While attempting to start a D10 Cat Dozer, a section of the dash board burst causing glass to be blown out and causing a cut on the employee's arm that required the wound to be sutured.
15 de marzo de 2014KY · CarbónOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMAQUINARIA
Two welders were welding on the auger, the injured employee was helping the two welders hold the metal that they were welding. The flash from the welding burned the injured employee's eyes, resulting in his eye sight being limited.
26 de octubre de 2012KY · CarbónOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMAQUINARIA
Employee was changing the chip deflector and replacing a new bit. Employee was using a pipe to unstop the drill bit and the bit blew out rock fragments into the employee arms and chest.
13 de agosto de 2009TN · CarbónSoldador (de taller)MAQUINARIA
Employee was grinding on a piece of metal. While doing so a small piece of metal shaving flew through the side of employee's safety glasses, resulting in the metal shaving embedding in his right eye.
11 de noviembre de 2008TN · CarbónSoldador (de taller)MAQUINARIA
Employee was welding on a 777C Rock Truck Bed, and a piece of Slag flew up and struck the employee below the left eye, causing a mild burn below his eye.
10 de julio de 2008TN · CarbónEncargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campoMAQUINARIA
Employee was tighting roller bolt on D11R dozer, Employee was lying on his back while tighting bolt and socket spun off head of bolt causing metal shavings to fly in employee eye, Employee did have safety glasses on
6 de junio de 2008TN · CarbónOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMAQUINARIA
D9R dozer operator was traveling in reverse and struck a 777C rock truck in the rear, the rock truck was also traveling in reverse. The D9R operator states he didn't see the rock truck as he began to go in reverse, the rock truck driver also states he did not see the D9R dozer through his mirrors as he was traveling in reverse.
18 de octubre de 2007TN · CarbónOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMAQUINARIA
EE was pushing material down to 992D loader with a D9R dozer co. # M37 & the machine's blade slipped off a rock causing a sudden jerk, which resulted in EE having sudden pain in lower abdomen.
24 de agosto de 2007TN · CarbónObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaMAQUINARIA
Employee was tamping dirt in drill hole of a rock approx. 4 ft in height, as He was tamping he twisted his back, causing him to pull a muscle in his back.
11 de enero de 2007TN · CarbónObrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de minaMAQUINARIA
Employee was cutting a pine tree and when the tree fell over, the chainsaw jumped back and struck the employee in the left knee, which resulted in him getting 20 stitches in his knee. 10 inside and 10 outside.
13 de julio de 2006TN · CarbónOperador de barrena helicoidal, Supervisor de cuadrilla de barrenaMAQUINARIA
EE WAS CUTTING BLADE LINER OUT OF D-11 DOZER BLADE. LINER SPRUNG OUT HITTING HIM KNOCKING HIM TO GROUND RESULTING IN BROKEN RIB ON LEFT SIDE OF BODY #8 RIB.
20 de noviembre de 2000TN · CarbónOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMAQUINARIA
EE CLAIMS SMOKE BEING BLOWN BACK IN FACE WHILE WELDING BUCKET ON 992C WAS INHALED & MADE HIM SICK. EE NOTIFIED CO. 4-24 THAT HE WENT TO DR. 4-22& SAID DR. WOULD NOT KNOW CAUSE UNTIL 4-28. UPON RETURN WAS TOLD TEST NOT BACK YET & WAS UNSURE OF CAUSE BUT RELEASED EE TO RETURN 5-1. CLAIMS ADJUSTED PHONE 5- & SAID HE & DR. HAD DECIDED SMOKE INHALATION. EE STILL OUT FOR UNRELATED REASON
28 de noviembre de 1998TN · CarbónOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMAQUINARIA
EE WAS HELPING INSTALL EXHAUST SYSTEM ON DRILL. EE WAS HOLDING HAND WRENCH WHILE A SECOND EE WAS USING AN AIR WRENCH. AIR FROM AIR WRENCH CAUSED PIECE OF METAL TO GO INTO EYE.
23 de febrero de 1994KY · CarbónOperador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operadorMAQUINARIA