Avísenme cuando se presente un nuevo incidente de la MSHA en #44.
WATER IN TOP FELL OUT ABOVE ROOF BOLT ANCHORAGE WAS USING 4 FT RESIN BOLTS THE FACE WAS APPROX. 40 FT LONG 20 FT WIDE 6 FT HIGH LOCATION IN NO 4 ENTRY ON INTAKE AND TRACK AT SPAD NO 412.
HE WAS OPERATING CONTINOUS MINER EMPLOYEE WAS TRAMMING MINER WITH A REMOTE CONTROL BOX WHEN MINER HIT A ROLLING SECTION OF ROADWAY CAUSING CANOPY AND DECK TO BOUNCE SLIDING REMOTE BOX OVER AGA INST CANOPY HITTING LITTLE FINGER
EMPLOYEE WAS TRAVELING THROUGH A METAL MAN DOOR THE BOTTOM WAS WET AND MUDDY HE SLIPPED AND FELL.
EMPLOYEE WAS RAISING A JOINT OF RAILROAD STEEL WITH A JACK THE JACK EITHER DID NOT CATCH OR IT RELEASED BY ACCIDENT STRIKING EMPLOYEE ON THE CHIN.
HE WAS HELPING OPERATE CONTINOUS MINER WHILE DOING THIS HE WAS PULLING UP MINER CABLE AND STRAINED LEFT SHOULDER
RIDER SEAMS A COAL ABOVE THE ANCHORAGE OF 5 FT RESIN BOLTS THE FALL WAS APPROX. 12 FT THICK 18 FT WIDE 40 FT LONG LOCATED IN MO 2 INBY INBY SPAD 209.
RIDER SEAMS OF COAL ABOVE THE ANCHORAGE OF 5' RESIN BOLTS. THE FALL WAS APPROX. 12' THICK 18' WIDE 40' LONG LOCATED IN NO. 2 ENTRY INBY SPAD 209.
THIS INJURY IS 7HE RESULT OF A PRE-EXISTING INJURY DUE TO THE WORK ENVIRONMENT.
COAL SEAM ABOUT 6' HIGH ALLOWED THE ROOF TO FALL 18' WIDE 25' LONG 6' HIGH.
HE WAS LIFTING 6X6X6 TIMBER.WHILE DOING THIS HE STRAINED HIS RIGHT ELBOW.
HE WAS BENDING 5 ROOF BOLT. WHILE DOING THIS, HE STRAINED HIS RIGHT ARM. HE DID NOT MISS WORK UNTIL 9/14/87, NOR WAS THIS A MEDICAL AT THE TIME OF INJURY.
HE WAS GRINDING3METAL. WHILE DOING THIS, HE DROPPED THE METAL ON HIS MIDDLE FINGER ON RIGHT HAND.
HE WAS DRIVING 5 SCOOP. WHILE DOING THIS HE STOP TO GET OUT AND WHEN HE DID HE SPRAINED HIS LEFT ANKLE
HE WAS WALKING 7OWARD BELTLINE. WHILE DOING THIS HE SLIPPED AND FELL ON HIS RIGHT KNEE
HE WAS OPERATIN1 ROOF BOLT MACHINE WHILE DOING THIS THE DRILL BARRELL ON T HE ROOF BOLT MACHINE FELL STRIKING HIM ON THE RT MIDDLE FINGER
HE WAS BOLTING 7HE ROOF OF THE MINE, WHILE DOING THIS HE WAS USING A WRENCH TO GET DRILL STEEL OUT OF THE ROOF, WHEN HE DID THIS THE WRENCH SLIPPED OUT OF HIS HAND STRIKING HIM IN THE MOUTH
HE WAS OPERATIN1 ROOF BOLTING MACHINE. WHILE DOING THIS HIS FOOT SLIPPED AND WHILE TRYING TO CATCH HIMSELF HE HIT THE BOLTING MACHINE CAUSING THE HEAD DRIVE TO FALL STRICKING HIS HAND.
RIDER SEAMS AND3 HILL SEAMS 20FT WEDE 55 FT LONG 9FT THICK 5 FT RESIN BOLTS IN EFFECTED AREA #3 ENTRY RETURN AIR. SS # 265
RIDER SEAMS OF 7AOL ABOVE THE A OHDRAGE OF 5'RESIN.BOLTS.THE FALL WAS APPROX.12'THICK 18WIDE 30' LONG LOCATED IN NO.2 ENTRY AT SPAD NO.249.
HE WAS MOVING A3METAL SHELF WHILE DOING THIS A PIECE OF METAL SHELF FELL ON HIS LEFT HAND FRACTURING HIS LITTLE FINGER
WHILE DOING MAI3TANENCE WORK ON R AIL CAR HE CAUGHT HIS LEFT LITTLE FINGER BETWEEN THE RAIL AND THE COUPLING PEN.
OPERATING ROOFB2LTING MACHINE HAD HAND ON HEAD OF BOLTER AND PIECE OF ROCK FELL ON HAND.
WHILE HELPING C5RRY LARGE WATER PUMP HE SLIPPED AND STRAINED LEFT KNEE.ASSISTING 2 OTHER EMPL WHEN THEY STARTED DOWN SLOPE WHICH CAUSED STRAINED KNEE.
WHILE PRYING A 0OOT-SHAFT OF MINER WITH A SLATE BAR, THE PRY SLIPPED AND CUT HIS FINGER ON A PIECE OF METAL.
WHILE WORKING O3 A BELT LINE HE CAUGHT HIS HAND BETWEEN A TIMBER AND BELT STRUCTURE.
LOADING METAL STRAPS INTO SCOOP AND STRAINED HIS BACK.
DRILLING HOLE THROUGH METAL STRAP FOR ROOF BOLT & HOT METAL FRAGMENT FELL INTO HIS BOOT CAUSING BURNS CONTINUED TO WORK UNTIL 071085 WENT TO DOCTOR DURING HIS VACATION