Buscar en el registro

Employee was carrying the spare mantle when it slipped from their hands and hit the concrete it bounced back and struck their tooth. Causing a chip in their tooth.

Employee was working with ladder when they pinched a finger at the back of the truck causing a laceration to their R pinky finger. 5 sutures required.

Employee was cleaning rejects at the rodmill discharge and right elbow started hurting. employee became reportable restricted on 09/10/2026.

Employee was aligning the top of the cyclones with a wrench when the wrench slipped out of position causing the cyclone top cover to cause a laceration to the R index finger.

Employee was exiting off of machine, stepped down onto step and foot slipped and fell to ground, resulting in laceration to the left eyebrow, received 12 sutures.

on 8/11/2026 the company was notified it was deemed as a work-related injury. Employee engaged in non-work-related activities by rushing down the stairs to give another employee a fork when EE slipped and fell resulting in a lumbar compression fraction

Employee was diagnosed by a doctor with a standard threshold shift in hearing in the left ear. The hearing loss is consistent with noise induced loss.

The injured employee was working with another employee to move a valve from one pallet to another. The valve slipped from the grasp of the helper's hand and came down on the injured employees right hand causing a crushing injury to the middle finger tip.

Employee swung a hammer at a rigging strap, EE missed the rigging strap, and the momentum of the swing caused EE to strike the chute liner with EE's left hand causing the hammer to hit EE's L index finger. Gloves were worn. Six sutures were required.

EE was assisting another employee that was working on a dozer when EE's left middle finger got in the way of the hammer and was struck causing EE to need 2 sutures.

Employee was assisting with 518 hoist rope change out. While pushing on prybar to push the rope employee strained EE's L arm.

stepped off concrete pad hyperextending left knee, received restricted duty

Employee was walking from bay 7 to bay 12 to help GR573 cutting edges, while walking across yard they stepped in a hole felt right knee pain. They became a lost time on 04/15/2026 due to right knee sprain.

Employee was walking through warehouse when their R knee strained due to pothole in walkway.

Employee was crawling out of CR02 chute after using a jack hammer to break rock plugging chute. Employee was pushing the jackhammer in front of EE. it caught a rock causing the bit end to pop up towards the employee, striking EE in the teeth. resulting in a broken tooth.

Operator was changing out a bit; they stepped off of the deck and when their left foot made contact with the lower deck of the drill, they felt their left ankle roll to the outside and felt sharp pain in the left knee.

Employee was diagnosed with a standard threshold shift by Dr on 03/19/2026, this hearing loss is consistent with noise induced loss in the left ear

EE was stepping off the Haul Truck ladder onto uneven ground, when EE felt and heard a loud pop, and states EE felt instant pain.

Operator was stepping off of pickup truck and right food stepped in a hole and rolled right ankle, resulting in a sprain. restricted duty began on 12/11/2025

The driver was completing a pre-trip inspection on the trailer. Driver was crouched down and stood up, thinking they had enough clearance, and hit their head on the trailer. Driver was wearing a hard hat, which compressed their neck.

Employee was screwing into plastic reputs. Due to prescribed antibiotics employee developed Photophobia.

Employee was using a hammer on a metal bolt when debris went into R eye

While installing a shock brushing in truck 143's lower A arm, EE went to knock it in with a hammer, EE missed striking EE's Right thumb. received 6 sutures

As the employee was ascending the ladder, felt a pop in left shoulder

Employee picked up a plywood bulkhead for a concrete form and when they turned to put it in place it caused a strain in their back.

Employee was diagnosed with a standard threshold shift by a doctor on 09/18/2025. This hearing loss is consistent with noise induced in the left and right ear.

When they placed a hand up to stop the door/panel from slamming, their left ring finger went into the hinge section. When the door closed it caused injury.

When checking spigots at tailings walking, they lost footing and fell into a ravine/ditch onto their chest.

Employee was picking up a 5-gallon bucket of ore one handed when they felt a pop and pain in right shoulder

An employee missed a step on the truck step ladder and fractured EE's right leg. EE was in the process of unloading a delivery to the Mission magazine when incident occurred.

Employee was diagnosed with a standard threshold shift by doctor on 08/12/2025. This hearing loss is consistent with noise induced loss in the left ear.

Contractor employee was tightening bracket on the pulverizer when they felt their right thumb pull back

Employee was feeding a cathode through the roller when the end of the cathode grabbed the tip of their left middle finger and pulled their hand into the guard. Resulted in avulsion of left middle finger tip.

Dump bed fell from cribbing causing multiple fractures to hand

Employee was installing a new bearing using a 10lb sledgehammer when they hit their foot just past the steel toe. resulting in the fracture of the minimus pedis (Little toe)

Employee was performing EE's area work inspection when EE slipped and heard a pop in the right knee. Resulted in aggravation of old knee injury.

Employee was walking in the tie down area around the water truck, when they slipped and landed on their right wrist, resulting in a fracture. Employee was placed on restricted duty.

Employee lost EE's footing and stumbled causing EE to lacerate EE's head on a steel window frame of a connex box. Employee received 6 Staples

Employee was dismounting from equipment. While activating the ladder to exit, they began descending before the ladder had fully reached the ground. As a result, the ladder accelerated rapidly. This sudden movement caused employee to lose balance and fall sustaining injuries.

On 05/08/25 employee struck in arm by foreign object did not report the incident. The following week the incident was reported. Foreign body removed. 4 stitches received. Notified 05/27/2025 that the injury was accepted as an industrial injury.

Employee was walking in a dim area when EE tripped and fell over forks from a forklift, resulting in right shoulder pain. On 4/22/2025, employee was placed on Restrictive Duty

Injured employee was spinning a pulley sheave by hand to remove an impeller and caught two of EE's left fingers in the belt. EE's left middle finger was badly lacerated and EE's left ring finger sustained a fracture.

While dismounting a trailer, Temp employee encountered a loose step causing EE to fall 3 feet onto ground scratch on left elbow and left foot pain resulted in left foot fracture.

Employee was drilling a hole in a new disconnect box. The drill bit got caught and pulled the box into employee's hand. Caused a cut and tuft fracture to right index finger.

Assigned to change out a steering pump and in process used a come-along to hoist up pump into place, felt a pop in left bicep

Employee was washing under the 219 ball mill. Employee crossed over the 212 cyclone feed pump discharge line by stepping on the angle iron brace supporting the pipe. While stepping over, employee slipped and rolled an ankle. Employee was placed on restricted duty 02/18/2025.

Employee was diagnosed with a standard threshold shift by Dr. on 02/13/2025. The hearing loss is consistent with noise induced loss in the right ear.

Employee was using 1 inch impact gun on bolt under truck. Bolt was not coming off causing the employee to adjust position. As employee was adjusting the impact gun it bounced back hitting employees face causing a small chip top of *R* tooth. 4/10/25 EE did elect to repair tooth, dental work completed

Employee noticed idler that was frozen and attempted to free this idler up using a pry bar, the prybar was grabbed by the running Conveyor and pulled in between the trougher idler and the Conveyor belt, this caused the base of the prybar to smash the employee's left hand between the frame and the Prybar.

Cutting tape on middle slim, hit a tough spot, applied more pressure hand slipped and cut left knee, 7 stitches received.