Buscar en el registro

Checking the coolant level on the 982M. To do this the hood is raised on the machine and the employee climbs onto the rear step and visually inspects the coolant tank. EE did so and while climbing down from the step EE slipped, landing on the ground on their feet. EE then moved backwards, tripping over a wheel chock on the ground and landed on top of the wheel chock on their back.

While cutting I-beams, 1 emp. cutting had IE hold the beam as EE cut the bolts & letting the beam fall away. The beam came loose, IE pushed the beam & lost balance falling w/ the beam. They cut the beam loose, & partner said, LET IT GO. Losing balance, fell w/ the beam. IE hit knee on the tail support for the tail pulley conveyor. Laceration of R Knee.

Employee was working in a chute when they slipped and caught the outer shin of the left leg, cutting their leg. Employee required 15 small stitches to close.

Employee was walking up steps when one side of the tread gave way.

attempting to reach a float on the slurry tank, the emp. stretched across 2 beams w/out a harness & not able to hook into an anchor point. In the act lost his grip & fell to the ground, sprained his back & a few contusions due to the fall. Taken to the clinic, released on light duty & given percocet for pain. X-rays were taken. the employee will report to work tomorrow morning.

Employee was removing belt from conveyor that had torn earlier that morning. He was working on the conveyor adjacent to the belt and when he was pulling belt off he was walking down conveyor and missed the three step ladder that led to the flat level of the plant causing him to fall and injure himself.

Cold, icy conditions. Work areas were being de-iced. Employee was going to his haul truck when he slipped on a patch of ice and struck the back of his head. Employee was transported to hospital where he was diagnosed with a mild to moderate concussion.

Employee was coming into work walking on company parking lot. Conditions were dark and icy. Employee slipped on dark ice. Felt pain. Employee was taken to hospital for treatment. Employee was diagnosed with tear of lateral meniscus.

Employee was changing screens when he slipped on ice on catwalk, twisting his right ankle, causing a fracture.

Employee was moving pumps from a lower level of the quarry to a higher level due to heavy rain falls. Employee was wading in 2' of water to disconnect pump hoses and to rig pumps for the lift. Employee slipped on an unseen rock below the water. Fell to his right side. Attempted to stop his fall, his right arm suffering a right shoulder contusion.

Employee was walking to the truck door after putting antifreeze jugs into the bed of the truck. Overturned ankle on a clump of dirt causing left ankle sprain.

Miner was repairing lower screens of a screen deck. Took catwalk section out to service. Did repair and climbed back up to upper level. Did not replace decking. Turned to do another task when he fell through opening. Fractured ankle 4' down when struck lower hand rail of lower deck.

Employee was inventorying stockpiles. Walked on slope of stockpile. Left leg dropped into soft spot. Attempted to pull himself out when he felt a pop in his left lower calf. Diagnosed as muscle tear to lower left calf.

EE slipped on ice at the edge of stockpile base while performing stockpile surveying. EE injured left ankle, released to work with restrictions for a sprained left ankle.

Slipped and fell while walking.

EMPLOYEE WAS OFF LOADING 5 GALLON CONTAINERA FROM PICK-UP TRUCK. SLIPPED OFF TAILGATE AND FELL 2 1/2 FEET.

Employee was picking up a crane outrigger pad. As he threw it up onto the crane deck, he slipped in the mud. The combination of slipping while throwing the outrigger pad strained his back muscles. Employee could barely move his back the next day and needed medical treatment.

EMPLOYEE WAS EXITING A LOADER. HE STEPPED TO THE GROUND AND OVERTURNED HIS ANKLE WITH HIS KNEE HITTING A ROCK WHEN HE FELL.

EE CLIMBING DOWN LADDER OF 85 TON TRUCK RING FINGER CAUGHT IN STEP AND CUT EE S FINGER.

EMPLOYEE WAS PARKING HIS LOADER AT THE GARAGE. WHEN HE EXITED THE LOADER HE SLIPPED AND FELL FROM THE TOP STEP OF THE LADDER.

EE HAD DUMP TRUCK PARKED UNDER LOADING BINS. SHE CLIMBED UP ON TRUCK TO SEE IF IT WAS LOADED. SHE SLIPPED ON THE LADDER AND FELL TO THE GROUND.

EMPLOYEE WAS USING A HYDRAULIC HAMMER TO BREAK ROCK ON THE JAW CRUSHER. AS HE WALKED AWAY HE TRIPPED ON A HYDRAULIC HOSE TWISTING HIS LEFT KNEE.

EMPLOYEE REMOVED PLASTIC FROM BELT #8, WHILE DESCENDING LADDER HIS FOOT SLIPPED AND RIGHT HAND GLOVE (LONG WELDING GLOVES) GOT CAUGHT IN RING OF LADDER. BODY WEIGHT WAS SUSPENDED APPROX 2 SECO NDS HANGING BY GLOVE OF RIGHT HAND, AND FELT STRAIN ON RIGHT WRIST AND SHOULDER.

EE WAS WORKING IN QUARRY, TRIPPED AND FELL ON RIGHT KNEE.

EE WHILE DESCENDING LADDER FROM CATWALK, LOST GRIP & FELL APPROX 3 FT STRIKING RIGHT ARM, BELWO ELBOW AGAINST A ROCK CUTTING ARM

WORKER WAS CUTTING METAL PIPE WITH TORCH IN A 2' TRENCH. HE SLID OFF MATERIAL HE WAS KNEELING ON AND TWISTED BACK.

EMPLOYEE WAS WALKING DOWN STEPS FROM "TOOL ROOM" IN STONE CRUSHING PLANT ON A RAINY DAY. HE REACHED GROUND LEVEL (3 STEPS) AND WENT TO TURN. HE STEPPED IN SMALL HOLE (DEPRESSION) AND TWISTED ANKLE.