Mining Incidents

Hurtsboro Plant Metal/Non-Metal

Controlada por USS Holdings Inc
Hurtsboro, Russell Condado, AL  ·  Activa
ID de mina MSHA: 0100617

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Hurtsboro Plant.

Muertes
0
Incidentes totales
5
Años en registro
2001–2023
Último incidente
Jan 2023
Historial de cumplimiento
Citaciones de MSHA desde 2001
59
citaciones
8
significativas y sustanciales
$7,670
multas propuestas
$6,462
pagado a la fecha
Fuente: datos de violaciones de MSHA, actualizados semanalmente.
Tasas de seguridad trimestrales
Citaciones por millón de horas trabajadas, según lo reportado a MSHA
Trimestre Horas trabajadas Citaciones S&S Por 1M hrs
2025 Q4 5,774 0 0 0.0
2025 Q3 4,680 0 0 0.0
2025 Q1 5,644 1 0 177.2
2024 Q3 1,074 0 0 0.0
2024 Q1 5,346 0 0 0.0
2023 Q4 4,542 0 0 0.0
2023 Q3 4,162 0 0 0.0
2023 Q1 5,922 0 0 0.0
Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.
No se registran muertes en esta mina.

Incidentes reportables

5 en archivo

2023 · 1 incidente

31 de enero de 2023 AL · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla RESBALÓN O CAÍDA DE PERSONA
U.S. Silica Company, LLC · Sobreesfuerzo, no clasificado en otra parte

EE descending ladder of loader and felt a discomfort in left shoulder. Medical consultation resulted in restricted duty.

2008 · 2 incidentes

28 de noviembre de 2008 AL · Metal/No metálico IGNICIÓN O EXPLOSIÓN DE GAS O POLVO
U.S. Silica Company, LLC · Tipo de accidente, sin lesiones

During a holiday weekend while the equipment was not running, a propane vaporizer that had recently been refurbished had a gas regulator fail causing a localized fire in the vaporizer. The fire spread to the second vaporizer before the fire department could extinguish the fire. Damage to equipment is estimated to be approximately $6,000.

26 de junio de 2008 AL · Metal/No metálico Capataz de exterior, Cabo HERRAMIENTAS MANUALES (SIN MOTOR)
U.S. Silica Company, LLC · Golpeado por... no clasificado en otra parte

The seal around the sand cooler cleanout access door was being replaced. Excess gasket material was being trimmed from around the outer edges. A utility knife was being used to trim the hard gasket material. Employee was cutting the gasket material using his right hand when the knife slipped off the gasket and made a 3" cut on the underside of his left forearm, requiring stitches.

2001 · 2 incidentes

26 de julio de 2001 AL · Metal/No metálico Minero, no clasificado en otra parte HERRAMIENTAS MANUALES (SIN MOTOR)
U.S. Silica Company, LLC · Atrapado en, bajo o entre, no clasificado en otra parte

INJURED, ALONG WITH OTHER CO-WORKERS PULLED DISCHARGE BEARING COVER AWAY HANGING ON CHAIN FALL.LIFTED BEARING. MADE INSPECTION(VISUAL). PUT BEARING BACK AND ROLLED TO BOTTOM. BEARING ROLLED QU ICKLY AND INJURED HAD HOLD OF EYE BOLT WITH SHACKLE WHEN HAND WAS PINCHED BETWEEN BEARING AND CAP DURRING ROTATION.

10 de enero de 2001 AL · Metal/No metálico Minero, no clasificado en otra parte TRANSPORTE MOTORIZADO
U.S. Silica Company, LLC · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

ASSISTING LEADMAN IN COUPLING TRAILER TO MAINENENE VAN. AFTER LOWERING HITCH ONTO BALL, EE PUT HIS FINGER BETWEEN BALL & HITCH TO CHECK CONNECTION.LEADMAN SHUT OFF VAN & TOOK HIS FOOT OFF BRA KE. THIS CAUSED A SLIGHT MOVEMENT OF HITCH & BALL. EE'S FINGER WAS PINCHED BETWEEN HITCH & BALL POOR COMMUNICATION & INATTENTION TO DETAIL OFTASK AT HAND CAUSED THIS ACCIDENT