Buscar en el registro

Operator was dismounting D-6 dozer when EE's foot slipped from the blade arm due to wet and muddy conditions causing EE to hit EE's left knee on the arm. Operator had just returned to work from a double knee replacement and the impact on the knee caused the incision/scar area to reopen.

Maintenance Tech was performing maintenance on a D-8 Bulldozer. Miner slipped when trying to cross over the blade to add oil and fell on the blade brace. Miner injured left knee from the fall.

Miner had just completed adding oil to the Hitachi ZX450 excavator when EE stepped down onto the track. After stepping down onto the track. Then, slipped on the track, fell against the catwalk of the machine. EE completed EE's entire shift. It was not until the end of shift EE noted pain in EE's rib area. EE did not report the accident until the following morning (5/6/2022).

Employee was doing a pre-shift inspection on 290 Volvo excavator. While standing on machine tracks, slipped and fell to uneven ground. Tracks are 30" high.

The employee grabbed the steering wheel to get into the truck. His shoulder popped out of place. The employee then let go of the steering wheel and fell to the ground. He began missing work on 2/7/2014.

EE was bending a 6' bendable resin roof bolt and slipped on pavement and injured right shoulder while leaning forward into the roof bolt.

Employee was looking for a suction hose "6". He stepped on a patch of ice and fell. He stabbed his middle finger on his right hand. He struck his left knee on a pallet. He tore ligament in his left knee when he fell.

Was servicing front end loader and was standing on steel brace on front end bucket area to reach high area were fittings were located. Slipped and fell on his rt. hand.

Injured was jacking red devil tugits when he slipped causing him to twist left leg injuring knee.

Checking battery charges in surface shop, he tripped over charger cable and fell onto the floor and SCSR on belt.

Miner operator had A & B run out of face of #4 entry on south section. The clean up was in progress. Some rock had fallen out of last 10' of cut & was being loaded out. While cleaning up right side of cut the operator stumbled over a piece of the rock falling on miner remote and hurting ribs/hip/shoulder.

Was on kees in muddy area, repairing trailing cable when finished, was in process of standing up when right leg slid in mud in outward direction to the side and heard knee pop.

The employee stepped out of the scale room and slipped on the bar grating twisting left knee.

Employee picked up miner cable to move it out of roadway and then complained of back pain. Employee slipped in mud while moving the cable.

Employee stepped out of the scale room onto some ice covered grating and slipped twisting his ankle as he fell. His leg was bent under his body. He tore ligaments our the left and right side of his right ankle.

EE was pulling 1 1/2" hose around a 980G loader. He pulled it around the front of the bucket. He stepped on some mud & hose got caught under the bucket(mud was from washing the 980G). He slipped to the ground & landed on his right forearm. His head hit his shoulder and strained the muscles in his neck. He is taking therapy under Dr's care. He worked on 1/15/07 & left early.

Injured was turning to walk away from roof bolter when he got his foot wedged between two rocks and twisted his right inside leg near knee.

While stepping out of a MCC Building, injured stepped onto uneven ground and twisted his left ankle.

EMPLOYEE STATED WHILE HE WAS SHOVELING #2 BELT, HIS LEG GOT STUCK IN MUD & HURT HIS KNEE.

While installing belt structure on a belt move - Employee tripped over structure rail & fell on his rt. knee causing injury.

Employee was attempting to grease pins and bushings on the boom of a Hitachi 400 backhoe. He was walking on the ice-covered boom when he slipped and fell off the boom, falling to the ground. When hitting the ground his right foot landed in a rut and twisted his right knee towards his left knee, pulling tendons and cartilage in his right knee.

EMPLOYEE LOST HIS BALANCE AND FELL OFF TRACK FRAME.

EE WAS TRAVELING ALONG BELTLINE LOOKING FOR WHERE WATERLINE WAS REDUCED FROM 3" TO 2". HE SLIPPED ON ICE. ACCIDENT WAS NOT REPORTED AS LOST TIME FOR 10 DAYS.

EE WAS CARRYING ROCK DUST AROUND BOLTER WHEN HE GOT HIS FEET TANGLED IN CABLE, CAUSING HIM TO TRIP, STRIKING HIS BACK ON BUMPER OF ROOF BOLTER.

FELL OUT OF BOBCAT LOADER WHEN FOOTING WAS LOST.