Buscar en el registro

While laborer was cutting brush and vines, he slipped on loose gravel and banged his wrist on a dirt bank or rock.

Engineer was climbing on waste pile while surveying and when he went to turn around to look at the last set point, he felt a tear or stretch on the outer part of his left knee, causing discomfort.

While miner was changing v-belts some piece of dirt or dust flung into employees left eye causing irritation and redness.

person was welding overhead on back and piece of slag dropped behind welding hood and glasses near right eye causing discomfort to right eye.

Employee was installing 12 x 12 blocks of wood under 4600 shovel. He pushed a block under body of shovel and caught right index finger.

EE was cleaning up spilled material and twisted lower back. EE was released to return to work, however is taking 2 days off to rest.

Employee reported a small rash on arm on 9/6/09. Set up an appointment with dr after rash spread entiretrm took 1 day off to go to dr's

Employee was cleaning the mirror on his truck and it fell out. He went to grab it and cut his finger on bracket.

Employee was washing down vibrator with 1 1/2 high pressure hose. He pulled hose and slipped on wet screens.

EE was cleaning area of tail wheel when he went to move, foot got stuck and twisted knee.

EE was moving a 55 gallon drum of anti-freeze during clean-up and splashed liquid on head and then dripped into eye.

Employee was changing a return roller and a gust of wind blew dust in eye.

While splicing a conveyor belt employee felt pain in groin area as he pulled on belt.

EE was walking to work site, slipped on ice, hurt back. EE on and off work until 1/29/09.

Slaker filled with lime due to frozen water lines. Slaker needed to de cleaned by hand Injury was in process of cleaning slaker, wearing two sets of protective gloves. slake had just been installed and had been working for 24 hours.

Felt pain and tingle in wrist when moving levers. Went to doctor for exam and found out to be carpal tunnel. First day EE missed work will be 2/25/09 for operation.

Employee grabed co-worker to prevent him from falling. In the process he fell backwards causing deep bruise of butt.

Employee was cleaning up work area at the end of shift and steped on rock and twisted ankle.

Employee complained of pain in wrist. Medical exam reported it as carpal tunnel. First day missing work was 11/13/08.

An 8" slurry pipe blocked. While trying to unblock pipe, material inside discharged with force splashing employee in both eyes.

Employee was lifting 5gallon bucket over a 18" wall and twisted right knee.

Employee was air arcing & grinding in a confined space when metal flew behind helmet and into eye.

Day shift foreman found an ATV Saturday morning on job site wrecked. Informed Tamaqua police. MSHA supervisor requested a 7000-1 form.

Employee noticed anti-freeze around the radiator cap when he went to tighten the cap it popped off and sprayed anti-freeze on his back and arm.

Employee went to remove fire extingusher and release for bracket was not open fully jamming left wrist and thumb.

Employee was removing a log from screening plant when a large rock slid down belt striking leg.

Employee was taking a coal sample. He lifted a 5 gallon bucket onto truck and felt a sharp pain across lower back. Right leg went limp.

Employee picked up guard by ring (washer) that was welder on guard. Ring broke loose when removing guard-fell on his left hand

EE was replacing cable on 2400 shovel, EE was forcing cable into a loop when it slipped and flew back, struck EE on right side of his face.

Employee came into shop area, asking for help said he felt light headed and had chest pains. also felt numbness in arm.

Inspecting job site got bit by bug later in day area of bites looked infected.

Employee was using a boom truck to lift a steel plate when he set it on the truck it slipped, He went to grab it, cut his wrist.

Loader operator stepped off loader onto rock and turned over right ankle. Did not require medical attention and did not miss time. On Thurs 4/3 the employee notified employer of a personal day for Friday 4/4. On Friday morning at 0800 employee called and said ankle was swollen, and would like to see doctor. At this time claim was opened.

EE was conducting his pre-shift work-around and twisted his knee, he stepped on starting fluid can.

Employee was pulling weeds and pulled a muscle in lower back.

While fueling a truck, fuel nozzle stuck splashing employee in eyes.

Person was taking water samples and became disoriented and short of breath.

Employee was working on the repair of equipment. Lifting a gear, he went off balance, cut finger, pulled back.

Twist to right ankle turned while walking towards car.

While lifting a 5 gallon pail of oil to the back of a pickup truck, EE felt a pulling sensation in his right shoulder.

Employee was standing on a cross brace approximately 12" off the ground when he slipped off the bracing. He attempted to steady himself by grabbing an above pipe subsequently strained his left shoulder when his full body shock load was realized. Employee was not at work on 5/10 as he was sent to company doctor for further evaluation and returned to work on 5/11.

Weather related ice/snow at customer location.

Snow/Ice condition due to storm.

Weather related snow/ice

Initial report of bruise to knee, struck against a machine while performing welding duties.

Slip/Fall

Cut finger while lifting when pinched against object.

Removing mud from dozer track at end of shift to prevent freezing.

Exposure to poison ivy at substation while removing vegitation from area.

Truck driver was hauling stone and overturned his truck. He has no recolection of the accident. I\The accident was immediately reported to MSHA.