Buscar en el registro

AFTER CHOKE UP OF A SCREW CONVEYOR, EE WAS SUMMONED TO TROUBLE SHOOT AND HELP WITH REPAIRS. BREAKER HEATER WAS KICED OUT SO EE INSTRUCTED OPERATOR TO RESET AND TRY SCREW AGAIN. MOTOR SWITCH WA S TURNED OFF BY OPERATOR. EE SWITCHED MOTOR SWITCHE BACK ON AND WAS STANDING CLOSE TO SEE IF BELTS WERE SLIPPING. WHEN OPERATOR TURNED ON BREAKER, MOTOR AND FRAMEWORK STRUCK EE ON FACE, NECK,

EMPLOYEE WAS STANDING WITH HIS RIGHT HAND RESTING ON THE END OF THE BAGGER CONVEYOR. THE BAGGER OPERATOR STARTED THE BELT WITHOUT WARNING OR LOOKING TO SEE IF THE BELT WAS CLEAR. EMPLOYEE'S RI GHT HAND WAS PINCHED BETWEEN THE END OF THE BELTAND THE STEEL BAG TABLE ON THE END OF THE CONVEYOR. AN INJURY RESULTED TO RIGHT HAND; LACERATIONWHICH REQUIRED SUTURES.

EE WAS WORKING ON RELINING THE BOTTOM OF #1 ROTARY TUNNEL KILN. BRICKS ARE FED INTO THE KILN ON A TRACK. EES LIFT BRICK FROM THE TRACK AND PLACE IN THE BOTTOM OF THE KILN. AS EE WAS PLACING A BROCK, A SECOND BRICK FELL FROM THE TRACK AND STRUCK EE ON THE RIGHT INDEX FINGER CAUSING A LACERATION THAT REQUIRED SUTURES.

EMPLOYEE WAS BAGGING PULVERIZED LIME AND WAS OPERATING AN AUTOMATIC PALLETIZER. EMPLOYEE WAS HANDLING BAGS AS THEY WERE COMING OFF OF A CONVEYOR ONTO AN AIR TABLE. GLOVE EMPLOYEE WAS WEARING ON LEFT HAND WAS CAUGHT AND DRAWN IN AT PINCH POINT OF END OF CONVEYOR AND A FIXED ROLLER THAT IS LOCATED BETWEEN THE END OF THE CONVEYOR AND THE AIR TABLE.

EMPLOYEE WAS OEPRATING THE AUTOMATIC PALLETIZING EQUIPMENT, A LIME BAGGING. BAGS COME OFF CONVEYOR ONTO AIR TABLE, EMLOYEE SIMPLE POSITIONS BAG WITH NOT LIFTING. EMPLOYEE REACHED OVER BAG, BE FORE IT LEFT CONVEYOR AND FIXED ROLLER AT END OF CONVEYOR. GLOVE PULLED OFF, PULLING NAIL OFF.

EMPLOYEE WAS OPERATING A LOADER AND CLAIMS THE SEAT WAS BROKEN AND IN NEED OF REPAIR. OPERATORS ARE REQUIRED TO PERFORM PRESHIFT SAFETY INSPECTIONS. BEFORE USE. DEPT SUPERVISORS AND MOBILE EQU IP SUPERVISOR IS RESPONSIBLE FOR SAFE CONDITION OF EQUIPMENT. OPERATOR CLAIMS SEAT CAUSED BACK STRAIN.

EE WAS CALLED TO TROUBLE SHOOT AND REPAIR A VIBRATING TROUGH CONVEYOR THAT WOULD NOT START. OPERATOR REMOVED GUARD EXPOSING DRIVE BELTS WHEN MECHANIC WAS TROUBLE SHOOTING EQUIPMENT HE ASKED OP ERATOR TO TRY TO START CONVEYOR. BELTS WERE SLIPPING ON DRIVE MOTOR SHIV. MECHAIC CONTACTED SLIPPING BELTS WITH LEFT HAND BELTS TOOK HOLD AND EE LOST TIP OF LEFT RING FINGER IN PINCH POINT. U

EMPLOYEE WAS REMOVING ROCK FROM CHOKED UP CRUSHER. EMPLOYEE LOCKED OUT CRUSHER AND ENTERED TO PHYSICALLY REMOVE CHOKE UP. AS EMPLOYEE WAS EXITING CRUSHER, A ROCK FELL FROM THE FEEDER ABOVE AND STRUCK EMPLOYEE ON LEFT LEG. EMPLOYEE FAILED TO INFORM FELLOW WORKERS OF CRUSHER OPERATOR PROBLEMS AND THEN TAKE TIME TO PULL BACK ROCK FROM EDGES OF FEEDER.

EMPLOYEE WAS LOADING TANK TRUCK BY MEANS OF AN OVERHEAD SCREW FEEDER AS TRUCK WAS LOADING EMPLOYEE PLACED HIS RT FOOT ON TOP COVER OF SCREW SCREW RUNS PARRELL ALONG CATWALK WALKWAY SCREW COVER WAS RUSTED FROM EXPOSURE TO WEATHER DUST COVERED THE WEAKENED RUSTED AREA PREVENTING RECOGNITION OF HAZARD EMPLOYEES RT FOOT BROKE THROUGH RUSTED COVER AND SCREW CAUGHT TOE PULLING FOOT INTO

EMPLOYEE WAS DR3VING A TRUCK HAULING MATERIAL TO THE DUMP. EMPLOYEE DOES NOT RECALL BUMPING OR INJURING HIS RIGHT ELBOW AND JUST NOTICED AN EXTREMELY LARGE LUMP ON HIS ELBOW. THERE WAS NO PAIN OR DISCOMFORT.3

EMPLOYEE WAS MA3UALLY MOVING #1 KILN RAW FEED FEED-0-WEIGHT EMPLOYEE PUT HIS HAND ON TRACK FOR EXTRA LEVERAGE TO PUSH HARDER EMPLOYEE PINCHED RT HAND BETWEEN WHEEL ON FED-0-WEIGHT & RAIL IT M OVES ON EMPLOYE9 BRUISED & CUT-AREA BETWEEN 3RD&4TH FINGER REQUIRING 4 STITCHES

I NAME AND I NAME WERE TO ADJUST THE TAKE-UP BOLTS ON BELT CONVEYOR 7243 THE TAKE UP BOLTS WERE AT THE TAIL DRUM WITH THE BELT RUNNING THEY REMOVED THE TAIL DRUM QUARD BOTH WORKER WERE CLEANIN G THE TAKE BOLT TRACK WHEN I NAME JACKET CLEEVE OR GLOVE WAS CUAGHT AND DRAWN INTO THE PINCH POINT BETWEEN THE TAIL DRUM AND BELT.