARD OF BLADE TO PUSH BOLT BACK IN. IN DOING SO HE LEANED AGAINST ARM WHILE HOLDING 1" IMPACT INADVERTENTLY SQUEEZING HANDLE CAUSING BOLT HEAD TO TURN CUTTING FINGER.

EMPLOYEE WAS INJURED WHILE REMOVING BOLTS IN THE DRAGLINE TUB. HE WAS USING AN IMPACT WRENCH BELOW A BOLT WHILE A PORT A POWER WAS PRESSING THE BOLT OUT. THE BOLT REALEASED SUDDENLY AND THE FO RCE OF THE BOLT AND WEIGHT OF THE WRENCH INJUREDTHE EMPLOYEE S WRIST AND FOREARM.

EMPLOYEE WAS REELING IN THE AIR HOSE ON THE LUBE TRUCK THE HOSE STOPPED REELING WHEN THE EMPLOYEE APPROACHED THE REEL TO CHECK IT IT BEGAN REELING AGAIN CAUSING THE AIR HOSE TO WHIP BACK WIT H THE END STRIKING THE EMPLOYEES ELBOW

INJURED WAS CUTTING METAL WITH CUTTING BUG AND CO-WORKER WAS GRINDING SOME METAL WHEN INJURED FELT SOMETHING IN HIS EYE. BOTH INDIVIDUALS WERE WEARING SAFTEY GLASSES AND SHIOELD WHEN THE ACCI DENT OCCURRED.

INJURED WAS WELDING OVERHEAD AND PIECE OF WELDING SLAG GOT INSIDE WELDING HOOD INTO THE RIGHT EYE.

INJURED WAS STANDING ON RIGHT TRACK FRAME, REMOVING TOP BOLTS FROM SPROCKET. HE WAS USING AN IMPACT WRENCH WITH HIS LEFT HAND AND HOLDING A BREAKOVER WITH RIGHT HAND AS A BACK UP THE NUT LOOS ENED OFF AND INJURED WAS APPLYING DOWNWARD PRESSURE ON BREAKOVER INJURED LOST HIS BALANCE WHEN THE NUT LOOSENED AND THE PALM OF HIS RIGHT HAND DX CAME CONTACT WITH THE SHARP EDGE OF THE SPROC

DRAGLINE OPERATOR ON THE GROUND CHECKING TUB FOR SINKING WHILE DRAGLINE WAS SWINGING 360 AS DRAGLINE WAS SWINGING, THE INJURED REPOSITIONED HIS POSITION TO CLEAR SHOE RADIUS. AS HE WAS OBSERV ING THE TUB, THE LOWER FANTAIL LIGHT STRUCK HIM, KNOCKING HIM OFF HIS FEET.

EE WAS PREPARING TO WELD & HE STRUCK HIS ARC BEFORE HE PUT HIS HOOD DOWN COMPLETELY.

UNLOADING A TRUCKLOAD OF STEEL LOADON CRANE SHIFTED INJURED TRIED TO GET AWAY FROM IT & SLIPPED & FELL OFF LOAD.

EE WAS WELDING ON A LADDER. THE LADDER TIPPED OVER & HIT HIM ON THE BACK OF THE HEAD.

EE WAS USING CUTTING TORCH. A PIECE OF SLAG FELL INTO HIS BOOT & BURNED HIS RIGHT FOOT. HE CONTINUED TO WEAR HIS BOOT WITHOUT OBTAINING ANY TREATMENT FOR THE BURN & IT BECAME INFECTED.