Buscar en el registro

While attempting to dismount Pit Loader 07-0014 (992K) from the rear access ladder, EE twisted EE's right knee as EE made contact with the ground.

rubber strap access step to service truck bed broke

Employee was walking when EE stepped into a small hole/impression in the ground. EE's right hip shift unexpectedly causing discomfort. On Monday, while on shift, EE notified the supervisor, for the first time, that EE was in pain, then EE was taken to Concentra MC. Diagnosis Sprain of Right Hip. released with restrictions. We will provide work under those restrictions.

When the employee attempted to mount a dozer, EE slipped and fell.

As EE was dismounting a 992 pit loader EE missed the last rung of the ladder, causing EE to put all EE's body weight on EE's arm, causing a sprain to EE's left wrist.

While EE was cleaning and preparing the Bohringer Crusher for maintenance, EE slipped and fell (same level) onto buttock causing some pain to EE's lower back area. EE was taken to Medical Center, for medical attention.

Picking up for the company in the rain and tripped and fell from the stairs

EE tripped over a very small sand pile, causing EE to fall and impact the ground. The impact caused a contusion to EE's forehead, above the right eye. EE complained of neck pain, but refused medical attention, was given first aid. EE told supervisor EE would notify supervisor in the morning if the pain persisted.

EE slipped into a gator hole which was covered by vegetation while walking during the performance survey duties, causing knee to impact the ground and/or twist.

Walking backwards while using a hose to clean a discharge ditch employee lost balance falling backwards (on the same level). Employee sprained left hand/arm trying to break fall.

EE slipped on the M-14 deck while walking towards the stairs. EE grabbed the handrail with right hand which prevented ee from falling but caused a strain to right shoulder as ee was successful in keeping body from landing on the deck.

The ladder that employee was using slipped and fell as he was dismounting.

While cleaning his right shoe on the cab level platform of his Cat 988H loader, employee fell backwards down the steps.

Employee was working on the M12 grizzly feeder, as he walked on the top deck he slipped and the right leg slid between the grizzly bars causing a sprain

While wearing his safety harness, employee was inspecting the feeder pan when he slipped on a small rock and fell (on the same level) on to his buttocks.

Dismounting the portable crusher ee missed a step causing him to apply all his weight on the right leg/knee.

Employee was climbing on to the Cat 988H front end loader when he slipped and fell. His left elbow and knee struck the loader during the fall. The clinic gave first aid to his contusions. MSHA definable treatment did not begin until the MRI performed on 1/19/2012.

EE was exiting the cab of his loader, missed the step, fell forward and grabbed the railing applying force to his elbow.

Customer's truck driver, fell from his truck causing lacerations to his head and right hand.

EE was exiting the shaker screen unit when he misjudged the foot hold he expected, which made him to slip causing his left arm to support all his weight and dislocating his shoulder.

Slipped when exiting the Boehringer Crusher, catching his right foot on the hammer resulting in a fall that fractured his right great toe.

Injury jumped about one and one half feet from the concrete plant foundation to the ground. When he landed he felt a pain in his right knee. He did not think it was a reportable injury, but the next day the pain continued and got worse.

Dismounting loader engine compartment employee slipped and fell hitting his knee on the rocker assembly.

Mounting his Caterpillar 777C haul truck, employee stepped on the first rung of the ladder and felt a pain in his knee.

Exiting the front end loader employee slipped on the steps and fell.

While assembling the conveyor to the platform, the weight of the platform shifted causing the platform to strike his knee/leg. The chest and back contusions probably occurred while falling to the ground.

Climbing up the ladder to enter the cab of the Caterpillar 785 Haul Truck, employee slipped and fell approximately 5 to 8 feet to the ground. The area in which the truck was parked was muddy.

Employee was dismounting a dozer when he hit his knee against the dozer track.

EE missed a step while dismounting the printer stand by the scale, falling and hitting his left knee and left elbow.

Fell from Cat 740 Haul Truck after completeing refueling the truck and attempting to dismount.

Employee cut U-bolt holding cable to spool. Tension in cable was released knocking employee to the ground on his back.

EE WAS HELPING TO INSTALL THE 3RD RAIL ON THE RIGHT HAND SIDE OF THE MACHINE. CO-WORKER ASKED IF WE NEED TO TIGHTEN ALL THE BOLTS ON THE 3RD RAIL. EE SQUATTED DOWN AND CALLED TO ASK ABOUT IT. HE LOST HIS BALANCE AND FELL ACROSS THE RAIL ONTO HIS BACK.

When the employee climbed down from the fuel farm deck on to the lube truck, he fell.

EE MISSED THE LAST STEP OF THE STAIRS WHEN EXITING THE PIONEER CRUSHER. HE STEPPED OFF THE CRUSHER ACKWARDLY, PULLING HIS SHOULDER.

EMPLOYEE SLIPPED AND FELL ONTO A PIECE OF ANGLE IRON; CUTTING HIS THIGH.

EE WAS ATTEMPTING TO REPOSITION THE TRAILING CABLE WITH AN INSULATED CABLE HOOK. THE CABLE WAS DAMP AND AS HE STARTED TO PULL ON THE HANDLE, THE HOOK SLID ALONG THE CABLE. HE LOST HIS BALANCE AND FELL BACKWARDS STRIKING THE BACK OF HIS HEAD ON THE D-RING OF THE CABLE TRACTOR PARKED NEARBY. THE BLOW CAUSED A LACERATION WHICH REQUIRED 9 STITCHES TO CLOSE.

EE WAS DISMOUNTING THE PAYSTAR FUEL TRUCK WHEN HIS FOOT MISSED THE STEP. HE FELL TO THE GROUND INJURING HIS HIP/PELVIC AREA.

EE SLIPPED OFF BACKHOE STEP & FELL BACKWARD HITTING HIS ELBOW ON A PIN.

LEFT FOOT SLIPPED ON LADDER CAUSING BODY WEIGHT TO SHIFT TO RIGHT LEG. THIS CAUSED INJURY TO RIGHT KNEE.

STEPPED ON ROCK WHILE DISMOUNTING FORKLIFT & EE FELL