Buscar en el registro

Technician removing a relief valve from the rail carriage hydraulic system to troubleshoot Shuttle Wagon asset causing rail carriage assembly to lower and contact technicians left thigh. Minor laceration and a contusion to thigh.

Employee was operating the loader in the east quarry, cleaning up the remaining rock on the quarry floor when they ran over a 2 ft. diameter rock that fell out of the loader bucket. The loader front tire ran over the rock causing the loader to rock to the left, pushing the employee into the ROPS inside the cab, hitting their head, causing a cut to the head requiring stitches.

EE was trouble shooting noise reported around the pusher area of the tire conveyor with another EE. He heard the idler noise & crawled under the conveyor belt for a better look. He reached his hand into the idler area when the belt suddenly started. Co-worker pulled the pull cord to stop the belt & went over to release him from the belt. EE received only bruised left hand & wrist.

Driver failed to lower bed on 10 wheel dump truck, drove approximately 1/4 mile and struck bridge which removed bed from truck. He was taken by ambulance to hospital for evaluation then transferred to Wichita Hospital for further treatment.

The ee was driving and blacked out hitting a speed limit sign, with a concrete base, tipping over the sign, stopping the pickup. There was no injury to either employee, no property damage to sign or the pick. He driving was taken to the hospital for observation and was sent home around 7 pm and released to rtw on 12/28/07.

EE was flagging the crane operator while the forklift was being used to pull the crane into gear. The crane went into gear. A 3" nylon strap was hooked up to the crane and a 3/8" choker was hooked up to the forklift. The strap and choker were connected with a 7/8" shackle. Due to too much tension the choker broke. A slingshot effect occurred and the shackle hit employee's leg.

Employee was finishing concrete under belt #3 take up pulley. He was inside the cage and stood up as the belt started. The belt counterweight hit him and knocked him into the support steel.

OPERATING THE FRONT END LOADER, LOADING SHALE INTO THE STAMLER. LOST TIME 6/3/05, DIAGNOSTIC TREATMENT ONLY BEFORE.

EE WAS MOVING THE GROVE MANLIFT FROM ONE LOCATION TO ANOTHER. WHEN HE REMOVED HIS FOOT FROM THE ACCELERATOR, HE LOST HIS BALANCE AND FELL AGAINST THE HANDRAIL AND STRAINED HIS RIBCAGE MUSCLES.

EE WAS IN HIS PERSONAL PICKUP AND OFF DUTY DURING LUNCH HOUR. HE WAS RETURNING TO HIS WORK AREA WHEN HE COLLIDED WITH A CONTRACTOR HAUL TRUCK. OFF DUTY EE SUFFERED A CONCUSSION. PLEASE DETERMI NE IF THIS IS A CHARGEABLE ACCIDENT.

EMPLOYEE WAS USING SMALL BOBCAT FRONT END LOADER CLEANING UP DUST AND HIT A CONCRETE PILLAR HIDDEN BY DUST. JAMMED NECK, STRAINED BACK.

HURT BACK WHILE DRIVING 35 TON DUMP TRUCK OVER ROUGH AREA IN ROAD. EMPLOYEE SAID HE WAS WEARING A SEAT BELT.

EMPLOYEE WAS RUNNING SMALL FRONT ENDL LOADER WHEN IT HIT A HOLE IN PAVEMENT AND BOUNCED EMPLOYEE HURTING HIS HIP.

EMPLOYEE HIT ROUGH SPOT WHILE OPERATING SMALL FRONT END LOADER AND HURT SHOULDER.FIRST TREATMENT 08-28-92.

54736YEE WAS DRIVING QUARRY HAUL TRUCK & HURT BACK REPORTED 07-29-92

LOADER DROPPED LARGE ROCKS INTO TRUCK BED, JARRED EMPLOYEE SITTING IN CAB. STRAINED NECK AND BACK.

WHEEL ON TRUCK LOST LUBR. GOT HOT CAME OFF, DRIVER HURT BACK FRON JOLT WHEN AXLE HIT ROAD

EMPLOYEE WAS TRYING TO FREE MATERIAL PACKED AROUND CONVEYOR BELT TROUGHING IDLER ROLLER WITH A ROCK PICK HAMMER. THE HAMMER CAUGHT ON ROLLER AND PULLED HIS ARM ACROSS TOP OF ROLLER BETWEEN BE LT CONVEYOR ADN IDLER ROLLER; FRACTURED BOTH BONES LEFT FOREARM. HE WAS ABLE TO ACTIVATE SAFETY CABLE SWITCH AND STOP CONVEYOR.

EMPLOYEE WAS DRIVING FRONT END LOADER PUSHING COAL WHEN BUCKET HIT A RAIL CAUSING THE LOADER TO STOP SUDDENLY AND JAR EMPLOYEE.

BUMPED SHOULDER3INSIDE CAB OF QUARRY TRUCK WHEN FRONT END LOADER HIT SIDE OF TRUCK BED.

OPERATING ENDLOADER CLEANING UP WASTE MATERIAL WHEN MACHINE STRUCK HARD OBJECT BURIED UNDER MATERIAL STOPPING MACHINE AND BOUNCED HIM AROUND INT HE CAB.

EMPLOYEE JUMPED ABOUT 2FT FROM FRONTEND LOADER TIRE TO QUARRY DUMP TRUCK FENDER AND LOST HIS FOOTING AND FELL 6FT TO QUARRY FLOOR