Buscar en el registro

Employee was unscrewing a hydraulic cap on the 315 C excavator and fell off the track. Employee continued working. No time was lost.

Clearing brush, cut nose on chainsaw blade

Steam cleaning a radiator and steam contacted left lower leg

Employee was walking through tipple and tripped over a step. Didn't fall completely. Initial incident occurred 12/31/13, however employee didn't report incident until after Form 7000-2 was submitted on 1/10/14. Due to delay in reporting incident, reporting to MSHA was overlooked, but was reported to Worker's Compensation. An amended 7000-2 will be submitted.

Employee was exiting his truck at the scales to weigh. When he stepped down on the bottom step, it broke, throwing him backwards and he hit his head and shoulder on the platform. He passed out for about 3-4 minutes. Employee was taken to the ER by the supervisor. This resulted in a concussion and a shoulder contusion.

Employee was changing a hose on the Cat 992C Front End Loader. When finished, he raised up to come to a standing position, not realizing that the arm bracket to the mirror was above his head. He hit his head on the arm bracket, jamming his neck.

Employee was climbing into loader at beginnning of shift. Went up the steps and stood on platform. Icy conditions on platform caused employee to slip and fall. Employee fell, but caught himself with his hands and pulled himself back up.

Employee was adjusting a round hay bale as it was being put in the mulcher. Used left arm to push on bale and arm became stuck in hay bale as it was moving, pulling arm, resulting in some pulled muscles.

Employee was fueling the dozer at the end of his shift. When he was finished, he was attempting to step down from the dozer. He was holding onto the safety bars and going down backwards. When he put his feet on the ground and was still holding the bars, he heard a pop in his arm.

The coal truck driver, just finished loading his dump truck with a front end loader and was exiting the loader via the ladder when he slipped and fell onto the coal pile. He was not aware of any injury at that time. On Tuesday, January 6, 2009 he was taken to the emergency room and after evaluation and tests he underwent an emergency splenectomy.

Coal truck stuck in mud.Loader brought down to help pull truck out of mud.Tow cable stuck on loader between tail light and body.EE dislodged tow cable from back of bumper,it flew back and hit employee in face, causing a laceration to forehead and dislodging front tooth.Accident occurred prior to tow cable being attached to truck.

EE slipped and fell while walking on sloped ground.

UNKNOWN

EE BENT DOWN TO ROLL OVER A 12" X 18" X 4" LUMP OF COAL, WEIGHING APPROX 50 LBS. UPON DOING SO, HE INJURED HIS BACK.

WHEN EE PUT THE PT0 IN GEAR TO BEGIN SPRAYING WATER, A HOLE BLEW IN THE SIDE OF THE NOZZEL ON THE WAND. THE WATER PRESSURE SPRAYING OUT THE SIDE OF THE NOZZEL MADE THE WAND SPIN. THE WAND SP UN SO FAST THAT IT CAME AROUND AND HIT EE A FEW TIMES BEFORE HE COULD GET AWAY FROM IT.

MECHANIC WAS REPLACING A CUTTING EDGE ON A DOZER. WHEN HE REMOVED THE OLD BLADE, HE DROPPED THE CUTTING EDGE AND A PIECE OF METAL FLEW OFF I CUT HIS LEG..

WHILE STACKING AUGERS ONTO A SLED, SOME AUGERS DISLODGED AND STRUCK THE EMPLOYEE IN THE LEGS KNOCKING HIM DOWN AND BENT HIS LEFT LEG. HIS INJURY IS A BROKEN TIBIA IN HIS LOWER LEFT LEG.

EMPLOYEE WAS CLEANING OFF A BLOCK OF COAL, SHOVELING DIRT & CLEANINGS INTO THE LOADER BUCKET WHEN SOME SCHALE FELL FROM THE HIGHWALL. UPON RETREATING TO AVOID THE SHALE MATERIAL, HE TURNED HIS ANKLE, RESULTING IN A SMALL FRACTURE ON THE ANKLE BONE.

EE WAS WALKING ACROSS THE COAL INSPECTING IT. THERE WAS A PATCH OF ICE WHERE SNOW HAD MELTED. HE STEPPED ON THE ICE WITHOUG REALIZING IT. HE SLIPPED, FELL AND BROKE HIS ANKLE.

54736YEE WENT INTO CAB OF THE 2400 LIMA DRAGLINE TO SEND A MESSAGE ON THE RADIO.UPON LEAVING THE DRAGLINE HE SLIPPED ON THE WET CATWALK.HE LANDED ON ONE LEG BREAKING 2 BONES IN THE LOWER PART 66038AT LEG.

A PRODUCTION CONTRACTOR EMPLOYEE WAS ADJUSTING FAN BELTS BETWEEN THE ENGINE AND THE RADIATOR ON A FIAT ALLIS 745 FRONT-END LOADER. A LARGE GUST OF WIND SIMULTANEOUSLY BLEW THE EMPLOYEE'S HARD HAT OFF AND FLIPPED THE ENGINE PANEL COVER WHICH STRUCK THE EMPLOYEE ON THE HEAD CAUSING A LACERATION OF THE SCALP.

MINER WAS HOLDING DOZER DOOR FRAME, DOOR CLOSED ON TIP OF LITTLE FINGER OF LEFT HAND.

EMPL WAS CLEANING COAL BENDING & LIFTING COAL UMPS & ROCKS & IN DOING SO STRAINED BACK & STOMACH MUSCLES.

HAND SLIPPED OF0 TAILGATE ON DUMP TRUCK AND GOT CAUGHT BETWEEN TAILGATE AND BED OF THE TRUCK CAUSING MASHED FINGERS OF THE RT RING AND INDEX FINGERS

WHILE REMOVING 8RILL STEEL FROM HOLE, TABLE BUSING SLIPPED AND DROPPED CATCHING THE 3RD & 4TH FINGER.

LIFTING COAL AN8 HURT HIS BACK.

WAS LIFTING A WHEEL & BRAKE DRUM FROM A TRUCK FELT A SHARP PAIN IN MY BACK

FOOT LODGED BETWEEN ROCK AND TREE LIMB AND CLAIMANT FELL

SLIPPED & FELL BACKWARD OFF THE DOZER LANDING ON H IS BACK.

SLIPPED ON ICE WHEN REMOVING TIRE CHAINS FROM TRUCK HE WAS DRIVING AND FELL ON LEFT HIP AND L EG PULLING HAM STRING

REPLACING SPRING ON TRUCK AND THE SPRING SLIPPED AND CAUGHT HAND TEARING IT OPEN AROUND THUMB AREA

TURNING A DRAGLINE CABLE CABLE HAD BEEN TURNED AND HOOKED UP AND WAS HOLDING CABLE OVER WITH A BAR TO INSURE IT WRAPPING INTO RIGHT GROVES WHEN ACCIDENT HAPPENED CABLE GOT TO TIGHT AND THREW T THE BAR AND BROKE HIS WRIST.

OPENED STEEL DOOR ON DRAGLINE DOOR WENT FURTHER THAN EXPECTED FINGER CRUSHED BETWEEN HANDLE AND JAM