Buscar en el registro

Employee was traveling on a haul road in a water truck when they hit an oversized speed bump and it catapulted them up and they hit the ceiling of the cab. Employee was not wearing a hard hat (no room).

Running loader, feeding plant bouncing in loader repeatedly. Sought treatment for claim on 3/28.

EE initially said it was related to haul road and it is rough. EE later clarified that on 06/24 EE was driving the road and it was bumpy and the air seat bottomed out. EE stated was slammed to the bottom causing back pain. EE noted was worried about a compression type injury. EE did not seek treatment or report until 8/27/2020.

Was in the loader, thinks this occurred on Wednesday 06/10/20, EE hit the corner of a rock with the bucket and it jarred and tweaked EE's low back.

Employee was washing out under feeder when falling debris hit hard hat resulting in bump on head.

Employee was driving haul truck and where the road switches from gravel to asphalt, drove over a pothole which resulted in a discomfort in abdomen. Released to modified duty for 3 days.

Haul truck driver operating 90 Ton haul truck in the pit. Truck went over a dip in the road and the air ride seat failed, causing the seat to bottom out. Cervical Strain, prescription and restricted duty.

Operator was preparing to flip cutting edge on skid steer bucket, bolt started to spin in hole so operator tried to push pin back in square hole. Spinning bolt cut EE's left index finger resulting in 5 stitches. Operator was wearing gloves.

Driving haul truck when steering went out and braced for crash. The brakes were able to stop haul truck to a safe stop. Bracing for crash caused strain to both arms and right foot.

Employee did not stand clear of object when he signaled the boom truck operator to lift up. Resulting in torn skin on two fingers even though he was wearing proper PPE (Gloves)

Off-hwy end-dump truck veered off roadway onto the 8'+ shoulder, struck a buried drainage pipe, traveled up the steep slope adjacent to the shoulder, struck a boulder (approx 5' in dia.) & power pole, turned over onto its driver's side & came to rest on the side of the vehicle with the driver's side of the bed of the truck resting on the boulder.

Employee was operating a CAT End Dump, hauling up a slope when the load shifted to the back causing the front wheels to come off the ground. The load then dumped out and as the truck came back down the employee struck his head causing lacerations on both his lip and right eyelid.

WEATHER DRY AND CLEAR. NO ROADWAY OBSTRUCTIONS TO DRIVER'S VIEW. NO APPARENT TRUCK DEFECTS. NO APPARENT ISSUES WITH FEEDER LAYOUT APPROACH. INJURED WORKER MADE EYE CONTACT WITH TRUCK HAULAGE DRIVER EXITING FEEDER AS REQUIRED. ACCIDENT MAY HAVE RESULTED FROM DRIVER INATTENTION. EXACT IMPAIRMENT UNDETERMINED. DAMAGE TO BLOCK WALL REPAIRED.

WHILE RUNNING LOADER EE HIT BUMP CAUSING INJURY TO BACK AND LEFT LEG. REPORT NOT FILED TIMELY DUE TO LATE RECEIPT OF CLAIM.

EE WAS IN MACK TRUCK BEING LOADED BY A LOADER. WHEN THE LOADER WENT TO DUMP A LOAD OF G ROCK INTO THE DUMP TRUCK, THE WETNESS OF THE MATERIAL CAUSED IT TO COME OUT ALL AT ONCE. THE IMPACT OF THE WET MATERIAL CAUSED THE EE TO GET BOUNCED AROUND INSIDE THE CAB OF THE TRUCK HITTING HER HEAD AGAINST THE DOOR. CAUSATION: POSSIBLY LOADING WET MATERIAL TOO FAST.

WHILE SPREADING GRAVEL WITH LOADER, THE BUCKET DUG INTO THE GROUND AND EMPLOYEE WAS THROWN INTOTHE WINDSHIELD. EMPLOYEE WAS NOT WEARING A SEATBELT.

EMPLOYEE WAS OPERATING 966 CAT WITH THE FRONT END LOADER DIGGING INTO A VERY HARD PILE. THE FORWARD PITCHING MOTION SNAPPED UPPER BODY INJURING LOWER BACK.

NECK BACK & ARM PAIN FROM USING LOADER TO FEED CRUSHER. EE DID NOT REPORT INCIDNET UNTIL 8/19/99

WHILE DRIVING A CAT WAGON IN THE SELAH PIT, EE HIT SOME CONCRETE BLOCKS AND ROLLED TRUCK ONTO ITS SIDE.

EE INJURED BACK WHEN HE WAS DRIVING EQUIPMENT AND WENT OVE POTHOLE IN ROAD CAUSING A JAMMING SENSATION.

WHILE HAULING GRAVEL TO PLANT, THE EMPLOYEE HIT A CONCRETE BLOCK WHICH WAS IN THE ROAD.

REPAIRING HEAD PULLEY SYSTEM WAS LOCED OUT AND EE WAS USING BELT TO TURN PULLEY. EE CAUGHT FINGER BETWEEN PULLEY AND BELT CAUSING BRUISING TO LEFT RING FINGER.

WHILE DRIVING UPHILL TO UNLOAD GRAVEL, THE VEHICLE STALLED AND BEGAN ROLLING BACKWARDS. RIGHT REAR WHEEL HIT STOCK PILE AND TRUCK ROLLED OVER.

DRIVING OTU OF PIT AREA, THE MOTOR STOPPED AND WOULD NTO RESTART. THE TRUCK ROLLED BACKWARDS AND HIT BANK. THE TRUCK THEN PROCEEDED TO ROLL OVER THE BANK. EMPLOYEE WAS WEARING SEAT BELT.

COMMUNICATIONS BETWEEN TWO EE WORKING TOGETHER FAILED AN DCONVEYOR WAS STARTED WHEN EE WAS ON CONVEYOR EE FELL FROM CONVE3YOR AND SPRAINED ANKLE.