Mining Incidents

Buscar en el registro

Cada lesión y muerte que la MSHA tiene registrada. Filtra por estado, año, sector, clasificación, experiencia o cualquier palabra clave de la narrativa del investigador.

Incidentes totales
273,193
De los cuales mortales
1,202
Años en el registro
2000–2026
Clasificaciones
20
Filtros
Período
Experiencia al momento del incidente

Notifícame sobre esta búsqueda

Envíame un correo cuando un nuevo incidente coincida con estos filtros. Un correo de confirmación; cancela la suscripción cuando quieras.

El registro

11 registros en total

Mostrando los 11
15 de octubre de 2012 NC · Metal/No metálico Oficinista, Controlador de tiempo, Trabajador de oficina, Director de ventas RESBALÓN O CAÍDA DE PERSONA
American Materials Company LLC · Golpeado contra un objeto fijo

office manager was using the restroom and as she was standing from the toilet her ankle rolled causing her to lose her balance and hit her head against the wall.

27 de febrero de 2012 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MANEJO DE MATERIALES
American Materials Company LLC · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee was using a wooden block to adjust a discharge pipe underneath a screen deck. Pipe came apart and employee's finger was wedged between the pipe and wooden block causing a laceration that required 8 stitches.

21 de enero de 2011 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador OTRO
American Materials Company LLC · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

Employee was measuring the sheave sizes on the gearbox end of a Eagle 44" fine material washer. The guard that surrounds the sheaves had been open to obtain the measurements. As the wind blew the guard back to the closed position, the employee's left thumb was cut and received 10 stitches.

7 de enero de 2011 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
American Materials Company LLC · Golpeado por... no clasificado en otra parte

A right handed employee was using a pocket knife to cut the tail off of an electrical tie. As the knife cut the tie, the blade cut the wrist of the employee, requiring 4 stitches.

14 de mayo de 2008 NC · Metal/No metálico Ensayador, Geólogo, Metalurgista, Ingeniero, Gerencia de ingeniería RESBALÓN O CAÍDA DE PERSONA
American Materials Company LLC · Caída a la pasarela o superficie de trabajo

Office Manager was walking in the yard of the scale house to communicate with a truck driver and step on an unlevel area of the lot and spranined her ankle. She landed on her knee and received 4 stitches in her knee.

11 de octubre de 2006 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador MAQUINARIA
American Materials Company LLC · Contacto con objetos o sustancias calientes

The miner was using a oxygen/acetyline torch to remove a bolt. The "slag" from the process ignited the right pants leg of the miner. The miner received second degree burns on his right leg.**Mgt. notified & miner decided Oct 16 to receive treatment. Miner was released to work Oct 26 with restrictions but did not return until Oct 19.**

22 de abril de 2006 NC · Metal/No metálico Operador de bulldozer, Operador universal, Operador de equipo pesado, Ingeniero operador HERRAMIENTAS MANUALES (SIN MOTOR)
American Materials Company LLC · Golpeado por objeto proyectado

The employee was assisting the plant manager in replacing bucket teeth on an excavator. The plant manager was using a hammer to remove the teeth when a piece became airborne and hit the employee below the left eye. The employee was standing approximately 10 feet away and was not wearing safety glasses. No stitches were required.

28 de diciembre de 2004 NC · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina RESBALÓN O CAÍDA DE PERSONA
American Materials Company LLC · Caída a la pasarela o superficie de trabajo

EE fell after slipping on ice after an ice storm. He struck his knee on the ground and caused a contusion. EE was performing startup operations on the plant when the injury occurred and was on the ground level.

29 de febrero de 2004 NC · Metal/No metálico INUNDACIÓN
American Materials Company LLC · Tipo de accidente, sin lesiones

Sediment pit over-filled due to pump failure. water ran over containment dam into dewatering area. Incident occurred on Sunday afternoon and no one was working in the area at the time.

16 de julio de 2003 NC · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla RESBALÓN O CAÍDA DE PERSONA
American Materials Company LLC · Caída desde una máquina

THE INJURY TO EE'S FOREHEAD WAS A DIRECT RESULT OF LOW OXYGEN LEVELS IN THE BLOOD STREAM. HE RECEIVED A PACE MAKER THE FOLLOWING DAY TO CORRECT THE HEALTH RELATED PROBLEM. EE BEGAN TO FELL FAI NT WHILE OPERATING THE LOADER & HE ATTEMPTED TO EXIT THE CAB. WHILE CLIMBING DOWN THE STEPS, HE PASSED-OUT & STRUCK HIS FOREHEAD ON THE STEP. HE RECEIVED 10 STITCHES TO TREAT THE LACERATION.

16 de agosto de 2000 NC · Metal/No metálico Encargado de mantenimiento, Mecánico, Reparador/Encargado de servicio, Calderero, Abastecedor de combustible, Técnico de llantas, Técnico de servicio en campo RESBALÓN O CAÍDA DE PERSONA
American Materials Company LLC · Caída a la pasarela o superficie de trabajo

THE INJURY OCCURRED WHILE WASHING MATERIAL FROM UNDER PLANT. HE WAS LEANING AGAINST 10" PIPE AND LOST HIS BALANCE AND FELL ON HAND.

Mostrando los 11