Avísenme cuando se presente un nuevo incidente de la MSHA en No 2.
INJURED WAS REACHING ACROSS ROOF BOLTING MACHINE TO GET A SLATE BAR AND THE OPERATOR MOVED MACHINE WHILE HIS FOOT WAS IN FRONT OF TIRE.
INJURED WAS BLOCKING UP SEQUENCE SWITCH UNDR CONVEY0R BELT & PIECE OF BELT STRUCTURE CAME LOOSE STRIKING INJURED ON RIGHT FOREARM.
INSURED WAS OPERATING CONTINUOUS MINER. WATER HOSE PROVIDING WATER TO MINER BURSTED. OPERATOR STRUCK HIS RIGHT ELBOW AGAINST COAL RIB WHILE TRYING TO AVOID WATER SPRAY FROM BURSTED HOSE.
INJURED WAS TURQUEING ROOF BOLTS WITH TORQUE WRENCH HAD HIS RIGHT FOOT IN PATH OF ROOF BOLTER MACHINE, WHEN OPERATOR MOVED MACHINE HIS FOOT WAS RAN OVER.
INJURED WAS SETTING TIMBERS ON PILLAR LINE & PIECE OF ROCK FELL FROM ROOF WEAR THE RIB STRIKING INJURED ON ;SHOULDER.
INJURED WAS OPERATING 21 SHUTTLE CAR OR THE 002-0 SECTION THE SHUTTLE CAR RAN INTO 2 HOLE IN THE ROADWAY AND SHOOK THE OPERATOR UP PRETTY BAD.
INJURED WAS HELPING SPLICE 21SC CONVEYOR CHAIN. A SCOOP CAME THROUGH THE CROSSCUT, STRUCK THE SC, PUSHING THE CAR UPON INJURED.
INJURED WAS LOADING MINE TIMBERS INTO A SCOOP AND EXPERIENCED PAIN IN HIS BACK.
A ROCK FALL OCCURRED IN THE #4 ENTRY OF SECTION CATCHING THE TAILPIECE FEEDER. THE FALL DISCOVERED ABOUT 8 A M. THE FALL MEASRUED ABOUT 50 FEET LONG, 20 FEET WIDE, 10 FEET HIGH. NO ONE NEAR OR PRESENT AT THE TIME OF THE FALL. THERE WAS MINER DAMAGE TO TAILPEICE AND FEEDER.
A ROOF FALL OCCURRED IN THE NO. 6 ENTRY OF 2LT ENTRY DURING THE SHIFT CHANGE BETWEEN THE HOURS OF 4 PM ABD 8 PM. NO INJURY OR EQUIPMENT INVOLVED. THE FALL MEASURED APPROX. 30 FT LONG, 20 FT WI DE AND 3 1/2 " THICK.
INJURED WAS WALKING THROUGH THE SHOP AND TRIPPED ON AN UNKNOWN OBJECT, CAUSING HIM TO FALL AND HE SPRAINED HIS ANKLE.
A ROCK FALL OCCURRED DURING IDLE SHIFTS IN THE NO 2 BELT ENTRY.MEASURED AOPPROXIMATELY 10FT HIGH 35FT LONG 10 FT WIDE AND WAS DISCOVERED BY THE NIGHT SHIFT AFTER SHIFT STARTED.
A ROCK FALL OCCURRED ON THE 0020 SECTION IN THE NO 6 ENTRY LAST OPEN CROSSCUT.THE FALL MEASURED APPROXIMATELY 4 FT THIC 18 FT WIDE AND 50 FT LONG.THE FALL OCCURRED WHEN MINE WAS IDLE AND DISCO VERED BY SECOND SHIFT ABOUT 8:20 PM.NO INJURY OR DAMAGE TO EQUIPMENT.CRIBS INSTALLED AROUND FALL ACCESS.
A ROCK FELL OCCURRED SOMETIME DURING THE WORKING SHIFT IN THE NO 6 MAIN ENTRY OUTBY THE LAST OPEN XCUT FOR A DISTANCE OF ABOUT 40FT & ABOUT 4FT IN THE AREA NO ONE WORKING IN THIS AREA NO INJUR Y NO DAMAGE TO THE EQUIPMENT DID NOT CLEAN UP CRIBED AROUND FALL
INJURED WAS HELPING REPAIRMAN SPLICE CONVEYOR CHAIN ON MINER AND WHILE HOLDING A HANDLE PUNCH. THE REPAIRMAN STRUCK THE PUNCH WITH A HAMMER AN GLANCED OFF, STRUCK INJURED ON HIS THUMB.
INJURED WAS INSTALLING ROOF BOLTS AND A PIECE OF ROCK FELL FROM THE ROOF STRICKING INJURED ON HIS RIGHT HIP.
ROOF FALL OCCURRED ON CONVEYOR BELT BETWEEN THE 3:30 AND 10:00 P.M. THE FALL MEASURED APPROX. 10X20X6. THE FALL FELL ABOVE THE BOLT ANCHORAGE ZONE. THE FALL WAS DISCOVERED BY AN EMPLOYEE.
THE INJURED WAS IN THE PROCESS OF HANDLING THE MINER CABLE DURING THE MINING CYCLE WHE STOOPING OVER TO PICK UP AND PULL THE CABLE HAD PAIN IN SHIS BACK.
I.NAME INJURED 4AS LOADING THE TRAILING CABLE ON THE HEAD OF THE 14-10 JOY LOADER AND IN THE PROCESS OF PICKING UP THE CABLE HAD PAIN IN HIS BACK
ROOF FALL IN NO1 1 ROOM BEGINNING ABOUT 10' INBY MOUTH OF ROOM INTO THE FIRST CROSSCUT A DISTANCE OF ABOUT 50-60' AT A HEIGHT OF ABOUT 5 FT. NO INJURIES OR DAMAGE REPORTED BY FOREMAN.
INJ WAS REMOVIN1 ROOF BOLTS OFF TRAILING CABLE THAT HAD FALEN OFF ROOF BOLTING BMACHINE. HIS HELPER MOVED MACHINE BACKWARDS CATCHING HIS RT FOOT BENEATH MACHINE. POSSIBLE FRACTURE OF BIG TOE ON RT FOOT BRUI8E AND LACERATION
INJ WAS OPERATI3G BATTERY POWERED RUBBER TIRED TRACTOR, PULLING MANTRIP FROM FACE TO THE SURFACE AND STEERING SHAFT CAME LOOSE AND STEERING WHEEL WAS WRENCH FROM HIS HAND CAUSING FRACTURE OF T HIRD FINGER, LE0T HAND