Employee stated that they were walking in the plant and their head struck a water valve. This caused pain in their head and neck.
Fanco: 575 citaciones de la MSHA Coal
Fanco tiene $193K en multas propuestas de MSHA y $4K pendientes en 23 expedientes impugnados, ademas del muestreo de salud y el registro completo de incidentes.
Seguir esta mina
Avísenme cuando se presente un nuevo incidente de la MSHA en Fanco.
- Muertes
- 0
- Incidentes totales
- 64
- Años en registro
- 1989–2019
- Último incidente
- Oct 2019
ⓘ
Esta tasa son las citaciones registradas divididas entre las horas de inspección de la MSHA, por cada 100 horas. Refleja el esfuerzo de inspección, no el tamaño de la mina ni la producción.Fanco tiene $193K en multas propuestas de MSHA y $4K pendientes en 23 expedientes impugnados.
ⓘ
Las diferencias entre las multas propuestas y las pagadas reflejan tanto acuerdos y reducciones en conferencia como montos aun adeudados. Pendiente es el saldo que se debe actualmente.ⓘ
Las proporciones se calculan sobre las citaciones que llevan la codificación de gravedad y negligencia de la MSHA; una pequeña parte de los registros no está codificada.ⓘ
Impugnar una citación ante la Comisión Federal de Revisión de Seguridad y Salud Minera es un derecho legal. Estas cifras presentan los resultados públicos de ese proceso, según el archivo de Violaciones Impugnadas de MSHA.- Conciliadas 177 · 90%
- Quedaron como emitidas 16 · 8%
- Anuladas o retiradas 4 · 2%
ⓘ
Una citación Significativa y Sustancial cuenta como sobreviviente cuando la conciliación o la decisión del juez mantuvo la designación, o cuando la impugnación fue desestimada o quedó en rebeldía y la citación quedó como emitida. Las citaciones anuladas o retiradas, y las conciliaciones que quitaron la designación, cuentan en contra.ⓘ
Una reducción o desestimación ante la Comisión es un resultado legítimo de impugnar una multa propuesta. Las cifras son el monto propuesto y el monto confirmado en la decisión del expediente.| Expediente | Decisión | Juez | Año | Propuesta / confirmada |
|---|---|---|---|---|
| WEVA 2020-0024 | Settlement | 2020 | $29K → $17K | |
| WEVA 2019-0445 | Settlement | Rae | 2019 | $20K → $15K |
| WEVA 2019-0623 | Settlement | Sullivan | 2021 | $19K → $15K |
| WEVA 2019-0693 | Settlement | Moran | 2020 | $16K → $9K |
| WEVA 2020-0137 | Settlement | 2020 | $11K → $6K | |
| WEVA 2017-0550 | Default | Lesnick | 2017 | $10K → $10K |
El muestreo de MSHA en Fanco muestra que 100% de 243 muestras de polvo respirable de carbón cumplieron el estandar de 1.5 mg/m3.
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.Polvo respirable de carbón
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.
Última medición: 2019-09-09, hace 6 años
ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.ⓘ
El valor de concentración excesiva (ECV) es el umbral de aplicación por muestra de la propia MSHA, que incorpora la incertidumbre de medición; una muestra por encima de su ECV puede motivar una citación. El conteo cubre solo las muestras a las que MSHA asignó un ECV.- BULLDOZER OPERATOR116
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE26
- TIPPLE OPERATOR20
Ruido
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.
Última medición: 2019-08-27, hace 6 años
ⓘ
La proporción cuenta las muestras de ruido cuya dosis medida superó el límite permisible de exposición de 90 dBA. Describe el lugar de trabajo muestreado, no lo que llegó al oído del minero: los programas de conservación de la audición y la protección auditiva usada durante el turno se registran por separado y no se reflejan aquí.- BULLDOZER OPERATOR29
- REFUSE TRUCK DRIVER/BACKFILL TRUCK DRIVE14
- ELECTRICIAN10
ⓘ
Una muestra es una medición de cumplimiento en un momento dado, no un historial de exposición individual. Estas cifras describen registros de muestreo de MSHA y no establecen causalidad ni dosis personal.ⓘ
Las cifras de polvo respirable de carbón y sílice corresponden a instalaciones de carbón. El cumplimiento del polvo se mide frente a la norma actual de 1.5 mg/m3; se incluyen muestras anteriores a la norma de 2014, por lo que las tasas de cumplimiento son una senal historica aproximada.| Año | dentro de 1.5 mg/m3 | muestras |
|---|---|---|
| 2019 | 100% | 22 |
| 2018 | 100% | 18 |
| 2017 | 100% | 31 |
| 2016 | 100% | 22 |
| 2015 | 100% | 7 |
| 2014 | 100% | 9 |
| 2013 | 100% | 18 |
| 2012 | 100% | 10 |
| 2011 | 100% | 10 |
| 2010 | 100% | 10 |
| 2009 | 100% | 10 |
| 2008 | 100% | 11 |
| 2006 | 100% | 3 |
| 2005 | 90% | 10 |
| 2004 | 100% | 9 |
| 2003 | 100% | 9 |
| 2002 | 100% | 14 |
| 2001 | 100% | 10 |
| 2000 | 100% | 10 |
| Año | sobre el LPE | muestras |
|---|---|---|
| 2019 | 0% | 5 |
| 2017 | 0% | 15 |
| 2016 | 0% | 5 |
| 2015 | 0% | 4 |
| 2014 | 0% | 8 |
| 2013 | 0% | 5 |
| 2012 | 0% | 10 |
| 2011 | 17% | 6 |
| 2010 | 20% | 5 |
| 2009 | 20% | 5 |
| 2008 | 0% | 3 |
| 2004 | 0% | 5 |
| 2003 | 0% | 5 |
| 2001 | 50% | 6 |
| 2000 | 0% | 4 |
Fanco registró 6.84 casos de lesión reportables por cada 100 trabajadores a tiempo completo en 2019.
ⓘ
Esta tasa son los casos de lesión reportables por cada 100 trabajadores a tiempo completo por año, calculada como 200,000 por los casos dividido entre las horas-empleado reportadas por el operador a la MSHA. Los casos son lesiones que la MSHA clasificó en grado 01 a 07; se excluyen los eventos de solo accidente que no lesionaron a nadie, y también las lesiones de contratistas, cuyas horas no corresponden a una sola mina. Las tasas comienzan en el año 2000, cuando inicia el reporte trimestral de empleo, y se omiten por debajo de 20,000 horas en un año.| Año | tasa de casos totales | días perdidos | mortales |
|---|---|---|---|
| 2019 * | 6.84 | 6.84 | 0.000 |
| 2018 | 3.45 | 3.45 | 0.000 |
| 2017 * | 4.51 | 4.51 | 0.000 |
| 2016 * | 5.80 | 5.80 | 0.000 |
| 2013 * | 2.65 | 2.65 | 0.000 |
| 2012 * | 0.00 | 0.00 | 0.000 |
| 2011 * | 2.08 | 0.00 | 0.000 |
| 2010 * | 2.11 | 2.11 | 0.000 |
- Amherst Coal Company 1950 a 1982
- Amherst Coal Company 1982 a 1987
- Apogee Coal Company LLC 1987 a 2015
- Guyandotte Mining, LLC 2015 al presente
| Año | Empleados |
|---|---|
| 2026 | 0 |
| 2025 | 2 |
| 2024 | 2 |
| 2023 | 2 |
| 2022 | 2 |
| 2021 | 0 |
| 2020 | 1 |
| 2019 | 36 |
| 2018 | 48 |
| 2017 | 39 |
| 2016 | 17 |
| 2015 | 5 |
| 2014 | 6 |
| 2013 | 25 |
| 2012 | 31 |
| 2011 | 32 |
| 2010 | 32 |
| 2009 | 32 |
| 2008 | 33 |
| 2007 | 33 |
| 2006 | 33 |
| 2005 | 33 |
| 2004 | 35 |
| 2003 | 38 |
| 2002 | 43 |
| 2001 | 42 |
| 2000 | 41 |
Fanco se ubica en Logan County, West Virginia, donde la categoría minera del Censo representa el 6.6% del empleo del condado.
ⓘ
Las cifras del condado provienen de la Encuesta sobre la Comunidad Estadounidense de la Oficina del Censo de EE. UU., estimaciones quinquenales agrupadas, por lo que la edición de 2023 abarca de 2019 a 2023. La categoría del Censo es 'minería, explotación de canteras y extracción de petróleo y gas', que es más amplia que la jurisdicción de la MSHA e incluye a trabajadores de petróleo y gas que ninguna mina emplea. Estas cifras describen el condado circundante, no esta mina, y no son un factor en ningún incidente específico.ⓘ
Citaciones por millón de horas-empleado reportadas. Las tasas comienzan en el año 2000, cuando inician los datos trimestrales de empleo de la MSHA; los incidentes anteriores se cuentan pero no pueden ajustarse por tasa. Los trimestres con menos de 100,000 horas reportadas se muestran en gris: muy pocas horas para una tasa estable.| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2026 Q2 | 0 | 0 | 0 | |
| 2026 Q1 | 0 | 0 | 0 | |
| 2025 Q4 | 67 | 0 | 0 | 0.0 |
| 2025 Q3 | 378 | 0 | 0 | 0.0 |
| 2025 Q2 | 392 | 0 | 0 | 0.0 |
| 2025 Q1 | 390 | 0 | 0 | 0.0 |
| 2024 Q4 | 422 | 0 | 0 | 0.0 |
| 2024 Q3 | 406 | 0 | 0 | 0.0 |
Mostrar 98 trimestres anteriores Ocultar trimestres anteriores
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2024 Q2 | 430 | 0 | 0 | 0.0 |
| 2024 Q1 | 410 | 0 | 0 | 0.0 |
| 2023 Q4 | 650 | 0 | 0 | 0.0 |
| 2023 Q3 | 130 | 0 | 0 | 0.0 |
| 2023 Q2 | 130 | 0 | 0 | 0.0 |
| 2023 Q1 | 120 | 0 | 0 | 0.0 |
| 2022 Q4 | 130 | 0 | 0 | 0.0 |
| 2022 Q3 | 132 | 0 | 0 | 0.0 |
| 2022 Q2 | 156 | 0 | 0 | 0.0 |
| 2022 Q1 | 0 | 0 | 0 | |
| 2021 Q4 | 0 | 0 | 0 | |
| 2021 Q3 | 0 | 0 | 0 | |
| 2021 Q2 | 0 | 0 | 0 | |
| 2021 Q1 | 0 | 0 | 0 | |
| 2020 Q4 | 10 | 0 | 0 | 0.0 |
| 2020 Q3 | 452 | 0 | 0 | 0.0 |
| 2020 Q2 | 0 | 0 | 0 | |
| 2020 Q1 | 480 | 0 | 0 | 0.0 |
| 2019 Q4 | 12,881 | 2 | 0 | 155.3 |
| 2019 Q3 | 23,448 | 94 | 12 | 4008.9 |
| 2019 Q2 | 24,177 | 19 | 5 | 785.9 |
| 2019 Q1 | 27,186 | 20 | 8 | 735.7 |
| 2018 Q4 | 25,253 | 0 | 0 | 0.0 |
| 2018 Q3 | 28,159 | 9 | 0 | 319.6 |
| 2018 Q2 | 27,144 | 36 | 6 | 1326.3 |
| 2018 Q1 | 35,388 | 55 | 11 | 1554.2 |
| 2017 Q4 | 17,532 | 42 | 8 | 2395.6 |
| 2017 Q3 | 23,778 | 3 | 1 | 126.2 |
| 2017 Q2 | 21,326 | 53 | 16 | 2485.2 |
| 2017 Q1 | 26,136 | 11 | 5 | 420.9 |
| 2016 Q4 | 12,470 | 2 | 0 | 160.4 |
| 2016 Q3 | 10,197 | 2 | 0 | 196.1 |
| 2016 Q2 | 7,328 | 11 | 2 | 1501.1 |
| 2016 Q1 | 4,508 | 1 | 0 | 221.8 |
| 2015 Q4 | 738 | 0 | 0 | 0.0 |
| 2015 Q3 | 3,220 | 4 | 0 | 1242.2 |
| 2015 Q2 | 3,514 | 0 | 0 | 0.0 |
| 2015 Q1 | 3,399 | 0 | 0 | 0.0 |
| 2014 Q4 | 3,416 | 3 | 1 | 878.2 |
| 2014 Q3 | 3,628 | 0 | 0 | 0.0 |
| 2014 Q2 | 3,990 | 14 | 9 | 3508.8 |
| 2014 Q1 | 4,365 | 1 | 0 | 229.1 |
| 2013 Q4 | 17,012 | 0 | 0 | 0.0 |
| 2013 Q3 | 17,428 | 1 | 0 | 57.4 |
| 2013 Q2 | 20,182 | 7 | 1 | 346.8 |
| 2013 Q1 | 20,732 | 12 | 1 | 578.8 |
| 2012 Q4 | 17,607 | 0 | 0 | 0.0 |
| 2012 Q3 | 20,601 | 4 | 2 | 194.2 |
| 2012 Q2 | 22,006 | 0 | 0 | 0.0 |
| 2012 Q1 | 23,749 | 6 | 1 | 252.6 |
| 2011 Q4 | 22,205 | 0 | 0 | 0.0 |
| 2011 Q3 | 23,684 | 10 | 3 | 422.2 |
| 2011 Q2 | 25,140 | 0 | 0 | 0.0 |
| 2011 Q1 | 25,294 | 7 | 3 | 276.7 |
| 2010 Q4 | 23,953 | 0 | 0 | 0.0 |
| 2010 Q3 | 22,453 | 6 | 4 | 267.2 |
| 2010 Q2 | 23,922 | 0 | 0 | 0.0 |
| 2010 Q1 | 24,428 | 6 | 2 | 245.6 |
| 2009 Q4 | 21,651 | 0 | 0 | 0.0 |
| 2009 Q3 | 22,006 | 6 | 0 | 272.7 |
| 2009 Q2 | 23,953 | 0 | 0 | 0.0 |
| 2009 Q1 | 23,222 | 1 | 0 | 43.1 |
| 2008 Q4 | 22,976 | 0 | 0 | 0.0 |
| 2008 Q3 | 23,854 | 0 | 0 | 0.0 |
| 2008 Q2 | 24,924 | 5 | 1 | 200.6 |
| 2008 Q1 | 25,461 | 5 | 4 | 196.4 |
| 2007 Q4 | 23,624 | 0 | 0 | 0.0 |
| 2007 Q3 | 20,713 | 0 | 0 | 0.0 |
| 2007 Q2 | 24,556 | 0 | 0 | 0.0 |
| 2007 Q1 | 26,016 | 0 | 0 | 0.0 |
| 2006 Q4 | 23,678 | 0 | 0 | 0.0 |
| 2006 Q3 | 22,029 | 0 | 0 | 0.0 |
| 2006 Q2 | 24,965 | 5 | 2 | 200.3 |
| 2006 Q1 | 24,350 | 0 | 0 | 0.0 |
| 2005 Q4 | 22,297 | 0 | 0 | 0.0 |
| 2005 Q3 | 20,969 | 2 | 0 | 95.4 |
| 2005 Q2 | 22,008 | 0 | 0 | 0.0 |
| 2005 Q1 | 22,867 | 0 | 0 | 0.0 |
| 2004 Q4 | 20,959 | 0 | 0 | 0.0 |
| 2004 Q3 | 23,654 | 0 | 0 | 0.0 |
| 2004 Q2 | 23,467 | 0 | 0 | 0.0 |
| 2004 Q1 | 22,173 | 4 | 0 | 180.4 |
| 2003 Q4 | 18,699 | 0 | 0 | 0.0 |
| 2003 Q3 | 21,961 | 5 | 2 | 227.7 |
| 2003 Q2 | 26,482 | 0 | 0 | 0.0 |
| 2003 Q1 | 26,427 | 5 | 2 | 189.2 |
| 2002 Q4 | 26,855 | 0 | 0 | 0.0 |
| 2002 Q3 | 28,154 | 2 | 0 | 71.0 |
| 2002 Q2 | 27,950 | 0 | 0 | 0.0 |
| 2002 Q1 | 27,927 | 6 | 0 | 214.8 |
| 2001 Q4 | 26,480 | 2 | 0 | 75.5 |
| 2001 Q3 | 26,453 | 2 | 1 | 75.6 |
| 2001 Q2 | 27,185 | 2 | 0 | 73.6 |
| 2001 Q1 | 25,883 | 0 | 0 | 0.0 |
| 2000 Q4 | 24,478 | 5 | 1 | 204.3 |
| 2000 Q3 | 23,117 | 0 | 0 | 0.0 |
| 2000 Q2 | 25,707 | 6 | 1 | 233.4 |
| 2000 Q1 | 27,659 | 5 | 5 | 180.8 |
Incidentes reportables
64 en archivo2019 · 3 incidentes
Employee stated was attempting to locate a rattle on the 992 G End loader when employee stepped on a loose platform. This caused employee to lose balance and fall causing pain in right shoulder, right arm, right leg, and lower back. Employee was taken off work by a physician.
Employee stated that while climbing up into the 240 long boom excavator, employee felt a pull and sharp pain in right bicep.
2018 · 2 incidentes
Employee was attempting to fuel the D8 Dozer while standing on the crawlers. EE slipped and fell off the crawlers which caused pain in both legs. Employee was diagnosed with contusions and taken off work for 4 days.
Employee stated that EE was operating the dozer on the Raw Coal Stockpile when EE felt a pain in neck. Employee stated that EE felt pain when EE turned to look behind EE while backing the dozer up.
2017 · 2 incidentes
As employee was exiting the D10 Dozer at the platform, EE slipped and struck right knee against the frame of the platform. This caused a laceration to right knee requiring sutures.
Employee stated that while pushing refuse with a D9N Dozer, the dozer trammed over an offset in the material causing employee's neck to jar. this resulted in pain in employee's neck and right shoulder. The employee missed one scheduled work day and returned to work with a full release.
2016 · 1 incidente
Employee was carrying a hydraulic jack and dropped it and attempted to catch the jack. When EE did, felt a muscle pull resulting in a torn bicep.
2013 · 1 incidente
Employee strained his lower back while reaching for a water hose.
2012 · 1 incidente
Employee was changing a hydraulic hose on a Caterpillar D8 Bull Dozer, in the process of tightening the "C" flange clamp on the SAE Code 62, Caterpillar, 4-bolt flange, his wrench slipped causing him to hyper-extend his right arm, he felt a pop in his right shoulder tearing his rotator-cuff/the rotator cuff tendon/glenohumeral joint
2011 · 1 incidente
Employee's finger was pinched between two compressed gas cylinders.
2010 · 1 incidente
Employee stated that his loaded haul truck slid into the ditch along the haul road during icy road conditions and he strained his lower back while holding on to the steering wheel. He finished his shift on the day of the incident, returned to work the next day and completed that work shift. Medical records were obtained on 3/22/10. Incident is under investigation.
2009 · 4 incidentes
This person has filed an occupational Pneumoconiosis claim with Brickstreet Mutual Ins. His last project assignment was at Apogee Coal's Fanco Plant.
Employee was using a slate bar to free up a lump of coal that was stuck in the feeder area. The coal released suddenly and the slate bar struck the employee's left thumb, resulting in a laceration and fracture.
Employee was wakling down a grated walkway. The grating was wet and he slipped and landed on his knee. He did not report the injury until 5/28/09 and didn't seek treatment until 6/12/09.
Employee states that he stepped on a piece of metal and slipped scraping his left knee and causing fluid build-up and bruising when he fell. Employee continued working his shift and did not seek medical treatment until 2/7/09 when he was put on restricted duty.
2008 · 3 incidentes
Employee was walking down a slope to his work area. He was carrying some rebar. The ground was wet and he lost his footing. He strained his Right Ankle, Right Hip, and back.
Employee suffered a fracture to his left foot when he was struck by a crusher motor. The motor shifted and dropped as it was being hoisted.
Employee was using a slate bar to pry a lodged piece of metal loose in the raw coal chute to the #2 raw coal vibrator. The bar slipped, allowing his hand to strike against the flop-gate lever on the plant feed belt discharge chute.
2007 · 1 incidente
Bending metal plate on truck bed, while swinging the sledge hammer, something in lower stomach pulled.
2004 · 2 incidentes
Employee was coming down from loadout while it was snowing and expresses he slipped and fell upon his arm striking his right elbow. Employee was unattentive to his working conditions and failed to use proper points of contact.
OCCUPATIONAL ILLNESS/DISEASE. HEARING LOSS CLAIM.
2003 · 1 incidente
OCCUPATIONAL DISEASE HEARING LOSS CLAIM
2002 · 4 incidentes
OCCUPATIONAL ILLNESS. OCCUPATIONAL PNEUMOCONIOSIS.
OCCUPATIONAL PNEUMOCONIOSIS CLAIM.
OCCUPATIONAL ILLNESS OCCUPATIONAL PNEUMOCONIOSIS CLAIM DIAG. REC. 4/11/02.
OCCUPATIONAL ILLNESS. CARPAL TUNNEL SYNDROME CLAIM.
2001 · 11 incidentes
OCCUPATIONAL ILLNESS HEARING LOSS CLAIM DIAGNOSIS RECEIVED 10/26/01.
OCCUPATIONAL ILLNESS. HEARING LOSS CLAIM. CLAIM RECEIVED 10-04-01.
OCCUPATIONAL ILLNESS: CARPAL TUNNEL CLAIM. DIAGNOSIS RECEIVED 9/27/01.
OCCUPATIONAL ILLNESS HEARING LOSS CLAIM.
OCCUPATIONAL ILLNESS PNEUMOCONIOSIS CLAIM DIAGNOSIS REC. 8-23-01.
OCCUPATIONAL ILLNESS CARPAL TUNNEL CLAIM CLAIM RECEIVED 6-27-01.
OCCUPATIONAL ILLNESS. CARPAL TUNNEL CLAIM. CLAIM RECEIVED 6-27-01.
EE WAS WORKING AND TWISTED HIS FOOT ON A ROCK.
OCCUPATIONAL ILLNESS - OCCUPATIONAL PNEUMOCONIOSIS CLAIM - DIAGNOSIS RECEIVED 5-3-01.
EE WAS WALKING ON LOOSE GRAVEL AND TWISTED HIS LEFT ANKLE, FRACTURING IT.
OCCUPATIONAL ILLNESS - HEARING LOSS CLAIM.
2000 · 1 incidente
OCCUPATIONAL PNEUMOCONIOSIS CLAIM. DIAGNOSIS RECEIVED 9/14/00.
1999 · 3 incidentes
OCCUPATIONAL ILLNESS - CARPAL TUNNEL. CLAIM RECEIVED 5-12-00. DIAGNOSIS RECEIVED 6-8-00.
THE EE STATED THAT HE WAS GETTING SLACK IN BELT TO MAKE A SPLICE WHEN HE STRUCK HIS KNEE ON COUNTER BALANCE WEIGHT. EE DID NOT REPORT ACCIDENT UNTIL JULY 1, 1999.
EE WAS DRIVING A WEDGE AND BULL PIN OUT OF COLUMN SPLICE AND IT EJECTED THE WEDGE HITTING THE INSIDE OF LEFT KNEE.
1998 · 3 incidentes
OCCUPATIONAL PNEUMOCONIOSIS CLAIM RECEIVED 6-18-98
OCCUPATIONAL PNEUMOCONIOSIS.
GPF-OCCUPATIONAL PNEUMOCONIOSIS.
1997 · 6 incidentes
EE RAN DOZER OVER SMALL BOULDER WHILE WORKING SLURRY CELLS. THIS CARRED HIM FORWARD & UP SLIGHTLY INTO AN ONLY C.B. BRACKET.
GPF-OCCUPATIONAL HEARING LOSS.
GPF-OCCUPATIONAL PNEUMOCONIOSIS.
EE WAS HITTING REFUSE CHUTE WITH SLEDGE HAMMER, WHEN HEAD OF HAMMER (DURING FORWARD SWING) GLANCED OFF A PIECE OF STEEL. THIS CAUSED EE TO LOSE GRIP ON HANDLE ALLOWING H AMMER TO STRIKE A FELLOW-WORKER IN LEFT TEMPLE AREA. FELLOW WORKER WAS APPROX 6' AWAY.
EMPLOYEE WAS WALKING AND FOOT SLIPPED, HE FELL AND LANDED ON DUST CONVEYOR.
EMPOLOYEE REMOVED FILL-PLUG FROM CLEAN-UP PUMP (NOT PUMPING BUT CAVITATING). SCALDING WATER SPRAYED OUT ON HIS NECK AND LEFT HAND.
1996 · 3 incidentes
EE FELL BACKWARDS OFF STEP LADDER APPROX 5' [NOTE: PIECE OF METAL FELL AGAINST LADDER CAUSING EE TO LOOSE HIS BALANCE].
EMPLOYEE REPORTED TO WORK ON 9/27 AND STATED TO SUPERVISOR THAT HE "THOUGHT" HE HAD GOTTEN FLASH BURNS IN HIS (R) EYE. EMPLOYEE SAID HE ALWAYS USED HIS WELDING HOOD BUT MUST HAVE GOTTEN A FLAS H FROM THE BACK OF HIS HOOD WHILE DOING WELDING WORK.
WHILE WALKING DOWN FROST COVERED METAL STEPS AT NEW CRUSHER STATION EE STATED THAT HIS FOOT SLIPPED CAUSING HIS BACK TO TWIST. NOTE DID NOT FALL HOLDING ON RAILING.
1995 · 1 incidente
WHILE HAULING LAST LOAD OF MATERIAL FROM DRAINAGE POND, ON D-BELT AT FANCO LOADOUT, EE APPARENTLY DIED SUDDENLY FROM MASSIVE HEART ATTACK.
1994 · 4 incidentes
EMPLOYEE STATED HE BELIEVES THE HERNIA HE HAD WAS AGGRAVATED ON 8-20-94 WHILE HE WAS WORKING TO UNPLUG A COAL CHUTE SINCE HE FELL SEVERAL TIMES ON WET STEEL BEAM.
EE BUMPED HIS R HAND AGAINST THE 2 RAW COAL CHUTE.
WORKING TO PUT BEARING ON SAMPLE CRUSHER AND WAS TAKING BEARING OFF USING A PIPE WRENCH. WRENCH SLIPPED CAUGHT FINGER BETWEEN WRENCH AND BOLT IN HOPPER.
WAS MOVING FROM ONE POSITION ON WALL FORM TO ANOTHER POSITION ON FORM. UNHOOKED ROPE OF SAFETY BELT & SLIPPED & FELL 20 FEET. FRACTURED LOWER RIGHT LEG & ANKLE IN 3 PLACES.
1993 · 1 incidente
WHILE TAKING QUICK COUPLING FROM 2" PLASTIC WATERLINE THE LOOSENED COUPLING FLIPPED OFF & HIT EMPLOYEE IN MOUTH.
1992 · 1 incidente
WHILE LIFTING A STABILIZER BAR FOR DOZER EMPLOYEE FELT A PAIN IN HIS RIGHT HIP AREA
1990 · 2 incidentes
WHILE LIFTING STABILIZER BAR FOR DOZER EMPL FELT PAIN IN R HIP AREA. WENT TO DR ON 2/21/91 & BEGAN MISSING WORK AT THAT TIME.
EMPLOYEE WAS WALKING AROUND TRANSFER BELT AND SLIPPED AND FELL ON CONCRETE SLAB AT BREAKER BOX STATION.
1989 · 1 incidente
EMPLOYEE WAS CLEANING UP COAL SPILLAGE AT CRUSHER STATION WHEN HE STEPPED ON A LUMP OF COAL CAUSING HIS <R| KNEE TO TWIST