Buscar en el registro

Employee was operating a Jeep personnel carrier (2787) on the west main left roadway at cross cut 70 when the Jeep hit the right rib causing it to turn over on it side.

Employee was operating a Cat 651 scraper SN/67K751 at the start of the shift. As the employee put the transmission in gear it jerked causing employee to strain their neck.

Employee was working on the slope belt approximately 700 feet from the surface when EE got left arm caught between the top belt and the top side and middle rollers.

As an employee was getting out of a parked piece of equipment it started rolling backwards down a small incline hitting an employee on left side knocking employee down before the other employee could stop the piece of equipment.

Employee was backing a ram car into a cross cut when EE ran over a rock causing employee to hit head on canopy. Employee did not start missing time from this injury until 01/26/217.

Employee was riding on a ram car (tank duster) when it ran over some material causing right hand to get caught between the swivel part of the ram car.

Reportable only due to sutures. Employee was cleaning beside the belt when a small rock came off the belt and struck him on the right side of face.

Employee was scooping the roadway when his canopy hit the ventilation tubing causing it to come into the cab hitting left elbow.

Employee was getting into a man trip when he felt a pain in lower back.

Employee stated that as he was getting out of a 3.5 loader he felt the loader move and as he went to jump back in the loader he hit the steering lever and his left ankle got caught between the loader.

While starting to remove tubing from a loader bucket the employee stated he did not realize his right foot was under the bucket as it was being lowered to the ground.

Employee was riding in a hummer on North Main roadway when the hummer hit a hole and the employee jammed his neck. Employee did not start missing time from this accident until 04-18-2013.

Employee was riding on a man trip on North main roadway at crosscut 43 when the ride hit the rib hurting the employee`s right knee.

Employee stated he was aligning belt and cleaning material off the outer part of the top belt frame when his left hand got caught between the belt and roller.

Employee was working in a 3.5 loader bucket when he was pinched between the stinger and the back frame of the bucket.

Employee was riding in a man trip when it hit a rib causing him to hit his nose and fore head.

The employee was traveling down a hill in a shuttle car on West Main Right section when he hit the rib with the shuttle. A rock measuring approximately 20" by 16" by 51" long came in the cab and hit the employee.

Employee was changing out a front end on a ram car when he mashed his middle right finger. Reportable only due to fracture to middle fnger.

Employee was riding a rubber tire man trip out of the mine when the man trip hit a rib hurting the employee's lower left back. Employee did not start missing time until 11/09/2010.

Employee was riding a rubber tire man trip out of the mine when the rubber tire man trip hit a rib causing the employee to hurt his left knee. Employee did not start missing time until 11/10/2010.

Employee was riding to the section in a Lee-Tram when it hit a hole in the roadway hurting employees back. Employee did not start missing time due to this accident until 12/03/2010.

Reportable only due to fracture. Employee was holding in the conveyor lever on the feeder when she felt a burning sensation between her shoulder blades (fracture to left 4th rib).

Employee was carrying a tray of block to West Mains when the employee went to set down the tray of block. The employee stated the hydraulics stuck and the tray hit the ground and throw the employee into the top of the cab. (The loader was checked and everthing worked properly).

Employee was operating a 3.5 loader and had his arm laying on top of the door. When the 3.5 loader turned his arm got caught between the door and a SCSR storage box. Employee did not miss any work.

Employee started to get into loader bucket while the loader was still moving. Employee right foot got caught between bucket and a rock on the foot wall.

Employee strained his middle part of his back as he was greasing a SR-1 mantrip.

Employee was riding Lee-Tram when equipment hit hole in roadway and employee jambed his neck and shoulder.

Employee was operating a water car (Ram Car 3923) up a hill. The car would not pull up the hill so the employee turned around and headed back down the hill. When the employee hit the brakes she lost control and hit the right and left ribs.

Employee was stepping down from tractor on his right leg. Employee felt pain in lower back. Employee did not start missing time from work until 01/04/2010.

Rock truck operator backed over the dumping point.

Employee was driving the #47 tractor, when he hit a bump in the roadway, hurting his neck.

The miner was riding the mantrip and experienced back pain. This miner did not begin missing work until 5/15/2009.

miner was operating a shuttle car and bumped his elbow.

Miner was operating a mantrip. Ran over a post and it jostled him around in the cab.

miner was operating a ram car on a grade. the miner did not put the ram car into first gear and it gained speed. the miner rubbed the rib with the ram car to slow it down and was jostled around.

Miner was riding mantrip and the mantrip backed into a timber, it fell and struck the miner's lower leg.

Miner was moving a ramcar to a dry location to repair it. While traveling down a grade, it slid into a rib and jostled the miner.

miner was riding to his work area and was bounced around when the mantrip went through a rough spot.

Miner was operating a 3.5 loader and while traveling lost control and struck the rib.

A rock bounced off the slope belt and struck the miner's right index finger. Miner began missing work on 07/07/2008.

Miner jumped from the loader he was operating when it began to slide.

Miner was operating loader and while tramming he ran over crib tie, he came out of seat and struck canopy.

Miner, operating mantrip, ran over large rock and jammed head into canopy.

Miner was moving a loader when the engine belts began slipping causing smoke inhalation.

Miner was operating mantrip leaving section at end of shift. Ran over something in the roadway throwing him into canopy of mantrip. Note: Began missing work 9/15/07.

A rock came off the slope belt and struck the miner in the side.

Employee was driving the fuel car when he struck a hole in the roadway. His hand was resting on the fire extinguisher and it was thrown up towards the canopy lacerating a finger on his left hand. This resulted in sutures.

Employee was driving a Kubota tractor when he ran over a rock in roadway and strained his neck. Employee began missing work 3/30/07.

Employee was operating 4 loader when wheel ran over ledge causing operator to bounce and strike head on canopy.

Employee was operating ram car hauling sand. He stated he thought car jumped out of gear. Ram car steared and ran into rib before stopping.