Buscar en el registro

Employee was stepping out of the equipment when EE's left foot slipped from the step causing EE to fall to the ground. Employee felt pain in the shoulder area.

Employee was climbing the ladder to the disentegrator deck when they lost footing, causing them to fall to the ground, and employee felt pain in their elbow.

Employee was cleaning the oil house when employee slip hurting left ankle.

Employee was stepping onto ground level from the lime silos and twisted ankle.

Employee was climbing down a ladder located behind the #10 Belt. There was a two foot gap between the ground and the bottom rung of the ladder. Employee slipped off the bottom rung and hit lower back on a concrete wall located next to the ladder.

Employee strained left knee while turning off water valve in lime room.

Employee was attempting to enter the D7 dozer in the pit. As the operator reached for the top hand rail, slipped and fell backwards, landing on the ground. Employee suffered small contusions on back and right arm. Doctors put employee on restrictive duty.

Employee was walking to the employee building. Employee turned to left to go back inside the shop and slipped on some loose gravel spraining right hand.

Employee was cleaning snow off of #2 belt. As EE was walking back to the truck EE slipped on a snow packed surface. Employee broke a bone in left ankle as EE fell.

Employee was traveling up the stairs of #10 belt. While approaching the platform EE slipped and fell forward. EE cut EE's head on the metal head box of #10 belt.

Employee slipped and fell while trying to enter a dozer. Employee fell 2.5 feet and landed on his right shoulder. The employee felt fine after the incident. He continued to work for eight days without any issues. On 1/12/2016 employee went to his doctor because of dizziness and a headache. The doctor diagnosed the employee with a slight concussion that was caused by the fall.

Employee was moving/connecting hose on a portable pump in muddy conditions. He slipped and strained his lower back. Doctor put him on restricted duty.

Employee was welding inside the concrete sand screw. He was standing on the log of the screw while welding on a box. He lost his footing, slipped, and landed on his right foot and heel.

Employee was checking the fuel on a welding machine, which is located on the back of a flatbed pick-up. Employee climbed up the driver's side of the bed, instead of the rear of the bed. Employee slipped on the pick-up's fuel neck, which is located on the bed. Employee tripped and fell to the ground, landing on his right foot. His ankle broke/dislocated upon impact.

EE strained his right knee dismounting a front-end loader. He did not report his injury immediately. Two days later he requested to go to the doctor. He did not improve as expected and was put on restricted duty.

Employee stated that after he stepped off of a Cat 980H Front End Loader he felt a sharp pain in his lower back. He was examined at a local clinic and determined that he strained his lower back. Employee was released to light duty and will follow up with doctor on 3-11-13.

Customer Truck Driver was in tarping area and was pulling on rope to unroll tarp on trailer, something broke and employee fell and hurt left hip.

Employee was stepping over eight inch pipe and twisted his left ankle. Employee was examined by doctor and diagnosed was a sprained ankle. employee was returned to work with no climbing restriction and will follow-up with doctor on 8-8-12

Employee was replacing srceens on 5'x 20'shaker, slipped and fell and struck head on chute. Employee was examined by doctor and released to full duty. Employee was perscribed some medication for pain.

Employee states he slipped and bumped his right knee, two years ago and bumped again in March, but did not report the incident either time, until 6-15-09.

Employee was climbing onto CAT 230 KW Generator to turn unit on for the day when his right foot slipped causing him to fall and hurt his right knee. Employee was examined by a doctor on 1/2/09 and released to regular duty.

Employee walking to get into service truck, stepped into a low uneven ground area, felt pain in R knee. Employee was able to grab hold of service truck door to keep from falling.

Employee was on the secondary shaker removing the middle screen of the top deck. The employee was repositioning himself to allow the screen to be pulled higher on the deck, as he stepped and turned his right foot got caught on the upper screen causing his right knee to twist. Employee was released to restricted duty and get rechecked by doctor on 7/25/2008.

Employee was walking from excavator to pickup truck at the end of his shift and stepped into a hole and fell causing pain to his left knee. Was seen by an M.D. and was returned to work on restricted duty and will follow-up with M.D. on 9/11/07.

Employee's foot slipped while climbing onto FEL causing pain to rightt shoulder; employee is scheduled for surgery on 06/28/07.

Employee was climbing on the side of a Cat 750 Excavator to remove fuel hose. His foot slipped on bottom step an he felt pain between his right elbow and shoulder The employee did not request medical care at this time. Employee requested to see a doctor on 10/17/06 and was given restricted duty and returned to work.

EE was going to fill fuel tank on fuel truck, when he slipped and fell on a broken step on the walkway at the fuel Island. EE fell on right shoulder, causing pain. He will be receiving physical therapy for 2 weeks and follow-up with DR. on 6/2/06. EE did not report injury until 5/11/06. Had Dr. appt. on 5/15/06.

While changing screens, one screen was too tight, tried to push a little harder to get screen in place and lost balance and fell forward. EE tried to catch himself and hurt left wrist.

Employee was repairing (pit) water pump, when he stepped away from pump to wave over the trackhoe operator. The employee fell, causing pain and swelling on right knee. He was placed on light duty, will follow-up with Doctor on 11-14-05.

EE WAS INSTALLING REPAIRED LIFT CYLINDER ON A 750 JOHN DEERE TRACKHOE HE POSITIONED A LADDER AGAINST THE BOOM OF THE EXCAVATOR AS THE CYLINDER WAS LIFTED UP AND CLOSE ENOUGH FOR HIM TO REACH THE LADDER STARTED TO SLIDE ALONG THE BOOM OF THE EXCAVATOR HE THEN LOST HIS BALANCE AND FELL AND STRUCK THE REAR BUMPER OF SERVICE TRK RESULTING IN PAIN TO LEFT SHOULDER

EE was installing repaired lift cylinder on a 750 John Deere trackhoe he positioned a ladder against the boom of the excavator, as the cylinder was lifted up and close enough for him to reach, the ladder started to slide along the boom of the excavator. He then lost his balance, fell & struck the rear bumper of the service truck resulting in pain to left shoulder & neck.

Slipped after his foot got caught on step, causing a bruise on his left shin.

Employee was checking on a broken travel chain on dragline when he slipped and fell in the engine compartment, hurting his right knee (contusion). He went to doctor and was given light duty until Jan. 22, 2005 at which time he may resume regular duty.

EE was getting off of dredge into boat, when boat shifted and caused EE to lose his balance and fall out of boat. While falling, he reached out to grab onto dredge cutting left palm in between ring finger and pinkie finger.

Dismounting from trackhoe and fell off. and hurt right ankle.

Exiting front end loader from ladder to get off and slipped & fell to the ground, causing headache. Was taken to hospital and released to full duty as of 6-11-04.

CLEANING WINDOWS ON EQUIPMENT AND SLIPPED AND FELL OFF HAUL UNIT. RESULTING IN PAIN IN RIGHT SHOULDER.

EE GETTING OFF LOADER, FOOT SLIPPED OFF THE STEPAND FEEL DOWN.

EE WAS TARPING HER LOAD AND WAS CLIMBING OUT OF HER TRAILER WHEN SHE SLIPPED OFF OF THE TRAILER AND STRAINED HER LEFT LEG AND RIGHT SHOULDER.

EE WAS IN BOAT ON FRONT DECK. WHEN HE STEPPED DOWN TO FLOOR OF BOAT HIS RIGHT ANKLE TWISTED AND HE FELL. HIS RIGHT ANKLE IS SPRAINED BUT NO BROKEN BONES.

EE WAS AT THE SCALE HOUSE. A TRUCK WAS COMING UPTO THE WINDOW TOO CLOSE TO HIM SO HE MOVED TO GET OUT OF THE WAY. HE TRIPPED & FELL ON METAL BARRAILING ON CHEST & CHIN.

EE WAS CHECKING ENGINE OIL ON 4600 MANITOWOC DRAGLINE AND SLIPPED AND FELL HURTING LEFT THUMB.

DRIVER WAS TARPING LOAD AND STARTED UP FRONT OF TRAILER. LOST BALANCE ON TOUNGE OF TRAILER AND FELL APPROX. 4 FT TO THE GROUND. HE LANDED ON HIS LEFT SHOULDER AND SIDE BREKING ONE RIB.

EE WAS REPAIRING DRAGLINE. DUG THREE FOOT HOLE, WHILE CLIMBING INTO HOLE, HE SLIPPED AND TWISTED LEFT KNEE.

EE WAS GETTING OFF OF HIS BELLY DUMP TO CHECK HIS TIRES WHEN HE SLIPPED AND FELL. TRYING TO BRACE HIMSELF WITH HIS LEFT HAND AND HURTING IT. EE WENT TO DR AND FOUND OUT HE BROKE HIS HAND. CAST WAS PUT ON HIS HAND. DR SAID FOR HIM TO STAY HOME UNTIL 11-10-00 AND RETURN TO WORK ON MONDAY 11-13-00.

EE SLIPPED AND HIT HIS LEFT SHIN AND CUT IT WHILE WASHING SAND OUT OF SCREW. EE WENT TO HOSPITAL AND HAD SEVEN STITCHES TO CLOSE THE CUT AND WAS SENT HOME.

CARRYING SCREEN UP STAIRS TO 8 BY 20 PRIMARY SCREEN, TRIPPED ON STEP, STRAINING RIGHT KNEE.

EMPLOYEE WAS CHANGING A ELECTRIC MOTOR OUT ON CRANE ST8 WHEN HE SLIPPED OFF BUMPER AND HIT RIGHTSIDE OF HEAD.