Buscar en el registro

Individual was clearing dirt around the plant with a skid loader when loader hit a large rock. This pushed employee forward into the safety bar causing a bruise to chest on the left side. Individual was wearing a seatbelt.

WHILE OPERATING A SKID STEER EMPLOYEE HIT A POT HOLE IN THE ROAD CAUSING IT TO BOUNCE AND JOLTING HIS BACK RESULTING IN PAIN BY THE END OF THE DAY

WHILE CLEANING UP MATERIAL AROUND CRUSHING AND SCREENING PLANT WITH A BOBCAT, A ROCK BOUNCED OFF OF THE SCREEN AND ENTERED THE BOBCAT, HITTING THE OPERATOR ON HIS LEFT KNEE

Cleaning the windshield on loader and twisted back causing a lumbar sprain.

Employee was training belt when return roller grabbed glove. Employee reached for the glove and his hand contacted the roller.

EMPLOYEE INJURED BACK WHILE DRIVING LOADER.

Employee was in Loader and Loader bottomed out causing employee to jar his back

THE OPERATOR HAD BEEN OPERATING HIS FRONT END LOAD ALL MORNING. HE GOT OFF FOR LUNCH AND FOR AN UNKNOWN REASON TOUCHED A RIPPER TOOTH. THE TOOTH WAS VERY HOT AND THE OPERATOR RECEIVED 1ST & 2N D DEGREE BURNS TO HSI HAND.

EE WAS CLEANING UNDER CONVEYOR #5320. HE ASKED THE SKID STEER OPERATOR TO LIFT THE CONVEYOR SO HE COULD PLACE CRIBBING BLOCKS UNDER THE TAIL PULLY MOUNTS. THE OPERATOR THOUGHT EE SIGNALLED HIM TO LOWER THE CONVCEYOR & LOWER IT WHICH PINCHED EE'S THUMB BETWEEN THE CONVEYOR & A BLOCK.

EE HAD FINISHED HIS SHIFT AND WAS LEAVING THE QUARRY. AS HE WAS DRIVING AWAY FROM THE WORK STATION HIS THROTTLE STUCK OPEN. THE SUDDEN ACCELERATION CAUSED EE TO LOSE CONTROL OF HIS VEHICLE. HE SLID INTO THE DITCH WHERE HE THEN ROLLED OVER.

EMPLOYEE WAS OPERATING THE PLANT, HE OPENED THE DOOR OF THE CONTROL ROOM - A ROCK BOUNCED OUT OFA TRUCK, THAT WAS DUMPING INTO THE HOPPER AND STRUCK HIM IN THE TEMPLE.

EMP WAS STANDING ON BELT SHOVELING WHEN THE OPERATOR TURNED THE BELT ON. EMP FELL OFF OF THE BELT INJURING HIS LEG, BRUISING THE BOTTOM PORTION AND KNEE

EE WAS BEING LOADED WHEN A PIECE OF ROCK FLEW IN HER EYE.

EE WAS SHOVELING UNDER CONVEYOR BELT (WEST 6X20) WHEN THE SHOVEL CAUGHT THE BELT AND THE HANDLE HIT HIM IN THE RIGHT SIDE RIB CAGE.

EE WAS OPERATING THE SKIDLOADER AND COMPLAINED OF BACK PAIN.

EMPLOYEE WAS DRIVING A HAUL TRUCK THE LAODER OPERATOR WAS LOADING UP HIS TRUCK & A 10IN BOULDER CAME OFF OF THE LOADER BUCKET STRIKING T HE EMPLOYEES LEFT ELBOW WHICH WAS RESTING ON THE WIKNDO W IT FRACTURED HIS ELBOW

EMPLOYEE DID NOT LOOK IN TRUCK REAR VIEW IN MIRROR TO SEE THAT HE HAD NOT PUT THE BED OF THE DUMP TRUCK DOWN HE TORE DOWN THE SAFETY CHAIN & POKES LOCATED 60 FT FROM THE UPPER PASS HE WAS GOIN G TO GO THRU & IGNORED THE NOISE HE THEN HIT THEUNDERPASS WITH THE RAISED BED OF HIS DUMP TRUCK

HE WAS ADJUSTING THE BELT. IN ORDER TO DO THIS, IT MUST BE MOVING TO CORRECT PROPER TRACKING. I.NAME WENT UP TO THE CONTROL HOUSE AND SHUT OFF THE POWER. HIS ARM WAS 3/4" WAY AROUND. I.NAME TU RNED THE TAIL PULLEY BACKWARDS MANUALLY TO FREE ARM AND THEN HE WAS TAKEN TO THE HOSPITAL.

EE WAS PERFORMING HIS NORMAL DUTIES WHICH INCLUDE CLEAN UP AROUND THE PLANT AND RUNNING A SKID STEER LOADER AND HE FELT A SHARP PAIN IN HIS LEFT SHOULDER.

EMPLOYEE WAS BACKING UP THE SHOP PICK UP TRUCK AND THE FRONT TIRE HIT A ROCK CAUSING HTE STEERING WHEEL TO SPIN VIOLENTLY. HIS THUMB WAS STRUCK BY THE HUB SPOKE IN THE SHTEERING WHEEL.

EMPLOYEE WAS REPAIRING MOTOR AND THE THROTTLE STUCK AND WAS RUNNING WIDE OPEN.

EE CLAIMS THE LOADERMAN DROPPED LOADER BUCKET OF SHOT ROCK INTO THE TRUCK FROM A HIGH ALTITUDE CAUSING THE TRUCK TO BOUNCE SEVERLY. EE CLAIMS TO HAVE BEEN WEARING HIS SEAT BELT, BUT DUE TO TH E SEVERE MOTION OF THE TRUCK HE WAS THROWN AGAINST THE SEAT BACK AND THE STEERING WHEEL. WITNESS STATES TRUCK WAS BACKED INTO LOADING AREA SUCH THAT REQUIRED LOADER TO LOAD OVER CABSHIELD OF T

EMPL WAS DRIVING HAUL UNIT 02 IN QUARRY TO CARRY ROCK FROM STOCKPILE AREA BACK TO PRIMARY CRUSHER. TRUCK ALMOST CRESTED HILL WHEN ENGINE STOPPED & TRUCK BEGAN ROLLING BACKWARD. BRAKES WOULD NO T STOP NOR HOLD LOADED VEHICLE & IT ROLLED IN SEMICIRCLE COMING TO STOP WHEN IT STRUCK ROAD BERM.

DRIVING FORM SSHOP TO OFFIE STRUCK HEAD ON BY TRUCK HAD BEEN DRIVEN ON WRONG SIDE OF ROAD

EMPLOYEE BACKING TRUCK IN TO LOADING AREA FRONT TIRE DROPPED IN A HOLE CAUSING DRIVER TO STRIKE SHIFTER

DRIVER AFTER HAVING DUMPED A LOAD OF SAND IN STOCKPILE FAILED TO LOWER BOX ON HIS TANDEM AXLE TR ISE & STRIKE TOE OF TUNNEL DRIVER FAILED TO DISENGAGE HOIST LEVER BEFORE ENTERING TUNNEL LEVER WAS LOCKED IN UP POSITION DRIVER DID NOT CHECK HIS MIRRORS TO SEE IF BOX WAS DOWN

MATERIAL IS CON8TANTLY SPILLING FROM BELT AND BUILDING UP.EMPLOYEE WAS MUCKING OUT SPILLAGE WITH SHOVEL WHILE BELT WAS LOADED AND RUNNING.MATERIAL STRUCK SIDE OF FRAME OF HOPPER AND FELL FROM BELT STRIKING 9MPLOYEE ON KNEE.

EMPLOYEE WAS GR9ASING TAIL PULLEY OF CONVEYOR BELT WHEN A ROCK BOUNCED OFF THE SCREEN DECK AND STRUCK HIM.

EMPLOYEE ALLLEG9S HE SUFFERED A BACK STRAIN DUE TO OPERATING A FRONT END LOADER OVER ROUGH TERRAIN IN THE PIT AND /OR CHANGING SCREENS ON THE SCREENING PLANT

ONE TRUCK WAS PASSING THROUGH A ONE WAY TUNNEL WHEN THE OTHER TRUCK PULLED INTO TUNNEL WITHOUT LOOKUNG OR RADIO CONTACT THEY MET HEAD ON

EMP WAS DRIVING 4X4 PICKUP OUT OF QUARRY TO LUNCH ROOM AREA ONE OF THE TIRES ON THE STEERING AXLE STRUCK A ROCK CAUSING EMP TO LOSE CONTROL OF STEERING WHEEL

THE PH100 PAYHAULER UNIT 6 HAD BEEN LOADED BUT WOULD NOT PULL THE HILL TO THE CRUSHER AND STARTED TO ROLL BACKWARD THE DRIVER APPLIED THE SERVICE BRAKES INCREASED ENGINE REVOLUTIONS AND SHIFT DOWN TO FIRST GEAR THIS CAUSED THE FRONT OF THE U NIT TO RISE FROM THE ROADWAY AND VEER TO THE SIDE OVER THE ROAD BERM

EMPLOYEE JUMPED OUT OF TRUCK WHEN IT HAD COME OUT OF GEAR AND HE COULD NOT STOP IT OR STEER IT EMPLOYEE WAS EXPERIENCING MINOR BACK DIFFICULTIES BEFORE THE INCIDENT

TRUCK DRIVER PARKED TRUCK WITH BED UP TO DRAIN WHILE ON BREAK. AFTER BREAK DRIVER GOT IN TRUCK, THOUGHT HE HAD PUSHED LEVER TO LOWER THE BED. HE THEN TRIED TO DRIVE INTO A TUNNEL WITH THE BED UP. WHEN THE TRUCK STOPPED AND HE STRUCK HIS HEAD.

COLD WEATHER MADE ICE BUILDUP ON CONVEYORS. EE HAD APPLIED SAND TO UNDER SIDE OF BELT AT TAILPULLEY. SAND FROZE TO TAILPULLEY & EE WAS AFRAID BELT MIGHT RUN TO FAR TO ONE SIDE & RIP. HE APP *%@*% HE ATTEMPTED TO REMOVE SAND BUILDUP BY STRIKING TAILPULLEY WITH SHOVEL. THE SHOVEL CAUGHT IN THE PINCH POINT & PULLED EE AGAINST FRAME.

EMPLOYEE ALLEGES HE DROVE HIS LOADER ACROSS A WASHED OUT PORTION OF THE PIT FLOOR WAS THROWN FROM THE SEAT AND LANDED AGAINST THE ARM REST THE LOADER S EQUIPPED WITH A SEAT BELT BUT IT WAS NO T BEING USED.

EMPLOYEE IS A EUCLID TRUCK DRIVER HAULING SHOT ROCK FROM THE QUARRY TO THE CRUSHER THE CONSTANT BOUNCING DUE TO THE ROUGHNESS OF THE RIDE ALLEGEDLY ENDED WITH EMPLOYEE HAVING BACK TROUBLE

DRIVING R-30 EUCLID,UNIT 10,HAULING SHOT ROCK FROM QUARRY TO CRUSHING PLANT.

ATTACHED REPORT - ...OTHER EMPL BACKED EUCLID TO HOPPER TO DUMP. HOPPER WAS PLUGGED. WAITED AND SAW LARGE ROCK FALL FROM TOP OF FEEDER WHICH HE ASSUMED MEANT THE HUNG MATERIAL HAD BEGUN TO CLE AR. HE ENGAGED HOIST AND DUMPED LOAD -30 TONS- INTO HOPPER AND WENT BACK TO QUARRY. INJURED EMPLSEE ATTACHED REPORT. ...EUCLID DRIVER DUMPED LOAD OF 30 TONS INTO PLUGGED HOPPER THINKING IT WA