← Volver a la búsqueda

Collinsville Rock Quarry Metal/Non-Metal

Blount Springs Materials Co Inc · Surface

Controlada por Robert D Heatherly

Attalla, Etowah Condado, AL · Abandoned

ID de mina MSHA: 0103199

Seguir esta mina

Avísenme cuando se presente un nuevo incidente de la MSHA en Collinsville Rock Quarry.

Muertes: 0
Incidentes totales: 6
Años en registro: 2000–2013
Último incidente: Feb 2013

Historial de cumplimiento

Citaciones de MSHA desde 2001

citaciones

significativas y sustanciales

$11,092

multas propuestas

$10,606

pagado a la fecha

Fuente: datos de violaciones de MSHA, actualizados semanalmente.

Tasas de seguridad trimestrales

Citaciones por millón de horas trabajadas, según lo reportado a MSHA

Trimestre	Horas trabajadas	Citaciones	Por 1M hrs
2019 Q4	205	0	0.0
2019 Q3	1,264	0	0.0
2019 Q2	3,567	0	0.0
2019 Q1	2,561	0	0.0
2018 Q4	3,070	1	325.7
2018 Q3	2,196	0	0.0
2018 Q2	2,545	0	0.0
2018 Q1	2,934	2	681.7

Los trimestres con menos de 100,000 horas reportadas aparecen atenuados: muy pocas horas para una tasa estable.

No se registran muertes en esta mina.

Incidentes reportables

6 en archivo

2013 · 1 incidente

15 de febrero de 2013 AL · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina HERRAMIENTAS MANUALES (SIN MOTOR)

Blount Springs Materials Co Inc · Atrapado en, bajo o entre objetos en movimiento o engranados

Individual was welding a Taper bushing that had broken out of a head pulley drum back into place. He was using a chain hoist to pull the shaft and the bushing back into place when the hoist slipped rotating the shaft that was attached to the drive pulley. Individual had his hand on the pulley and his thumb was pulled between the pulley and the drive belt.

2003 · 1 incidente

24 de marzo de 2003 AL · Metal/No metálico Cargador frontal, Operador de pala-traílla, Operador de traílla, Cargador (payloader), Operador de equipo de traílla RESBALÓN O CAÍDA DE PERSONA

Blount Springs Materials Co Inc · Caída desde una máquina

MINER WAS ASCENDING THE LEFT LADDER ON A FRONT END LOADER WHEN HE FELL/ SLIPPED FROM THE 2ND STEP FROM THE BOTTOM. THE MINER'S SHOES WERE COVERED IN OIL WHICH WAS BLOWN ON THE MINER WHEN HE OPENED THE PRESSURIZED TRANSMISSION FILL PORT WHILE THE LOADER WAS RUNNING.

2002 · 1 incidente

9 de agosto de 2002 AL · Metal/No metálico Conductor de camión MANEJO DE MATERIALES

Blount Springs Materials Co Inc · Sobreesfuerzo al levantar objetos

EMPLOYEE (MINER) WAS INVOLVED IN A ROCK TRUCK ACCIDENT RESULTING IN $200 +/- DAMAGE TO TRUCK PROMPTING A DRUG TEST. UPON NOTICE THAT HE WOULD BE REQUIRED TO TAKE A DRUG TEST, HE TOLD US HE INJ URED HIS BACK HELPING TO INSTALL TAIL ROLLERS FOR A CONVEYOR AT OUR WASH PLANT. THE INJURY TO HIS BACK OCCURRED 8/9/02.

2000 · 3 incidentes

15 de diciembre de 2000 AL · Metal/No metálico Almacenista, Ensacador, Paletizador/Apilador, Encargado de almacén, Empacador, Fabricante, Operador de planta de lavado TRANSPORTE MOTORIZADO

Blount Springs Materials Co Inc · Atrapado en, bajo o entre un objeto en movimiento y uno fijo

EE WAS ATTEMPTING TO START A RANGER PICKUP TRUCK BY POURING GAS INTO THE CARBURATOR. THE TRUCK RAN OUT OF GAS ADJACENT TO THE QUARRY FUELING AREA. A ROCK TRUCK WAS REFUELED. THE DRIVER OF THE ROCK TRUCK PROCEEDED TO MAKE A RIGHT HAND TURN. THE PICKUP WAS IN THE ROCK TRUCK DRIVER'S BLIND SPOT. ROCK TRUCK HIT THE PICKUP KNOCKING THE EE TO THE GROUND AND RAN OVER HIM.

22 de agosto de 2000 AL · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina MANEJO DE MATERIALES

Blount Springs Materials Co Inc · Atrapado en, bajo o entre, no clasificado en otra parte

BROKE FIRST FINGER AND MASHED 1ST AND 2ND FINGER ON LEFT HAND. WAS CAUGHT BETWEEN V BELT AND PULLEY WHILE ATTEMPTING TO REPLACE BELTS.

17 de julio de 2000 AL · Metal/No metálico Obrero, Herrero, Cuadrilla, Mensajero de repuestos, Peón, Recolector, Operario de mina RESBALÓN O CAÍDA DE PERSONA

Blount Springs Materials Co Inc · Caída sobre o contra objetos

EMPLOYEE WAS MOVING A BELT ROLLER TO ITS INSTALL POINT WHEN HE SLIPPED AND FELL, HE FELL ACROSS A PIECE OF FLAT METAL AND HIS WRIST WAS CUT ACROSS THE EDGE OF THIS METAL. ONSTRUCTION PHASE.