Search the record

WHILE CLEANING OUT A CONCRETE MIXER DRUM USING A JACKHAMMER, ONE PIECE DISLEDGE ABOVE HEAD & FELL STRIKING HEAD KNOCKING OFF HARD HAT & CUTTING HIS HEAD. THE CUT REQUIRED 5 STITCHES WHICH ARE CLOSE TO THE HARD HAT LINE MAKING IT IMPOSSIBLE TO WEAR HARD HAT SO LOST TIME HAS RESULTED.

EMPLOYEE NOTICED THAT THE TORCH LINE HAD A FLAME IN IT. HE REACHED TO EXTINGUISH IT AND THE LINE POPPED CAUSING THE FLAME TO BURN THROUGH HIS GLOVE.

WHILE GRINDING THE BIN WALL, DIRT & METAL PARTICLE LODGED IN EE'S LEFT EYE. EYE PROTECTION WAS BEING WORN, BUT THE PARTICLE ENTERED FROM THE SIDES. EE FELT DISCOMFORT THE NEXT DAY & WENT TO HI S PERSONAL PHYSICIAN.

WHILE CUTTING OLD CONCAVE FILLER RING, SOME MATERIAL BLEW BACK BURNING NECK AND EAR.

EMPLOYEE CAUGHT HIS LEFT FOOTBETWEEN THE CARROUSEL & BAR WHILE STANDING ONTHE MAST TABLE SO HE COULD REACHTHE BARS MOREEASILY ON AN 11 DEGREE ANGLE HOLE

WHILE CLEANING A ZINC POUR HOLE IN JAW MAIN FRAME WITH TORCH, FOREIGN OBJECT FLEW PAST PROTECTIVE SHIELD AND INTO EE S EYE.

EE WAS LIGHTING CUTTING TORCH AND EXPLOSION RESULTED FR4OM ACETYLENE IGNITED BACK THROUGH THE HOSE.

EE USED A CHIPPING HAMMER AS A PRY BAR TO ALIGN A SKIRT BOARD THE HAMMER SLIPPED STRIKING HIS BOTTOM LIP

BURN FROM TORCH TO THE RIGHT HAND.

WHILE GRINDING PIECE OF STEEL WHEEL BOUND ON STEEL CAUSING GRINDER TO FLIP OVER STRIKING HAND STITCHES REQUIRED

WHILE DRILLING HOLES IN CENTER PLATES ON SCREEN THE BIT BOUND UP CAUSING THE DRILL TO JERK AROUND.

EMPLOYEE CAUGHT HIS FINGERS IN A SHEAVE ON THE CRANE OVER THE PRIMARY CRUSHER WHILE PULLING ON THE CABLES TO LINE UP THE HOOK.

WHILE GRINDING ON TABLE BUSHING ON DRILL WITH SMALL AIR GRINDER AND 2 INCH DIA X 1/2 INCH 1/4 INCH SHANK GRINDING WHEEL WHEEL BROKE APART AND STRUCK EE IN LEFT EYE.

INJURED WAS LYING ON RIGHT SIDE GRINDING LOWER EDGE OF SPIDER FOR 42-65 CRUSHER WHEN GRINDER WHEEL STRUCK CRIBBING AND WHEEL SHATTERED AND STRUCK RIGHT SIDE OF FACE CAUSING LACERATION.

INJURED WAS WORKING AT 42-65 PRIMARY AND DURING THE COURSE OF HIS DUTIES HE FELT DISCOMFORT IN HIS LEFT EYE. SMALL PIECES OF STEEL IN EYE.

WHILE WELDING A PIECE OF HOT SLAG GOT INTO GLOVE AND BURNED HIS HAND. EE RECEIVED 2ND AND 3 RD DEGREE BURNS TO RIGHT HAND.

WHILE CHIPPING FRAGMENT FLEW UNDER SAFETY GLASSES INTO EYE. DID NOT EFFECT EYE UNTIL LATER WHEN IT STARTED TEARING DURING NIGHT & NEXT MORNING.

WHILE WELDING CRACK IN SIDE OF BARGE EMPL LIFTED SHIELD TO CHIP LOOSE MATERIAL FROM AREA HE WAS WORKING ON. SMALL PARTICLE OF RUST BLE INTO LEFT EYE.

WHEN DOWN INSIDE JAW CRUSHER WELDING, LOOSE STONE FELL OFF FEEDER ABOVE AND STRUCK INJURED ON BACK OF HEAD.

EMPLOYEE WAS BURNING A PICE OF STEEL INSIDE A CHUTE;WHEN HE ATTEMPTED TO RE-ADJUST HIS POSITION HE BURNED HIS RIGHT LEG.

LOCK HANDLES ON OUTRIGGERS ON P&H CRANE STRUCK EMPLOYEE ON RT MIDDLE FINGER HANDLE SWUNG OVER AT A HIGH RATE OF SPEED & EMPLOYEE WAS NOT ABLE TO REMOVE HIS HAND IN TIME

WHILE WELDING,EMPL FELT SOMETHING IN EYE.REMOVED SHIELD AND GLASSES AND WIPED HIS EYE.EMPL MAY HAVE WIPED PIECE OF METAL INTO RIGHT EYE.

EMPL WAS DRILLING HOLE IN SIDE OF SCREEN DECK. MAGNATE DRILL GOT UNPLUG & FELL THREE FEET ON EMPLS RIGHT FOOT.

METAL AND ABRASIVE GRINDINGS ENTERED RIGHT EYE WHILE GRINDINGS SHEET METAL HOOD EE DISMISSED IRRATATION AS DUST UNTIL 7-19-90. IT APPEARS THAT GRINDINGS MAY HAVE ENTERED THE EYE AROUND THE EE S GLASSES.

REMOVING STEEL FROM RAISED BOOM OF ROCK DRILL,A COUPLING FELL GLANCING OFF EMPL HARDHAT BEFORE STRIKING EMPL BELOW BASE OF NECK.

WHILE CUTTING A LARGE PIN ON LOADER, THE ROD BLEW OUT ON THE SIDE AND BURNED THROUGH GLOVE.

WHILE BURNING SOME STEEL, HOT DEBRIS SHOT OUT AND WENT BEHIND GOGGLES INTO EYE.

HOISTING DRILL STEEL ON DRILL HE CAUGHT FINGERS IN WINCH CABLE .

WHILE PICKING OUT STONE FROM JAW CRUSHER, STONE FROM ABOVE ON FEEDER BELT LOOSENED AND SLID ON TO HIM.

HIS EYE BECAME SWOLLEN AND PAINFUL. I,NAME WAS HELPING A WELDER INSTALL DECK PATCH AND WAS EXPOSTED TO WELDING ARC.

I,NAME WAS REPLACING A SNUB PULLEY WRAPPER ON RC 4 CONVYEOR AND RECEIVED A WELDING FLASH.

EMPLOYEE WAS HIT IN THE RIGHT EYE BY A SMALL STONE CHIP WHILE USING A JACK HAMMER AT THE PRIMARY. EMPLOYEE WAS ATTEMPTING TO FREE A LARGE STONE.

WHILE STEAM CLEANING COMPRESSOR, I.NAME SLIPPED AND HIT HIS FACE WITH STEAM CLEANER NOZZLE AND STEAM SOLUTION.

WHILE CUTTING PLATE & TORCH SPIT BACK SLAG AT EMPL.

BLOW HOSE COME OUT OF HOLE AND HIT INJURED IN MOUTH, REQUIRING 4 SITICHES ON INNER SIDE OF LOWER LIP OF MOUTH.

WHILE HE WAS USING CUTTING TORCH, HOT METAL FELL INTO HIS BOOT, BURNING BOTTOM OF RIGHT FOOT.

WHILE JACK HAMMERING PAVEMENT IN MILL HAMMER BOUNCED THROWING HAND ONTO UNDERSIDE OF CONVEYOR.

WHILE BURNING PIECE OF SCREEN CLOTH PIECE OF SLA FLEW OVER ON HIS PANTS BURNED THROUGH CAUSING BURN ON RIGHT KNEE WHICH SHORTLY THEREAFTER BECAME INFECTED.

HEAVY COUPLING FELL FROM DRILL HAMMER AND STRUCK RIGHT HAND WHICH WAS RESTING ON CONTROL LEVER. EMPLOYEE CARELESSNESS.

PARTICLE FROM GRINDING OPERATION.

WAS STANDING ON SPRAY BAR ON #3 DECKER WASHING SCREEN, PULLED ON AIR HOSE, HOSE LET GO AND HE SLIPPED. HE HIT WRIST ON ONE OF THE OTHER SPRAY BARS.

WHILE ADJUSTING3THROTTLE ON PORTABLE WELDING UNIT, HAND SLIPPED AND STRUCK RADIATOR FAN.

HOSE ON SAFETY 9ELIEF VALVE OF IR 1400 COMPRESSOR #508144 HIT I.NAME IN FACE NOTE LOST TIME EFFECTIVE 102987 RETURNED TO WORK 110387 OUT AGAIN 110987

WHILE USING AN 5IR-OPERA TED GREASE GUN THE HOSE THAT WAS CONNECTED TO GREASE FITTING RUPTURED CAUSING A PUNCTURE WOUND TO HIS LEFT HAND

WHEN PULLING ON3GAS ENGINE STARTER ROPE,THE HANDLE BROKE APART AND THE PIN HOLDING HANDLE TO ROPE CUT FINGER.

BURNING BOLT,PI9CE OF SLAG DROPPED OFF AND WENT INTO SHOE CAUSING BURN TO RIGHT ANKLE.

HE WAS DRILLING3WITH A LARGE MASONRY DRILL INTO CONCRETE BLOCKS TO ATTACH ANCHORS FOR INSTALLING SAFETY HANDRAILS.THE DRILL CAUGHT IN THE BLOCK ADN TWISTED HIS HAND.HE BROKE THE BONES IN THIS RIGHT HAND. 3

CUTTING BOLT OV9RHEAD WITH CUTTING TORCH,HOT PIECE OF BOLT FELL LANDED ON HIS ARM.

WORKING ON PLAN7 WITH AIR COMPRESSOR AND THE HOSE UNCOUPLED AND HIT MAN ON THE ARM.

WELDING A BOX A3D HOT SLAG WENT DOWN HIS BOOT.