Avísenme cuando se presente un nuevo incidente de la MSHA en Faith Mine.
| Trimestre | Horas trabajadas | Citaciones | S&S | Por 1M hrs |
|---|---|---|---|---|
| 2005 Q3 | 0 | 0 | 0 | |
| 2005 Q2 | 0 | 0 | 0 | |
| 2005 Q1 | 0 | 1 | 0 | |
| 2004 Q4 | 0 | 9 | 0 | |
| 2004 Q3 | 0 | 18 | 0 | |
| 2004 Q2 | 26,744 | 23 | 14 | 860.0 |
| 2004 Q1 | 25,614 | 13 | 3 | 507.5 |
| 2002 Q4 | 9,414 | 3 | 0 | 318.7 |
Employee was backing shuttle car up with right leg hanging out of car. He caught his ankle between shuttle car deck and coal rib.
A rock fall occured in the #6 entry 4 breaks inby #7 head-drive. The fall measured 19'W X 60'L X 4'H.
A roof fall ocurred 2 breaks outby face in the intersection at spad #5983. The fall measured 36'L X 17'W X 5'H.
A roof fall occured one break inby spad number 5801 in the #8 entry. The fall measured 48"H X 18'W X 20'L.
Employee was pulling a cathead across scoop batteries and felt pain in lower back.
Employee was moving belt structure out of roadway and felt sharp pain in lower back. (Started missing work on 8/19/2004.
Employee was driving a shuttle car and went through a dip and the shuttle car bottomed out causing pain in the lower back.
Employee was pulling miner cable and felt a sharp pain in his lower back.
A roof fall occurred one break inby spad number 5152 in the #5 entry on the #5 conveyor belt. The fall measured 4'H X 20'W X 20'L.
Employee was riding on mantrip, mantrip run into rib causing employee to hit his head and ear on mantrip.
Employee was making a cable splice and while hitting the knocker a piece of metal chiped off hitting him in the right thumb. Required 4 stitches.
WAS USING SLATE BAR TO MOVE HYD HOSES OUT WAY TO INSTALL DRIVE SHAFT ON SCOOP. BAR SLIPPED MASED RIGHT RING FINGER.
A ROOF FALL OCCURED NEXT TO THE AT CROP IN THE #6 AND 9 ENTRY FALL 60" X 20' X 40' LONG FALL WAS CLEANED UP LONGER BOLTS INSTALLED AROUND ARE MSHA AND CO SCOPED TOP TO MAKE SURE NOTHING ELSE E XISTED THE AREA.
EE WAS CUTTING INSULATION FROM A SHUTTLE CAR CAV
EE WAS INSTALLING ROOF BOLT AND THE HYDRAULIC HOSE PROVIDING PRESSURE TO THE ROTATION OF THE DRILL HEAD RUPTURED SPRAYING HYDRAULIC OIL IN HIS FACE SOME OF THE OIL HIT HIS EYES EVEN THOUGH HE WAS WEARING SAFETY GLASSES.
HE BACKED THE CONTINUOUS MINER OUT TO SET OVER TO THE OTHER SIDE. WHEN HE SPLIT HIS CATS THE MINER SLEW OVER AND CAUGHT HIS SIDE AND LEFT AGAINST THE RIB. AND THE HEAD OF MINER WAS SITTING ON HIS FOOT "LEFT". NO BITS WERE IMPALING HIS BODY OR FOOT. HE REFUSED MEDICAL ATT.
EE WAS PUSHING BOLT OVER A HOLE AND FELT A SHARPPAIN IN HIS LOWER ABDOMEN.
EE WAS PULLING A MINER CABLE AND FELT PAIN IN LOWER BACK.
LIFTING A BONDER TO PUT ON A REPAIRMAN'S BUGGY. HURTING HIS LOWER BACK.
EE WAS REPLACING SKIRTING IN #3 TAILPIECE. WHILE CUTTING THE SKIRT RUBBER WITH A UTILITY KNIE, IT SLIPPED, CUTTING HIS LEG.
EMPLOYEE WAS PLACING A BOLT IN A DRILLED HOLE AND FELT SHARP PAIN IN LOWER BACK.
WHILE LOADING SUPPLIES. EMPLOYEE LIFTED A BOX TO THE FRONT OF THE BOLTER, AND FELT A SHARP PAIN IN LOWER BACK. LOST TIME BEGAN JULY 31, 2002.
WHILE LOADING CABLE ON MINER, EE FELT BURNING SENSATION IN LOWER RIGHT SIDE OF ABDOMEN.
EE WAS UNLOADING 36" TOP BELT STRUCTURE FROM MINE BUGGY WHEN HE FELT PAIN IN HIS LOWER BACK.
EE WAS PULLING CABLE, MAKING POWER MOVE ON SECTION. HE RE-INJURED HIS LEFT ARM THAT HE ORIGINALLY HURY ON 7/30/01 BUT DID NOT REPORT OR GO TO DOCTOR.
EE WAS PULLING CATCH BACK ON RED-DEVIL. IT SLIPPED AND BROKE, CUT R THUMB.
EE WAS TRAMMING A SCOOP WHEN HE HIT A HOLE IN THE ROAD AND HURT HIS BACK.
EMPLOYEE WAS TRAMING SCOOP, SCOOP FLIPPED A BOARD UP HITTING HIM INT HE RIGHT SIDE OF THE FACE.
EMPLOYEE WAS REPLACING TRAM MOTOR. WHEN HE SLIPPED THE MOTOR INTO PLACE HE FELT PAIN IN HIS LOWER BACK.
EE WAS SPLICING CONTROL CABLE FOR 6 BOLT STARTED TO STAND AND HIS KNEE POPED AND GAVE OUT ON HIM.
WHILE BOLTING TOP, THE OPERATOR BACKED INTO A ROOF BOLT PLATE THAT WAS HANGING DOWN FROM THE TOP. THE SHARP EDGE OF THE ROOF BOLT PLATE STRUCK THE OPERATOR ON THE BACK OF THE NECK CAUSING A LA CERATION TO THE BACK OF HIS NECK.