Laborer
Employee was watching the cable on the dolly when the rib rolled off crushing him. Rib measured approximately 82 by 36 by 11 inches.
Texto original en inglés de la MSHA
On Wednesday, June 29, 2011, at approximately 11:15 a.m., a 49 year old continuous haulage cable attendant (dolly man) received fatal injuries when a large section of rock measuring approximately 82 inches long, 36 inches wide, and 11 inches thick fell from the rib and knocked him into the dolly. There were no witnesses to the accident. It appears that during the mining process, the continuous haulage system backed up, causing the dolly to move along the lo-lo (belt) structure and apparently dragging the victim from beneath the fallen material.
-
The operator failed to support or control the mine rib to prevent the large rib failure, which resulted in fatal injuries to the continuous haulage cable handler.
Acción correctiva: The operator has developed and submitted an update with comprehensive rib control measures as a portion of the Roof Control Plan.
-
The operator failed to instruct foremen adequately with regard to properly identifying hazardous conditions.
Acción correctiva: The operator conducted and documented training on the proper identification of hazardous conditions with the miners as well at all other company-controlled mines. The miners were instructed to report to mine management immediately any hazardous conditions observed.
-
The operator failed to have in place an adequate roof control plan addressing proper support of mine ribs in changing geological conditions and to support the ribs properly on the 002 MMU.
Acción correctiva: The operator has developed and submitted a revision to the current roof control plan, which has been approved. The revision states the corrective actions that will be taken to support rib conditions when encountering various heights and geological conditions.
-
The operator failed to conduct adequate pre-shift and on-shift examinations on the 002 MMU. Uncorrected roof and rib conditions existed during the shift, which posed hazards to the miners. None of the hazardous conditions, including hazardous ribs, were recorded in the preshift or on-shift examination books.
Acción correctiva: The operator conducted and documented safety meetings with all employees on identifying and recording hazardous conditions properly.
Hallazgos del informe final de investigación de la MSHA, que sustituye la narrativa preliminar anterior.
- Actividad al momento del incidente
- Move Power Cable
- Subunidad / ubicación
- UNDERGROUND
- Ubicación subterránea
- FACE
- Método de minería
- Continuous Mining
- Tipo de accidente
- Golpeado por objeto que cae
- Fuente de la lesión
- CAVING ROCK,COAL,ORE,WSTE
- Naturaleza de la lesión
- CRUSHING
- Parte del cuerpo afectada
- MULTIPLE PARTS (MORE THAN ONE MAJOR)
- Experiencia minera total
- 16 years
- Experiencia en esta mina
- 0 years
- Experiencia en este puesto
- 0 years
- Grado de la lesión
- FATALITY
Cada registro de esta página refleja lo que publica la MSHA en su programa de Datos Abiertos del Gobierno, actualizado semanalmente. La MSHA no publica URLs por accidente (los datos de Accidentes se distribuyen en un único archivo masivo), así que esta es la forma de recuperar la fuente del registro específico a continuación:
- Informe final de investigación: Lee el informe final de la MSHA
-
Registro del accidente:
Descargar MSHA Accidents.zip
luego busque el número de documento
220111890030(la clave única por Formulario MSHA 7000-1) -
Registro de la mina:
Sistema de Recuperación de Datos de Minas de la MSHA
y busque por ID de mina
1519102 - Todos los conjuntos de datos de la MSHA: Directorio del programa de Datos Abiertos del Gobierno que cubre Accidentes, Minas, Inspecciones, Infracciones, etc.