Buscar en el registro

Employee was injured when the bulldozer he was operating overturned onto its right side.

Employee stated that he backed his dozer over a rock and jarred his back. Employee did not begin missing work until 9/26/12.

Employee was injured when the dozer he was operating overturned.

Employee pinched his right hand in the drill entrance door, resulting in a laceration that required (4) sutures.

EE was running a hydraulic power cutter, got his hand caught in the hydraulic cylinder causing amputation of left thumb and mutilated his index finger.

EMPLOYEE WAS PREPARING TO REMOVE UPPER SEGMENT BOLTS ON D10 DOZER WHILE POSITIONING AN AIR TORQUE WRENCH SOCKET ONTO ONE OF THE BOLTS WITH HIS LT. HAND, THE TORQUE WRENCH TRIGGER INADVERTENTLY STRUCK THE SEGMENT CAUSING THE WRENCH TO TURN ON. FINGERS WERE PINCHED BETWEEN THE TORQUE WRENCH BRACE & THE MACHINE SPROKET.

EMPLOYEE WAS CUTTING A TREE WHEN AN UNSEEN GRAPEVINE IN THE TOP OF THE TREE PULLED A DEAD LIMB (6' BY 8") ON HIM, BRUISING HIS SHOULDER AND RIBS.

EMPLOYEE "ALLEGES" THAT HE STRAINED HIS KNEE WHEN A TRUCK HIT THE RIPPER OF HIS GRADER. ON 9/17 DOCTOR'S OFFICE (BONE SPECIALIST) INFORMED EMPLOYER THAT EMPLOYEE HAD RECEIVED MEDICAL TREATMENT TO THIS SAME KNEE ON 5/16/02, 7/16/02, 8/27/02, 12/30/02, 3/25/03, 6/24/03, AND 8/26/03 BUT THE 7TH VISIT WAS DETERMINED TO BE DUE TO THE 8/21 INCIDENT.

IN BACK OF ROCK TRUCK SHEET OF METAL BEING LIFTED BY CRANE-CHAIN BROKE AND SHEET OF METAL FELLOW BOTH LEGS INJURED RT FOOT FRACTURED.

EE FELL FROM DRILL OPERATOR'S SEAT TO THE FLOOR OF CAB. EE WAS INITIALLY TREATED & RELEASED FOR WORK BUT FAILED TO REPORT TO WORK ON JUNE 24TH (AFTER VACATION PERIOD).

AFTER CUTTING MATERIAL AWAY FROM A BIG ROCK EE BACKED DOZER AWAY FROM ROCK TO LET THE DUST CLEAR. THE ROCK THEN UNEXPECTEDLY ROLLED BACK INTO THE DOZER BLADE, JARRING THE OPERATOR. BEGAN MISSI NG WORK ON 4-2-02.

EMPLOYEE BEGAN MISSING WORK ON 4/26/01 FROM COMPLICATIONS OF 9/20/00 WHEN HOT METAL SLAG POPPED INTO HIS EAR.

EE WAS TRAMMING DOZER UP-SLOPE WHEN HE RAN OVER A ROCK AND JARRED HIS BACK.

EE HAS REPORTED THAT ON 6-1-99, WHILE DRIVING HOME FROM WORK HE EXPERIENCED ELEVATED BACK PAIN AND STOPPED AT A HOSPITAL. HIS TREATING DR., HAS ONCE AGAIN RESTRICTED THE EE FROM PERFORMING HIS NORMAL DUTIES. ON 6-15-99, MGMT. RECEIVED NOTESFROM THE DR. INDICATING THAT THE EE HAS BEEN UNDER HIS CARE/TREATMENT (TENS UNIT AND MEDICATION) FOR COMPLAINTS OF BACK PAIN ON A REGULAR BASIS

WHILE CUTTING BROKEN BOLTS OUT OF ROLLER FRAME EYES WERE IRRITATED, HAD SOMETHING IN THEM

EMPLOYEE WAS OPERATING A TRUCK THAT WAS STRUCK FROM BEHIND BY THE BUCKET OF THE P & H 4100 SHOVEL AS HE WAS WAITING TO BE LOADED.

EE RAN DOZER OVER SMALL BOULDER WHILE WORKING SLURRY CELLS. THIS CARRED HIM FORWARD & UP SLIGHTLY INTO AN ONLY C.B. BRACKET.

WHILE WORKING OVERHEAD IN CONFINED AREA EE WAS ATTEMPTING TO TIGHTEN 2 1/2" PROPEL CASE BOLT WITH 1" AIR IMPACT, THE BOLT HEAD BROKE ALLOWING THE IMPACT TO RIDE ACROSS METAL PLATING & THEN DOW N EE'S FACE - R CHEEK AREA.

EMPLOYEE FELT HE HAD GOTTEN FLASH BURNS TO HIS EYES WHILE WORKING WITH & AROUND WELDERS. (MUST HAVE OCCURRED SOMETIME BETWEEN 4PM.-3AM. ; 7/13 &7/14

EE WAS TRAMMING A DRILL OFF THE 2ND CONTOUR BENCH TO GET FUEL. AS HE MANEUVERED THE CAB BY A ROCK IN THE BENCH WALL, HIS OUTER TRACK PUSHED AWAY THE OUTER EDGE OF THE BENCH. THE DRILL SLID ABO UT HALFWAY DOWN THE 12' EMBANKMENT & THEN FLIPPED "NEARLY" TO THE UPSIDE DOWN POSITION.

EE WAS PUSHING WITH DOZER & BACKED OVER LARGE BOULDER & SLID INTO HOLE CAUSING WHIPLASH TO NECK.

EMPLOYEE STATED THAT WHILE BACKING UP DOZER, HE RAN OVER A BUMP IN THE SHOVEL PIT AND JARRED HIS NECK.

PUSHING MATERIAL DOWNSLOPE WHEN L TRACK RAN UP ON LARGE ROCK TIPPLING DOZER SIDEWAYS L SIDE OF EE HEAD WAS CUT WHEN IT STRUCK THE SIDE WINDOW LATCH.

EMPLOYEE STATED THAT WHILE BACKING UP DOZER, IT WENT OVER A ROCK AND DROPPED DOWN ONTO SOLID MATERIAL - JARRING BACK.

WHILE ATTEMPTING TO PULL SHOVEL CABLE OUT OF GROOVE IN DRUM CABLE RELEASED SUDDENLYALLOWING EMPLOYEE TO FALL AGAINST METAL BRACE

EMPLOYEE STATED HE WAS TURNED AROUND LOOKING BACKWARD WHEN HIS DOZER LANDED SOLIDLY AFTER DROPPING OVER A SMALL ROCK.

AS EMPLOYEE WAS BACKING UP GRADER. HE RAN INTO A BERM, JARRING HIS BACK AND NECK. BEGAN MISSING WORK ON 12-30-91.

ARM ON WHEEL PULLER FLEW OFF UNDER PRSSURE & DTRUCK EMPL ON UPPER LIP.

WHILE REACHING FROM CAB AREA TO DRILL STEEL, EMPLOYEE TRIED TO PULL THE STEEL INTO THE CAROUSEL RACK.

WHILE STEAM CLEANING DOZER, EMPLOYEE WAS KNOCKED TO GROUND FROM SUDDEN RELEASE OF PRESSURE THAT HAD BUILT UP IN STEAM JENNY HOSE.

PIECE OF ROCK HIT SHOVEL CAB CAUSING WINDSHIELD TO JAR OUT, STRIKING EE S HEAD.

EMPLOYEE STATES THAT CONDUCTING WELDING OPERATIONS FROM A KNEELING POSITION HAS CAUSED SWELLING IN HIS RIGHT KNEE.BEGAN MISSING TIME 02-08-91.

WHILE REMOVING CLAMPS FROM HOIST CABLE OF DRAGLINE WITH IMPACT WRENCH,EMPLOYEE GOT HIS FINGER CAUGHT BETWEEN WRENCH AND FLOOR.

WHILE TURNING GRADER AROUND BACKING UP LOOKING BEHIND,HIT A HOLE IN ROAD.FELT SHARP PAIN IN NECK AND SHOULDER.

EMPL WAS USING AN AIR IMPACT WRENCH TO TIGHTEN THE MAST HEAD COUPLING BOLTS ON A DRILL WHEN THE AIR HOSE CAME LOOSE AND PULLED EMPL ARM SUDDENLY

LARGE ROCK FELL FROM SHOVEL BUCKET STRIKING CAB PROTECTOR OF ROCK TRUCK JARRING OPERATOR.

I NAME WAS WELDING ON DECK DURING THIS ACTIVITY A HOT PIECE OF SLAG ALLEGEDLY FELL INTO HIS LEFT EAR.

I NAME WAS WORKING IN OPERATORS CAB HE HAD A PRPANE TORCH INSIDE A WELDING ROD CAN FOR HEAT HE ALLEGEDLY BECAME SICK FROM THE FUMES.

EMPLOYEE SPRAINED (L) WRIST WHILE PINNING TOP.

I NAME WAS GRINDING OVERHEAD ON GANTRY HE ALLEGEDLY TWISTED HIS BACK WHEN GRINDER HUNG UP.

I.NAME WAS DRILLING OVERHEAD AT 1:00 AM 11-15-88 A FOREIGN OBJECT EMBEDDED ITSELF IN HIS RT EYE

EMPLOYEE WAS INPROCESS OF TAKING DOWN ROOF BOLTER CABLE WITH ANOTHER EMPLOYEE WAS TRAMMING THE ROOF BOLTER OUT OF THEHEADING. OTHER EMPLOYEE STATED THE CABLE TAKE-UP REEL VALVE STRUCK IN CAUS ING THE CALE TO STRIKE HIM ACROSS THE CHEST AND THROWING HIM ACROSS THE ENTRY.

I,NAME WAS DRILLING OVERHEAD WITH MAGNETIC BASE DRILL THE DRILL BIT HUNG CAUSING THE MAGNETIC BASE TO BREAK LOOSE, AND HITTING HIM IN HIS RIGHT ELBOW.

THE INJURED BURNT HIS EYE WHILE WELDING ON BOOM,DUE TO A SMALL CHIP IN HIS WELDING LENS THAT WENT UNDETECTED THROUGH HIS WHOLE SHIFT ON 10-27-88.HE DID NOT NOTICE HIS EYE WAS BURNT UNTIL 11-28 -88.HE WORKED UNTIL 10:00PM ON 11-28-88.

INJ WS TAKING A WELDING TEST WHILE CLEANING OFF HIS WELD WITH A DIE GRINDER THE DISK WENT THROUGH HIS WELDING HOODAND SAFEYT GLASSES INJ HAS LACERATIN TO L. EYE.

EMPLOYEE'S LEFT3ARM-WHICH WAS ON THE CABLE ARM TO THE CONTINUOUS MINER-WAS CAUGHT AGAINST MINE ROOF WHEN THE MINE DECK WENT OVER A ROLL IN THE MINE FLOOR.

EMPLOYEE WAS IN8TALLING A ROOF-BOLT NEAR THE RIB OF A RIGHT HAND BREAK AND LEFT THE PINNER BOOM DOWN ON TOP OF HIS RIGHT KNEE.

BEGAN MISSING 7IME ON 7-17-87 CHEMICAL BRONCHITITIS DOE TO INHALATION FO FUMES.