Search the record

Truck driver was hauling gold ore to the plant. While descending the roadway from the mine, the victim lost control of truck. Went up embankment & over an appox drop 20' drop landing back in the roadway. The victim was transported to the hospital & died of injuries several days later.

Wash plant operator was operating a front-end loader during the overnight shift as normal. EE exited the loader and entered the hopper filled with sand the EE had just dumped. EE was fatally injured when they were engulfed in the sand, as it vibrated to the bottom of the hopper. EE may have entered the hopper to try to retrieve two pieces of metal inadvertently dumped into hopper.

During Longwall setup procedures, two service representatives from shield manufacturer were installing yield valves on shields. The deceased was positioned behind leg jacks installing yield valves on tilt jack, while second representative began to install yield valves on leg jack. Plugs from both jacks were removed causing the shield canopy to collapse crushing the victim.

Per MSHA Preliminary Report: The screen plant was being attached to a front-end loader in preparation of being moved into the pit. The victim was proceeding to hook them together when the equipment moved, pinning the victim. The victim was later discovered injured and leaning against the loader bucket. The victim died of their injuries the following day.

On 9/21/16, evidence suggests that the victim, an experienced mechanic, may have been attempting to remove or loosen the top drive power head, spindle cap on the drill machine to replace damaged seals by attempting to use a pipe wrench and hydraulics of the drill machine, which are controlled by levers in cab next to platform. Victim struck in torso by pipe wrench. No eyewitness.

Employee fell off the back of #62A loader landing on upper back/neck/shoulder.

Employee was fatally injured when the haul truck employee was operating drove off the haul road and fell into the quarry pit below

Employee was changing a cable pulley that raised and lowered a load spout. While installing the new pulley, something broke. The cable struck the employee in the head area fatally injuring the employee. The investigation is still ongoing to determine the exact cause.

On 7/29/16, employee and co-worker were re-welding guards over the drive shaft of the turbine pump located on the surface above the #3 Shaft. Shortly after welding was completed, an ignition occurred in the #3 Shaft and employee received significant burns and lacerations. The investigation of this event is on-going. Employee died from the injuries on 8/4/16.

The injured employee was working in the North East corner of the pit loading shot rock. While waiting for the haul truck to return to the muck pile, the excavator was struck by several large rocks. No one witnessed the accident. The haul truck driver discovered the accident scene and rescue/recovery efforts begun. The excavator operator was fatally injured.

A Cat D250E haul truck was positioning to dump a load of material. The employee stopped three times before going backwards over the highwall.

Oil leak was noticed during operation of the end loader. Foreman instructed operator to block the machine & went to get oil. Returned & found EE under the machine looking for the leak. Loader had been raised by tilting the bucket on the ground. Foreman got under machine to help look. Machine came down on top of them shortly after that, just as foreman saw that it was not blocked.

A track hoe was loading a haul unit with gravel to take to wash plant and the dam on a slush pond broke and covered up both the tack hoe and the haul unit with the workers in them.

A haul unit was being loaded by a track hoe and a slush pond dam broke and the slush came down on top of them burying them.

Diesel Motor operator was found on the motor unresponsive, the exact cause of death is unknown at this time.

Employee was found on the floor of the #2 slurry tank. Employee had significant head injuries and was pronounced dead by the Justice of the Peace. The accident scene is currently under a Section 103(k) order and subject to MSHA investigation.

During regular duties the operator of the dozer stopped, exited the cab, and the dozer rolled back crushing the operator.

Employee went to prime the diaphragm pump located outside the stripping machine building, adjacent to the hydraulic room. Eight minutes pass where EE is unaccounted for prior to being found unresponsive, kneeling in liquid, face against the stainless steel flange of the tank house return HDPE line.

While workers were cleaning up material that was removed from a new coal transfer borehole using a continuous miner, a section of rib/brow fell from the inby portion of the entry and continued outby pulling rib bolts. The material rolled down the rib and struck the miner operator causing fatal crushing injuries to chest and abdomen.

On March 22, 2016 at approximately 6:35pm an employee was struck by flyrock after a shot was detonated. The employee was sitting inside of a pickup approximately 1,200 feet away from the shot when detonated. This incident resulted in a fatality.

Employee was driving a 70 ton CAT 775E haul truck equipped with reverse sonar. Evidence shows the employee backed through a berm approx. 4 ft high and down a slope that was 70 ft. high. The truck came to rest in an area of water spprox. 15 ft. deep. Employee was pronounced deceased on scene by medical emergency personnel.

An All-Terrain Forklift was unloading a trailer of poly pipe. While the All-Terrain Forklift was traversing away from the trailer, a single piece of pipe fell on the driver's side of the truck.

Employee was in preparation to mine the No. 6 Left Crosscut when EE became pinned between the tail of the machine and the coal rib, resulting in fatal crushing injuries.

A coal rib fell, striking the continuous miner operator, causing a fatal injury.

There were no witnesses to the event. Employee was found with right arm caught by the hold up roller of the remote discharge of the #1 conveyor. When found by crew members, employee was not responsive. Employee was transported to the surface when employee was pronounced deceased.